220X POWER ZOOM CAMERA
SCC-C4201(P), C4203(P),
C4301(P), C4303(P)
E
D
F
Owner’s Instructions
Gebrauchsanleitung
Guide d’utilisation
Guía del usuario
Istruzioni per l’uso
Es
I
220x P
o
w
er Zoom
LO
W LIGHT
C
D
IG
IT
A
L
O
LO
R
C
A
M
ER
A
Part : AB68-00366A
Printed in Korea
✽
Be sure to read the "Safety Precautions" in this manual
to ensure correct use and operation of this product.
Contents
Cautions
1. Overview.............................................................5
2. Part Names and Functions ...............................6
3. Installation........................................................ 8
1. Do not drop objects on the product or apply strong
shock to it. Keep away from a location subject to
excessive vibration or magnetic interference.
Checking the Package Contents ....................... 8
Preparing the Cables ........................................ 9
Connecting the Cables .................................... 10
2. Do not install in a location subject to high
temperature, low temperature, or high humidity.
(Doing so may cause fire or electrical shock.)
E
4. Navigating the Setup Menu........................... 12
3. Avoid a location which is exposed to direct sunlight,
or near heat sources such as heaters or radiators.
(Neglecting to do so may result in a risk of fire.)
Structure of the Setup Menu ........................... 12
- CAMERA ID................................................... 16
- IRIS................................................................ 17
- BLC................................................................ 17
- ALC ............................................................... 17
- MANU............................................................ 18
- SHUTTER...................................................... 19
- AGC (MOTION)............................................. 20
- WHITE BAL ................................................... 21
- SPECIAL ....................................................... 22
- AUTO FOCUS............................................... 24
- MOTION DET................................................ 24
- PRESET ........................................................ 25
- COLOR/ BW.................................................. 26
- EXIT............................................................... 28
4. If you want to relocate the already installed product,
be sure to turn off the power before moving or
reinstalling it.
5. Install in a well-ventilated location.
6. Remove the power plug from the outlet when there
is a lightning storm. (Neglecting to do so may cause
fire or damage to the product.)
5. Specifications ............................................... 29
6. Others ............................................................ 33
3
4
Overview
1
Part Names and Functions
2
This camera is a high performance surveillance camera that
provides a maximum of 220x zoom surveillance capability
with its 22x optical zoom lens and digital zoom IC.
It is a multifunction camera that is equipped with all of the
key features of the existing surveillance cameras :
G
Day & Night function (SCC-C4203(P), C4303(P)) that
ensures sharp and clear images even at night.
E
220x Power Zoom
LOW LIGHT
DIGITAL COLOR CAMERA
G
Low - Light Surveillance function that enables image
capture even under extremely low light conditions.
SET-UP button
G
White Balance function that provides accurate color
rendition under any light conditions.
G
BLC function that enables effective back light
compensation even under a spotlight or a very bright
incident light.
Instead of “POWER”, “DC IN”
is writtern in
SCC-C4201(P)/4203(P).
Instead of “POWER”, “PWR
IN” and instead of “GND”,
“DC12&AC24V” is writtern in
SCC-C4301(P)/4303(P).
G
Auto Focus function that automatically tracks and focuses
on the moving subject.
REMOTE
RS-485
POWER
G
RS485/ Wired remote control function.
Broadcast System
G
SCC-C4201/ C4203/ C4301/ C4303 : NTSC System
SCC-C4201P/ C4203P/ C4301P/ C4303P : PAL System
SET-UP button
G
The function of the SET-UP button varies depending on
whether you are currently in Normal Operation mode (i.e.,
the Setup Menu is not displayed) or Setup Menu mode.
Power System/Power Consumption
G
SCC-C4201(P), C4203(P) : DC 12V/5.0W
G
SCC-C4301(P), C4303(P) : AC 24V, DC 12V/5.5W
In Normal Operation Mode
ꢀ
- UP/ DOWN buttons : Use as the ZOOM Tele button
and the ZOOM Wide button respectively.
- LEFT/ RIGHT buttons : Use as the FOCUS Near
button and the FOCUS Far button respectively.
- SET- UP button: Use to enter the Setup Menu.
Hold the SET- UP button for longer than 3 seconds to
enter the Setup Menu.
5
6
In Setup Menu Mode
ꢀ
Installation
3
- UP/ DOWN buttons: Use to move the cursor up or down.
- LEFT/ RIGHT buttons: Use to move the cursor left or
right, or to sequentially view the values that can be
assigned to a parameter.
Before Installation
- ENTER button: Use to select a Sub Menu item, and to
accept the current value.
Checking the Package Contents
Make sure that the following accessories are included in
the package.
ZOOM/ FOCUS REMOTE terminals
E
Use to control ZOOM/ FOCUS from an external controller.
Depending on the input conditions, the terminals can be
set to 4 different modes.
(Operating Voltage Range : +3V ~+13V, -3V~-13V)
Near
-6V
+6V
-6V
Item
Tele
-6V
-6V
+6V
+6V
Wide
+6V
+6V
-6V
Code
Far
+6V
-6V
+6V
-6V
A
B
220x
DIGIT
P
C
D
o
wer Zoom
LO
W
LIGHT
AL COLOR CAMERA
+6V
-6V
Caution : In the event of a simultaneous input of RS485 and
wired remote control signal, whichever was input first
will be activated.
