VOD86
8.5” OVERHEAD LCD
MONITOR WITH
DVD PLAYER
OPERATION
MANUAL
128-8342
FEATURES
Congratulations on your purchase of the Audiovox VOD86
DVD Player with Drop-Down Video / Monitor. The VOD86
has been designed to give you and your family many years of
video entertainment in the mobile environment. Please read
the directions that follow to familiarize yourself with the
product to ensure that you obtain the best results from your
equipment.
•
8.5” TFT (Thin Film Transistor) Active Matrix LCD
(Liquid Crystal Display) Monitor
Built-in DVD Player
•
•
OSD (On Screen Display) for Control of Picture
Quality and Functions
•
Single Channel Infrared Transmitter for IR Wireless
Headphones
Please note: Installation options vary, see the individual
,
owner s manuals for each component in your system to
•
•
•
•
•
•
•
•
Two Audio / Video Source Inputs (DVD, AV1/AUX)
Dome Lights with Built-in Three Way Switch
Built-in 16 Channels Frequency Wireless FM Modulator
Last Position Memory for DVD
obtain a full understanding ofeach component’soperation.
Safety Precaution
For safety reasons, when changing video media it is
recommended that the vehicle is not in motion, and that you
do not allow children to unfasten seat-belts to change video
media or make any adjustments to the system. System
adjustments can be accomplished using the remote control,
while seat-belts remain fastened. Enjoy your Audiovox
entertainment system but remember the safety of all
passengers remains the number one priority.
Screen Mode Selection (16:9, 4:3)
Full Function Remote Control
Backlit Controls
1 AV Output Via RCA Pigtail
3
1. POWER( )Button
Used toturn the systemon/off.
CONTROLS AND INDICATORS DIAGRAM
(FRONT VIEW)
2. Source Select
Use to select one of the four sources: DVD, AV1/AUX.
1
3. PLAY (u) Button
This button is used to start playback of a disc.
4. STOP (n) Button
This button is used to stop playback.
2
3
4
5
6
5. EJECT (?) Button
This Button is used for ejecting discs from the disc
Compartment when the source is DVD and the unit is
powered up.
7
8
6. Three Position Dome Light Switch
ON
OFF
- Turns on the dome lights.
- The dome lights will not turn on in this position.
AUTO - Automatically switches on the dome lights in
conjunction with the vehicle's interior illumination.
9
7. Dome Lights
Provide additional interior illumination.
8. VentilationOpenings
9. LCD CutOffSwitch
Used toturn offthe LCD panel monitor when in the closed
position.
10
11
10. LCD Panel
11. Screen Release
Press torelease the screen.
4
REMOTE CONTROL OPERATION
CONTROL FUNCTION DESCRIPTION
(SIDE VIEW & BACK VIEW)
Side View
1
1. DVD Disc insertionSlot
For loading and removing discs. Unit must be in a powered on
state to load disc when disc is inserted. Insert disc with label side
facing up.
Back View
Battery Installation
Before attempting to operate your Remote Control, install the
batteries as described below.
1) Turn the Remote Control face down. Using your finger, slide
the battery cover off in the direction of the arrow.
2) Install Two "AAA" batteries. Make sure that proper polarity
(+ or -) is observed.
1 2 3
1. Auxiliary Video Input
3) Align the cover tabs with the remote control and slide the
cover until it locks.
2. Auxiliary Audio Left Input
3. Auxiliary Audio Right Input
The remote control will operate the VOD86. It is not a universal
remote control and will not control equipment from other
Manufacturers.
5
MAIN FUNCTION DESCRIPTION
* Function control is available on the unit and the remote control.
** Function not available in this model.
***Function is only available in DVD source but not available in
AV1/AUX source.
POWER
MONITOR SELECT
EJECT
1
M1
M2
35
34
2
3
4
TV
DVD
1. POWER Button*
Press this button to turn the unit ON and OFF.
SOURCE
1
4
7
0
2
5
8
3
6
9
5
6
7
8
AUTO
MEMORY
2. MONITOR SELECT
SKIP/
SEARCH
M1 Button - Sets the remote control code to allow control of
the unit set to M1 mode only.
M2 Button** - Invalid function for this model
ERASE/
WRITE
VOLUME
FMM
ON/OFF SELECT
CHANNEL DAY/
NIGHT
33
PIX
9
10
32
31
30
IRT
RETURN DISPLAY ON/OFF
MUTE
3. TV Mode Select Button**
Switches certain function keys on the remote control for TV
functions.
11
12
29
13
OK
14
15
4. DVD Mode Select Button
Switches certain function keys on the remote control for DVD
functions.
28
MENU
SETUP
16
17
REPEAT
AUDIO
27
26
25
24
ZOOM
A-B
5. SOURCE Button*
Each time the button is pressed, the audio/video source will
change in the followingsequence: DVD > AV1/AUX.
18
SUBTITLE
19
20
21
6. AUTO MEMORY Button (AUTO PROGRAM Button)**
When the AUTO MEMORY button is pressed, all channels are
searched and channels that are detected with signals of
sufficient levels are automatically stored in memory.
22
23
6
7. SKIP / SEARCH Button**
This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on channels that are programmed
into memory when the CHANNEL UP / DOWN buttons are used. When the SKIP mode is disable, the TV will stop on all active channels.
8. ERASE / WRITE Button**
While tuned to a channel, pressing this button will alternately store or erase the channel from memory.
9. FMM ON / OFF Button
Turns the wireless FM Modulator on or off.
10. CHANNEL SELECT Button
Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6
89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14
90.7MHz, Ch15 90.9MHz, CH16 91.1MHz)
11. RETURN Button
Press Return Once :Gotodisc menu.