SCC-C4201(P),C4203(P),
C4301(P),C4303(P)
User's Guide
(For a camera with the ROM version 1.2 or above,
please refer to page 33.)
ALARM OUT terminal
An alarm signal is output from this terminal when the
MOTION DET mode is activated or BW mode is activated.
(Open Collector DC24V 40mA Max)
:
VIDEO OUT terminal
Connect the monitor's VIDEO IN. The video signal from
the camera is transmitted to the monitor via this terminal.
Mount Adapter
Screw (2)
Terminal Block
RS485 terminal
RS485 remote control terminal.
Power LED
Lights when power is on.
POWER IN terminal
Plug in the power adapter here.
7
8
Preparing the Cables
Connecting the Cables
To install and use the camera, first prepare the following
cables.
1. Connect one end of the BNC cable to the VIDEO OUT.
2. Connect the other end of the BNC cable to the VIDEO IN
of the monitor.
The requirements for the power adapter, which connects to
the camera's POWER IN terminal, are as follows:
G
SCC-C4201(P), SCC-C4203(P) : DC12V 600mA
SCC-C4301(P), SCC-C4303(P) : AC24V 300mA
G
E
DC12V 600mA
Video terminals on the back
of the monitor
BNC cable
REMOTE
RS-485
POWER
3. Plug in the power adapter. Use a "minus" screwdriver to
connect one part of the power adapter, which consists of two
lines, to the POWER terminal of the camera as follows :
Video Cable
Use a BNC cable, such as the one shown below, to connect
the camera's VIDEO OUT to the monitor.
POWER SELECTION switch
underneath the power adapte
POWER SELECTION
REMOTE
RS-485
POWER
switch underneath the
power adapte
9
10
Navigating the Setup Menu
4
4. Determine the type of power supply and set the POWER
SELECTION switch accordingly. Next, plug the power
adapter into a wall outlet.
In this chapter, we will take a look at the menu system of the
SCC-C4201(P), C4203(P), C4301(P), and C4303(P). First,
we will take a look at the structure of the Setup Menu and
then describe the functions of each menu item in the menu.
The requirements for the power adapter for each model are
as follows:
Structure of the Setup Menu
G
SCC-C4201(P), SCC-C4203(P) : DC12V 600mA
SCC-C4301(P), SCC-C4303(P) : AC24V 300mA
E
G
G
Structure of the Setup Menu of the SCC-C4201(P)
DC12V 600mA
CAMERA ID
IRIS
OFF/ON...
5. If the camera operates normally, the following screen will
be displayed for 5 seconds and then disappears.
ALC.../MANU...
OFF/1/100(1/120) ~ 1/10K
/AUTO X2~X128/FIX X2~X128
SHUTTER
SAMSUNG PROTOCOL
ADDR : 0
TYPE : RS-485, HALF
BAUD : 9600
AGC
OFF/LOW/HIGH
S.S/SLOW/NORMAL/FAST/F.F
ATW/AWC/MANU...
...
MOTION
WHITE BAL
SPECIAL
LENS CHECK : OK!
LANGUAGE
CTRL TYPE
RS-485
ENGLISH
A/B/C/D
...
6. The requirements for RS485 control is as follows :
G
Signaling Speed: 9600 bps
PIP
OFF/ON...
OFF/ON
OFF/X2 ~ X10
+/-
G
Data Bit : 8 bits
MIRROR
G
Stop Bit : 1 bit
D-ZOOM
G
Parity Bit : none
POSI/NEGA
ZOOM SPEED
1/2/3/4
----I----
DETAIL(0)
RET
AUTO FOCUS
MOTION DET
PRESET
AF/MF/ONEAF
OFF/ON...
...
EXIT
QUIT/SAVE/PRESET
11
12
Structure of the Setup Menu
G
G
Structure of the Setup Menu of the SCC-C4301(P)
Structure of the Setup Menu of the SCC-C4203(P)
CAMERA ID
IRIS
OFF/ON...
CAMERA ID
IRIS
OFF/ON...
ALC.../MANU...
ALC.../MANU...
OFF/1/100(1/120) ~ 1/10K
/AUTO X2~X128/FIX X2~X128
OFF/1/100(1/120) ~ 1/10K
/AUTO X2~X128/FIX X2~X128
SHUTTER
SHUTTER
E
AGC
OFF/LOW/HIGH
S.S/SLOW/NORMAL/FAST/F.F
ATW/AWC/MANU...
...
AGC
OFF/LOW/HIGH
S.S/SLOW/NORMAL/FAST/F.F
ATW/AWC/MANU...
...
MOTION
WHITE BAL
SPECIAL
MOTION
WHITE BAL
SPECIAL
LANGUAGE
CTRL TYPE
RS-485
ENGLISH
LANGUAGE
ENGLISH
A/B/C/D
...
V-SYNC
INT/LINE...
A/B/C/D
...
CTRL TYPE
RS-485
PIP
OFF/ON...
OFF/ON
OFF/X2 ~ X10
+/-
MIRROR
D-ZOOM
POSI/NEGA
ZOOM SPEED
DETAIL(0)
RET
PIP
OFF/ON...
OFF/ON
OFF/X2 ~ X10
+/-
MIRROR
D-ZOOM
POSI/NEGA
ZOOM SPEED
DETAIL(0)
RET
1/2/3/4
----I----
1/2/3/4
----I----
AUTO FOCUS
MOTION DET
PRESET
AF/MF/ONEAF
OFF/ON...
AUTO FOCUS
MOTION DET
PRESET
AF/MF/ONEAF
...
OFF/ON...
COLOR/BW
EXIT
COLOR/BW/AUTO...
QUIT/SAVE/PRESET
...
EXIT
QUIT/SAVE/PRESET
13
14
(SET UP)
(SET UP)
CAMERA ID
IRIS
SHUTTER
AGC
Structure of the Setup Menu
CAMERA ID
OFF
OFF
ALC...
OFF
LOW
ATW
...
IRIS
SHUTTER
AGC
ALC...
OFF
LOW
ATW
...
ONEAF
OFF
G
Structure of the Setup Menu of the SCC-C4303(P)
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
COLOR/BW
EXIT
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
ONEAF
OFF
...
CAMERA ID
IRIS
OFF/ON...
...
COLOR
QUIT
EXIT
QUIT
ALC.../MANU...
OFF/1/100(1/120) ~ 1/10K
/AUTO X2~X128/FIX X2~X128
[SCC-C4201(P),SCC-C4301(P)]
[SCC-C4203(P),SCC-C4303(P)]
SHUTTER
E
AGC
OFF/LOW/HIGH
S.S/SLOW/NORMAL/FAST/F.F
ATW/AWC/MANU...
...
The COLOR/BW option is available only with the
SCC-C4203(P) and C4303(P).
MOTION
WHITE BAL
SPECIAL
CAMERA ID
LANGUAGE
V-SYNC
ENGLISH
In the CAMERA ID menu, you can assign an ID to the camera
that appears on the monitor screen. If you select ON...
for CAMERA ID and press the ENTER button, a screen from
which you can assign a camera ID will appear.
INT/LINE...
A/B/C/D
...
CTRL TYPE
RS-485
You can use alphanumeric characters and a few special
characters that are displayed on the screen to assign a
maximum of 20 characters for the CAMERA ID.
You can use the LOCATION option to place the camera ID
anywhere on the screen.
PIP
OFF/ON...
OFF/ON
OFF/X2 ~ X10
+/-
MIRROR
D-ZOOM
POSI/NEGA
ZOOM SPEED
DETAIL(0)
RET
1/2/3/4
----I----
(SET UP)
(CAMERA ID)
CAMERA ID
IRIS
ON...
ALC...
OFF
A B C D E F G H
M N O P Q R S T U V W X
I
J
K
L
SHUTTER
AGC
LOW
ATW
...
ONEAF
OFF
Y Z
:
0
!
1
-
2
+
3
*
4
(
5
)
6
/
7
8
9
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
AUTO FOCUS
MOTION DET
PRESET
AF/MF/ONEAF
Press the
ENTER
button.
SP
SP
LOCATION...
RET
OFF/ON...
...
...
COLOR/BW
EXIT
COLOR
QUIT
ZOOM.CAMERA.........
COLOR/BW
EXIT
COLOR/BW/AUTO...
QUIT/SAVE/PRESET
15
16
If you set the AREA option to USER and press the ENTER
button, you can customize the area to which the BLC function
will be applied. You can specify the size of the area by using
the UP, DOWN, LEFT, and RIGHT buttons. After setting the
size of the area, press the ENTER button. The specified area
will start flashing. Then, you can use the UP, DOWN, LEFT
and RIGHT buttons to specify the location of the area.
Use the ENTER button and the UP, DOWN, LEFT and
RIGHT buttons to specify the size of the area and to position
the area. Press the ENTER button again to exit the AREA
setting menu.
IRIS
The level of video output to the monitor can be controlled by
the iris lens according to the intensity of the incoming light.
This product is equipped with an iris lens. In the ALC (Auto
Light Compensation) menu, you can set the video output
level. In the MANU menu, you can manually set the opening
and closing of the iris.
BLC (Option in the ALC Menu)
E
If you use an ordinary camera when a strong light source,
such as a spot light, is shining from behind the subject, the
subject will appear dark on the monitor because of the back
light. For the SCC-C4201(P), C4203(P), C4301(P), and
C4303(P), appropriately set the BLC in the ALC menu to
solve the back -light problem and have a clear picture even
under a spotlight or a very bright incident light.
SIZE
SIZE
Use the UP,
DOWN,
©
©
LEFT, and
RIGHT
buttons.
ALC
POSITION
POSITION
If you select ALC for IRIS and press the ENTER button, a
screen from which you can set the video output level and BLC
will appear. In the LEVEL option, you can use the LEFT/
RIGHT buttons to set the video output level. If you set the
BLC to ON, the BLC function will be applied to the screen
area specified in the AREA option. The AREA option can be
set to either PRESET or USER to specify the screen area to
which the BLC function will be applied. If you set the AREA
option to PRESET, the BLC function will be applied to the
area specified at the time of factory shipment.
MANU
If you select MANU for IRIS and press the ENTER button, a
screen from which you can manually adjust the iris to a
desired level will appear. In the LEVEL option, you can use
the LEFT/ RIGHT buttons to set the manual opening and
closing of the iris.
(SET UP)
(MANUAL)
CAMERA ID
IRIS
SHUTTER
AGC
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
OFF
(SET UP)
(ALC)
MANU...
OFF
LOW
ATW
...
ONEAF
OFF
...
CAMERA ID
IRIS
OFF
ALC...
OFF
SHUTTER
AGC
LOW
ATW
...
ONEAF
OFF
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
Press the
ENTER
button.
Press the
ENTER
button.
AREA
BLC
LEVEL
RET
PRESET...
OFF
( 0) ----I----
LEVEL ( 00) ----I----
RET
COLOR/BW
EXIT
COLOR
QUIT
...
COLOR/BW
EXIT
COLOR
QUIT
17
18
SHUTTER
AGC (MOTION)
In the AGC (Automatic Gain Control) option, you can specify
whether to automatically control the GAIN when the obtained
video is below a certain level of brightness because it was
recorded under insufficient lighting. To automatically control
the GAIN, set the AGC option to LOW or HIGH. Otherwise,
set it to OFF. If the you set the AGC option to LOW, the
maximum GAIN of the AGC will be set to low, and if set to
HIGH, the maximum GAIN will be set to high.
In the SHUTTER option, you can specify the speeds of the
high-speed electronic shutter, auto low-speed shutter, and fix
low-speed shutter. The high - speed electronic shutter
supports 7 shutter speeds from 1/100 seconds to 1/10K
seconds, and the auto low-speed shutter and fix low-speed
shutter support 12 shutter speeds from 2x to 128x
respectively. The low-speed shutter allows you to set the
shutter speed to a slow setting to obtain a clearer video
when shooting in dark lighting conditions. Select an auto
low -speed shutter in order to have the camera detect the
amount of light and automatically set the shutter speed to a
slow setting according to the degree of darkness. Select an
item that starts with "FIX" to specify the shutter speed
yourself. The numbers that immediately follow the "AUTO"
and "FIX" indicate the number of accumulated fields.
The higher the field number, the slower the shutter speed.
Accordingly, a still picture will be sharper. In the case of
video, an image captured of an object will be blurry.
If the SHUTTER option is set to an auto low-speed, the AGC
option will change to the MOTION option. In the MOTION
option, use the LEFT and RIGHT buttons to select from S.S,
SLOW, NORMAL, FAST, and F.F.
E
(SET UP)
CAMERA ID
IRIS
SHUTTER
MOTION
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
OFF
ALC...
AUTOX4
NORMAL
ATW
...
ONEAF
OFF
...
COLOR/BW
EXIT
COLOR
QUIT
(SET UP)
S.S : Select to maximally enhance the resolution of a still
image by increasing the lowest value of AGC GAIN and
the scale of low speed shutter to their maximum.
(This is used mainly to monitor almost still objects in dark
places.)
SLOW : Select to enhance the resolution of a still image
as much as possible by increasing a low value of AGC
GAIN and the scale of low speed shutter. (This is used
mainly to monitor objects that make a small movement in
dark places.)
CAMERA ID
IRIS
OFF
ALC...
OFF
ꢀ
ꢀ
SHUTTER
AGC
LOW
ATW
...
ONEAF
OFF
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
...
COLOR/BW
EXIT
COLOR
QUIT
NORMAL : Select to display the normal picture with a
medium value of AGC GAIN and the scale of normal
speed shutter. (This is used mainly to monitor moving
objects in dark places.)
FAST : Select to focus on the moving objects by
decreasing a high value of AGC GAIN and the scale of
normal speed shutter. (This is used mainly to monitor
objects showing active movements in dark places.)
ꢀ
ꢀ
SHUTTER
©OFF © 1/100(1/120) © 1/250 © 1/500 © 1/1000 © 1/2000 ©
1/4000 © 1/10K © OFF © AUTOX2 © AUTOX4 © AUTOX6 ©
AUTOX8 © AUTOX12 © AUTOX16 © AUTOX24 © AUTOX32
© AUTOX48 © AUTOX64 © AUTOX96 © AUTOX128 © OFF
© FIXX2 © FIXX4 © FIXX6 © FIXX8 © FIXX12 © FIXX16 ©
FIXX24 © FIXX32 © FIXX48 © FIXX64 © FIXX96 © FIXX128
F.F : Select to focus on the moving objects by
ꢀ
decreasing the highest value of AGC GAIN and the scale
of low speed shutter to their minimum. (This is used
mainly to monitor fast moving objects in dark places.)
19
20
WHITE BAL
SPECIAL
You can manually adjust the LANGUAGE, V-SYNC, CTRL TYPE,
RS485, PIP, MIRROR, D-ZOOM, POSI/ NEGA, ZOOM SPEED,
and DETAIL.
In the WHITE BAL option, you can set the White Balance
function, which enables you to see the white color correctly
under illumination of any color temperature. If you set the
WHITE BAL option to ATW, the camera will continuously
monitor changes in the ambient color temperature and
automatically set the White Balance according to the color
temperature. If you set the WHITE BAL option to AWC, place
a piece of white paper in front of the camera, and press the
ENTER button, the Auto White Balance Control will be
activated just once to set the color temperature and this
value will be maintained.
The V-SYNC option is available only with the SCC-C4301(P)
and C4303(P).
If you press the ENTER button while in "---" is shown, the
SPECIAL screen from which you can set the special functions
will appear. When activating each function, use the LEFT and
RIGHT buttons to set the desired item.
E
(SET UP)
CAMERA ID
IRIS
SHUTTER
AGC
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
COLOR/BW
EXIT
(SPECIAL)
LANGUAGE
V-SYNC
CTRL TYPE
RS-485
OFF
ALC...
OFF
LOW
ATW
...
ONEAF
OFF
ENGLISH
INT
A
If you set the WHITE BAL option to MANUAL, you can
customize the white balance to take into account the current
lighting condition.
...
PIP
OFF
OFF
OFF
+
MIRROR
D-ZOOM
POSI/NEGA
ZOOM SPEED
DETAIL
Press the
ENTER
button.
3200°K : Select to set the color temperature to 3200°K.
...
3
ꢀ
ꢀ
ꢀ
COLOR
QUIT
(0) ----I--
RET
5600°K : Select to set the color temperature to 5600°K.
USER : Select to set the color temperature by selecting
ꢀ V - SYNC : Specify the vertical synchronization method that
appropriate values from the RED and BLUE
graphs.
will be used by the SCC-C4301(P) and C4303(P).
There are 2 types of vertical synchronization signal that the
camera supports : INT mode in which the signal is generated
by the camera's internal clock and LINE mode which sets the
vertical synchronization by the external power frequency. If
you select LINE and press ENTER button, the LL-PHASE
screen from which you can adjust the phase of LINE LOCK
will appear. You can specify the desired phase level in the
PHASE option.
MANU : If you select the MANU option and press the
ENTER button, a screen from which you can manually select
the white balance will appear. In the PRESET option, use the
LEFT and RIGHT buttons to select 3200°K, 5600°K, or
USER.
(SET UP)
(AWB/MANU)
(SPECIAL)
(LL-PHASE)
CAMERA ID
IRIS
OFF
ALC...
OFF
LANGUAGE
V-SYNC
CTRL TYPE
RS-485
ENGLISH
LINE...
A
SHUTTER
AGC
LOW
MANU...
...
ONEAF
OFF
...
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
PIP
OFF
OFF
OFF
+
MIRROR
D-ZOOM
POSI/NEGA
ZOOM SPEED
DETAIL
Press the
ENTER
button.
Press the
ENTER
button.
PRESET OFF(USER)..
RED
BLUE
RET
(-2C) ---I----
(-5B) -I------
...
3
COLOR/BW
EXIT
COLOR
QUIT
PHASE (0)
RET
----|----
(0) ----I--
RET
If you are using DC power supply, it will work only in INT mode.
For LINE mode operation, use the AC power adapter (50Hz).
21
22
CTRL TYPE : You can select the A, B, C, or D mode
depending on the input of the wired remote control terminal.
(See page 7.)
AUTO FOCUS
In the AUTO FOCUS option, you can specify the Focus
method to AF, MF, or ONEAF.
ꢀ
ꢀ
RS-485 : It sets up ADDRESS, PROTOCOL, and BAUD
RATE of RS-485 communication.
(BAUD RATE: 2400bps, 4800bps, 9600bps, 19200bps, 38400bps)
AF : Focuses automatically by continuously monitoring the
ꢀ
screen in AUTO FOCUS mode. It does not process the
FOCUS button input because it focuses automatically
during ZOOM.
Caution : A communication error may occur if you connect
more than one camera set with an identical address.
MF : You can manually adjust
the focus.
(SET UP)
ꢀ
CAMERA ID
IRIS
OFF
ALC...
OFF
LOW
ATW
...
AF
OFF
...
E
PIP : This is the Picture in Picture feature. It will show a
ꢀ
SHUTTER
AGC
ONEAF : Focuses about 5
seconds only when ZOOM is
moved Wide to Tele. It is same
as MF mode while in STOP
mode, and same as AF mode
after ZOOM Tele.
screen reduced by 1/16 of the main screen only when
operating the Digital Zoom. If you set the PIP option to ON
and press the ENTER button, you can use the UP, DOWN,
LEFT, and RIGHT buttons to set the PIP position.
ꢀ
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
COLOR/BW
EXIT
COLOR
QUIT
* The PIP feature does not work in a low speed shutter mode.
The MIRROR feature does not work on the PIP window
.
(SPECIAL)
EANGUAGE
V-SYNC
CTRL TYPE
RS-485
ENGLISH
LINE...
A
MOTION DET
In the MOTION DET option, you can set the Motion
Detection function, motion detection sensitivity, and the
motion detection area. If you set the Motion Detection
function, you can detect an intruder's movement and check it
through the monitor and the ALARM OUT terminal.
...
PIP
ON
OFF
OFF
+
PIP
MIRROR
D-ZOOM
POSI/NEGA
ZOOM SPEED
DETAIL
Press the
ENTER
button.
3
(0) ----I--
RET
If you set ALARM which is located under COLOR/BW
AUTO menu to ON while MOTION DET remains ON, the
ALARM output port can not send any motion.
MIRROR : Horizontally flips the video output signal.
D-ZOOM : Sets the magnification of the Digital Zoom.
The magnification level can be set to up to 10x.
POSI/ NEGA : Outputs the video output signal normally or
inversely.
ZOOM SPEED : In the ZOOM SPEED option, use the
LEFT and RIGHT buttons to set the speed as follows:
ꢀ
ꢀ
ꢀ
ꢀ
(SET UP)
(MOTION DET)
CAMERA ID
OFF
IRIS
SHUTTER
AGC
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
COLOR/BW
EXIT
ALC...
OFF
LOW
ATW
...
ONEAF
ON...
...
COLOR
QUIT
1 : Takes about 17 seconds from 1 x to 22 x magnification (slowest speed).
2 : Takes about 10 seconds from 1 x to 22 x magnification (slow speed).
3 : Takes about 6 seconds from 1 x to 22 x magnification (fast speed).
4 : Takes about 3 seconds from 1 x to 22 x magnification (fastest speed).
Press the
ENTER
button.
AREA
SENSITIVITY
RET
PRESET...
MEDIUM
DETAIL: Adjusts the sharpness.
ꢀ
23
24
If you select ON and press the ENTER button, the MOTION
DET screen will come up. You can set the AREA to which the
Motion Detection function will be applied to either PRESET or
USER. If you set the AREA option to PRESET, the Motion
Detection function will be applied to the areas preset as factory
defaults. If you set the AREA option to USER and press the
ENTER button, you can change the area size and position and
select the area where you want to apply the Motion Detection
function. You can specify the size of the area by using the UP,
DOWN, LEFT, and RIGHT buttons. If the area is not flashing,
press the ENTER button. When the area starts flashing, use the
UP, DOWN, LEFT and RIGHT buttons to specify the location of
the area. Use the ENTER button and the UP, DOWN, LEFT,
and RIGHT buttons to specify the size of the area and to
position the area. Press the ENTER button again to exit the
AREA setting menu. You can use the SENSITIVITY option to
set the motion detection sensitivity. The higher the setting, the
more sensitive the motion detection.
(PRESET MAP)
PRESET NO. 0
0
H
1
2
3
8
13
18
23
28
4
9
14
19
24
29
RET
OFF
5
6
7
POSITION SET
PRESET ID
...
ON...
10
15
20
25
30
11
16
21
26
31
12
17
22
27
Press the
ENTER
button.
HOME RETURN
EXIT
QUIT
EXIT
QUIT
If you select a preset number and press the ENTER button, a screen
that looks as above will appear.
E
POSITION SET : Select to store the ZOOM and FOCUS
positions.
ꢀ
PRESET ID : Select to set an ID for the PRESET position,
as you did with Camera ID.
ꢀ
The HOME RETURN function is available with a camera
with the ROM version 1.2 or above. For instruction on the
use of this function, please refer to page 33.
SIZE
SIZE
Use the UP,
DOWN,
©
©
LEFT, and
RIGHT
COLOR / BW
buttons.
The COLOR / BW option is available only with the SCC-C4203(P)
and C4303(P).
POSITION
POSITION
In the COLOR / BW option, you can set the IR (infrared) Filter to ON or
OFF. In the BW mode, the IR Filter is turned OFF and the level of
sensitivity is increased to a level comparable to a black and white
camera. In the COLOR mode, on the other hand, the IR Filter is turned
ON and the screen turns normal, as the level of sensitivity is decreased.
PRESET
(SET UP)
CAMERA ID
IRIS
SHUTTER
AGC
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
COLOR/BW
EXIT
(PRESET MAP)
OFF
ALC...
OFF
LOW
ATW
...
ONEAF
OFF
0
H
1
2
3
8
13
18
23
28
4
9
14
19
24
29
RET
OFF
5
6
7
10
15
20
25
30
11
16
21
26
31
12
17
22
27
COLOR : The IR Filter is ON and the screen is normal.
ꢀ
ꢀ
Press the
ENTER
button.
BW : The IR Filter is OFF and the screen is black and
...
HOME RETURN
white. (Sensitivity to low light is increased to a level
comparable to a black and white camera.)
COLOR
QUIT
EXIT
QUIT
AUTO : Select to automatically switch between the COLOR
mode and BW mode depending on the amount of light.
ꢀ
You can store up to 128 ZOOM and FOCUS positions with the
PRESET. You can use the PRESET function when you connect
the SSC-1000 to the RS-485.
25
26
In low light conditions, the IR Filter is turned OFF and the
sensitivity to low light is increased by switching to the BW
mode, but in bright light conditions, the IR Filter is turned
ON and the sensitivity is decreased by switching to the
COLOR mode. If you select AUTO and press the ENTER
button, a screen from which you can set the ALARM
ON/OFF, BURST ON / OFF, BW LEVEL and DWELL TIME
will appear.
EXIT
The EXIT option is used to quit the Setup Menu mode and
return to the Normal Operation mode.
QUIT : Select to ignore any changes you have made and
restore the previously saved settings.
ꢀ
SAVE : Select to save the settings that have been
changed so far.
ꢀ
-
-
ALARM ON : It sends out signals through the ALARM output
port in the BW mode.
ALARM OFF : The ALARM output port is synchronized with
the MOTION DET finction regardiess of the COLOR/BW
mode.
PRESET : Select to ignore any changes you have made
and restore the factory default settings.
ꢀ
E
-
-
-
BURST ON : The color burst signal is output together with
black and white composite video signal.
BURST OFF : The color burst signal is not output.
LEVEL : You can set the brightness level that changes from
COLOR mode to BW mode in 3 steps : LOW, MEDIUM, and
HIGH.
DWELL TIME : Set the HOLDING time for switching between
COLOR and BW mode depending the changes in the amount
of light. You can set the HOLDING time to 10sec (S), 30sec,
60sec, or 300sec( L).
In AUTO mode, AGC will operates in high speed mode, and
you cannot change it manually, as it is indicated by "---".
(SET UP)
(BW SETUP)
CAMERA ID
IRIS
SHUTTER
AGC
OFF
ALC...
OFF
---
WHITE BAL
SPECIAL
AUTO FOCUS
MOTION DET
PRESET
COLOR/BW
EXIT
ATW
...
ONEAF
OFF
...
Press the
ENTER
button.
ALARM
BURST
LEVEL
DWELL TIME
RET
OFF
ON
MEDIUM
S--|----L
AUTO...
QUIT
Caution : If you use an infrared light source while in AUTO
mode, AUTO switching malfunction and camera
AF malfunction may occur.
27
28
Specifications
5
SCC-C4201/C4203
SCC-C4201P/C4203P
Item
Product Type
Description
- 22x Zoom Camera
Remark
Item
Description
- 22x Zoom Camera
- DC 12V 10%
Remark
Product Type
Power Supply Voltage
Power Consumption
Broadcast System
Imaging Device
Power Supply Voltage
Power Consumption
Broadcast System
Imaging Device
Effective Pixe
- DC 12V 10%
- 5.0 W
- 5.0 W
- NTSC Standard Color System
- 1/4 inch IT CCD
- 768(H) x 494 (V)
- 525 Line, 2:1 Interlace
- PAL Standard Color System
- 1/4 inch IT CCD
E
Effective Pixe
- 752 (H) X 582 (V)
- 625 Line, 2:1 Interlace
Scanning Method
Scanning Method
- Horizontal : 15,734 Hz (INT)
- Vertical : 59.94 Hz (INT)
- Horizontal : 15,625 Hz(INT)
- Vertical : 50 Hz(INT)
Line Frequency
Line Frequency
Synchronization Method
Resolution
- INT Only
Synchronization Method
Resolution
- INT Only
- 480 TV Lines
- 52dB(AGC OFF)
- 480 TV Lines
- 52dB(AGC OFF)
S/N Ratio
S/N Ratio
- 0.3Lux(SENS UP X4)
(0.01Lux)
- B/W(SCC-C4203):0.4Lux
(0.003Lux)
- 0.3Lux(SENS UP X4)
(0.01Lux)
- B/W(SCC-C4203P):0.4Lux
(0.003Lux)
Minimum Scene Illumination
Minimum Scene Illumination
- ATW/ AWC/ Manual Mode
(3200°K, 5600°K, R/B Gain Control)
- ATW/ AWC/ Manual Mode
(3200°K, 5600°K, R/B Gain Control)
White Balance
Signal Output
White Balance
Signal Output
- Composite Video Out : 1.0 Vp-p
75ohms/BNC
- Composite Video Out : 1.0 Vp-p
75ohms/BNC
- 22x Zoom Lens in a single unit
- Focal length : 3.6 to 79.2 mm
- Aperture : F1.6(Wide), F3.8(Tele)
- IR Filter On/Off (SCC-C4203 Only)
- 22x Zoom Lens in a single unit
- Focal length : 3.6 to 79.2 mm
- Aperture : F1.6(Wide), F3.8(Tele)
- IR Filter On/Off (SCC-C4203P Only)
Lens
Lens
- Off, 1/100, 1/250, 1/500, 1/1K, 1/2K,
1/4K, /10K sec
- Off, 1/120, 1/250, 1/500, 1/1K, 1/2K,
1/4K, /10K sec
Electronic Shutter
Electronic Shutter
Back Light Compensation
Sense Up
- Off / On (Area Setting)
Back Light Compensation
Sense Up
- Off / On (Area Setting)
- Off/Auto 2x~128x/Fix 2x~128x
- Off / On (x10), PIP
- Off/Auto 2x~128x/Fix 2x~128x
- Off / On (x10), PIP
Digital Zoom
Digital Zoom
Motion Detection
- Off / On (Area / Sensitivity Setting)
Motion Detection
- Off / On (Area / Sensitivity Setting)
Operating Temperature
and Humidity
Operating Temperature
and Humidity
- 14°F ~ +122°F, ~90 %
- 14°F ~122°F, ~90 %
Dimensions
Weight
- 59.5 x 60.5 x 109.5mm
- 375g
Dimensions
Weight
- 59.5 x 60.5 x 109.5mm
- 375g
29
30
Specifications
SCC-C4301/C4303
SCC-C4301P/C4303P
Item
Product Type
Description
- 22x Zoom Camera
Remark
Item
Description
- 22x Zoom Camera
Remark
Product Type
Power Supply Voltage
Power Consumption
Broadcast System
Imaging Device
Power Supply Voltage
Power Consumption
Broadcast System
Imaging Device
Effective Pixe
- AC 24V (60Hz) or DC 12V 10%
- 5.5W
- AC 24V (50Hz) or DC 12V 10%
- 5.5W
- NTSC Standard Color System
- 1/4 inch IT CCD
- PAL Standard Color System
- 1/4 inch IT CCD
E
- 768(H) X 494(V)
Effective Pixe
- 752(H) X 582(V)
Scanning Method
- 525 Line, 2:1 Interlace
Scanning Method
- 625 Line, 2:1 Interlace
-
Horizontal : 15,734 Hz(INT), 15,750 Hz(L/L)
-
Horizontal : 15,625 Hz(INT), 15,625 Hz(L/L)
Line Frequency
Line Frequency
- Vertical : 59.94 Hz(INT), 60 Hz(L/L)
- Vertical : 50 Hz(INT), 50 Hz(L/L)
Synchronization Method
Resolution
- INT / Line Lock
Synchronization Method
Resolution
- INT / Line Lock
- 480 TV Lines
- 480 TV Lines
S/N Ratio
- 52dB(AGC OFF)
S/N Ratio
- 52dB(AGC OFF)
- 0.3Lux(SENS UP X4)
(0.01Lux)
- B/W(SCC-C4303):0.4Lux
(0.003Lux)
- 0.3Lux(SENS UP X4)
(0.01Lux)
- B/W(SCC-C4303P):0.4Lux
(0.003Lux)
Minimum Scene Illumination
Minimum Scene Illumination
- ATW/ AWC/ Manual Mode
(3200°K, 5600°K, R/B Gain Control)
- ATW/ AWC/ Manual Mode
(3200°K, 5600°K, R/B Gain Control)
White Balance
Signal Output
White Balance
Signal Output
- Composite Video Out : 1.0 Vp-p
75ohms/BNC
- Composite Video Out : 1.0 Vp-p
75ohms/BNC
- 22x Zoom Lens in a single unit
- Focal length : 3.6 to 79.2 mm
- Aperture : F1.6(Wide), F3.8(Tele)
- IR Filter On / Off (SCC-C4303 Only)
- 22x Zoom Lens in a single unit
- Focal length : 3.6 to 79.2 mm
- Aperture : F1.6(Wide),F3.8(Tele)
- IR Filter On/ Off (SCC-C4303P Only)
Lens
Lens
- Off, 1/100, 1/250, 1/500, 1/1K, 1/2K,
1/4K, /10K sec
- Off, 1/120, 1/250, 1/500, 1/1K, 1/2K,
1/4K, /10K sec
Electronic Shutter
Electronic Shutter
Back Light Compensation
Sense Up
- Off / On (Area Setting)
Back Light Compensation
Sense Up
- Off / On (Area Setting)
- Off/Auto 2x~128x/Fix 2x~128x
- Off / On (x10), PIP
- Off/Auto 2x~128x/Fix 2x~128x
- Off / On (x10), PIP
Digital Zoom
Digital Zoom
Motion Detection
- Off / On (Area / Sensitivity Setting)
Motion Detection
- Off / On (Area / Sensitivity Setting)
Operating Temperature
and Humidity
Operating Temperature
and Humidity
- 14°F ~122°F, ~90 %
- 14°F ~122°F, ~90 %
Dimensions
Weight
- 59.5 x 60.5 x 143mm
- 500g
Dimensions
Weight
- 59.5 x 60.5 x 143mm
- 500g
31
32
Others
6
1 : With the menu "off", if voltage is applied for shorter than 2
seconds, the AF function will be activated, and if voltage is
applied for longer than 2 seconds, the menu will be "on".
With the menu "on", if voltage is applied, the ENTER
function will be activated.
ZOOM/FOCUS Remote Terminals
These terminals are to activate the ZOOM/FOCUS,
MENU CONTROL, HOME RETURN, and AF functions
by using an external controller. They could be set to one
of four modes depending on the input condition: A, B, C,
and D. (SPECIAL - CTRL TYPE)
2 : If voltage is applied for longer than 2 seconds, the
camera will return to the specified home position
(PRESET 0).
(Operating Voltage Range : +3V~+13V, -3V~-13V)
E
1) If voltage is applied to either the ZOOM or FOCUS
terminal, but not both
HOME RETURN
Function*1 TELE (Up) WIDE (Down) NEAR (Left) FAR (Right)
If no keys are pressed for a period of time, the camera will
automatically return to the specified home position.
The home position is set to PRESET 0. If the position of
PRESET 0 has not been saved, the HOME RETURN
function will not work.
Code
ZOOM Terminal
FOCUS Terminal
A
-6V
+6V
+6V
-6V
-6V
-6V
+6V
-6V
+6V
-6V
+6V
-6V
B
C
D
-6V
+6V
+6V
+6V
Setting the Home Return Time
1: In MENU OFF, these are used to control the
ZOOM/FOCUS function, and in MENU ON, these
are used as the UP, DOWN, LEFT, and RIGHT
keys
OFF © 1 MIN © 2 MIN © 3 MIN~60 MIN © 2HOUR ©
©
3HOUR ~12HOUR
2) If voltage is applied to the ZOOM and FOCUS
terminals at the same time
ENTER/AF*1
HOME RETURN*2
Function
Code
ZOOM Terminal FOCUS Terminal ZOOM Terminal FOCUS Terminal
A
B
C
D
-6V
-6V
-6V
+6V
-6V
+6V
+6V
-6V
-6V
+6V
-6V
+6V
-6V
+6V
+6V
+6V
33
34
Memo
Memo
|