Press ReturnTwice :Gotomovies playback.
12. DISPLAY
Press todisplay current disc information while the disc is playing. Press cursor (p
q
)buttons toselect theTitle or Chapter.
ForTitle/Chapter selection use the numeric buttons toenter the desiredTitle Chapter selection.
13. CURSOR / CHANNEL UP DOWN (pqt
u
)
Use these buttons tonavigate the menu selections on the screen.
Use the CHp
toincrease the channel number and use CHq
todecrease the channel number. **
14. OK Button (ENTER)
Used toimplement a selected setting or menu option.
7
15. MENU Button
Allows the user toaccess the DVD menu(DVD MODE).
16. REPEAT Button
Allows the user torepeat a selected title, chapter, or track.
17. AUDIO Button
Press to display and select the available AUDIO languages in DVD mode. Each time you press the button, the language changes.
Note: The languages for audio vary from disc to disc.
18. SUBTITLE Button
Press to display and select the available subtitle language in DVD mode. Each time you press the button, the subtitle language
changes.
Note: The type and number of languages for subtitle vary from disc to disc.
19. STOP (<) Button*
Press to stop playback.
20. PREVIOUS (9) Button
Press to return to the previous chapter or track.
21. SCAN BACKWARD (7) Button
Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, and 16 times the normal speed.
22. PAUSE (II) Button
Allows the user to pause the playback. Pressing pause again or pressing the Play Button will resume normal playback.
23. PLAY Button*
Press to activate the play mode when a disc is loaded in the disc compartment.
8
24. SCAN FORWARD (8) Button
Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, and 16 times the normal speed.
25. NEXT (:) Button
Press to skip to the next chapter or track.
26. A-B Button
Allow user to repeat the playback from point A to point B.
Press A-B button On-Screen Display
DVD player
Once
Twice
3 times
Repeat A-
Repeat AB
AB Off
Mark the beginning of the section to repeat (Set point A)
Mark the end of the section to repeat (Set point B)
Cancel the A-B repeat function
27. ZOOM Button
Press this button to enlarge the picture when playing a DVD disc.
Press ZOOM button
Once
Twice
DVD player perform
Enlarge the picture 1 times of the original size
Enlarge the picture 2 times of the original size
Enlarge the picture 3 times of the original size
Picture is returned to original size
3 times
4 times
28. SETUP Button
Press to display the Setup Menu which allows the user to change the DVD player options such as TV DISPLAY, OSD
LANGUAGE, PARENTAL CONTROL etc. Refer to the settings and Adjustments section for more information.
29. IRT ON/OFF Button
Turns the Infrared Transmitter IRT ON or OFF for IR Wireless Headphones. Pressing M1 then IRT ON/OFF will control the IR
Transmitter for M1.
9
30. MUTE Button***
Press this button to mute all the audio.
Pressing the button again restores the sound to the previously set level.
31. DAY / NIGHT Mode Button**
This control toggles the unit between "Day" and "Night" LCD illumination modes. In the "Day" mode, the LCD backlit intensity is at
Maximum. In "Night" mode, the LCD backlit is dimmed to a preset level that is more suitable for low light operation.
32. PIX Button (Picture Select)
Each time this button is pressed, the on screen picture adjustment displays the "adjustment bar" for BRIGHTNESS, CONTRAST,
COLOR, TINT or RESET. Once the desired adjustment bar is displayed, use the VOLUME(+)/ VOLUME(-) button to adjust the setting.
The display will automatically turn off if no adjustments are made within 6 seconds, or is any other button is pressed.
33. VOLUME DOWN (-) or UP (+)
Press to decrease or increase the level of the picture adjustments.
34. NUMBER Buttons
Allow the user to enter numbers 0 to 9 for selection of selection of CD tracks, DVD chapters and password.
35. EJECT (?) Button*
This button is used to eject the disc.
10
SETTINGS AND ADJUSTMENTS
PICTURE ADJUSTMENTS
When watching a program, the picture quality can be adjusted to suit your taste.
PIX (P) Button
1) Each time this button is pressed, the on screen picture adjustment displays the "adjustment bar" for BRIGHTNESS, CONTRAST,
COLOR, TINT or RESET.
2) Once the desired adjustment bar is displayed, use the VOLUME(+)/ VOLUME(-) button to adjust the setting.
The display will automatically turn off if no adjustments are made within 6 seconds, or is any other button is pressed.
16
BRIGHTNESS
3) Press the PIX button five times to select RESET, then press either Volume (-) or the Volume (+) button on the remote or the main unit
and all of the picture settings (BRIGHTNESS, CONTRAST, COLOR and TINT) will return to the factory setting.
11
SETTINGS AND ADJUSTMENTS
The Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen
display, limit playback forchildren.
Using the Setup Menu
1. Press the SETUPbutton on the remote.The Setup Menu appears on the screen as shown per diagram.
Language Setup
Video Setup
Rating Setup
Misc Setup
Language
Video
: English
: Off
OSD Language
Subtitle
Language
Video
: English
Rating
Audio
Rating
Misc
Misc
2. Inorder toGotothe desired page, move the highlight using the cursor buttont
3. Afterentering the desired page, highlight the desired item using the cursor buttonporq
4. Press utomove the highlight tothe different options forthe selected item. Pressporqtoselect the desired options, and then press
orutothe icon indicated.
.
ENTER toconfirm the selection.
5. Repeat steps 3~4 tocontinue setting the items in the same Setup Page.
6. To change toanother Setup page, press tuntil the highlight moves back tothe icon on the top part ofthe Setup Menu.Then, repeat steps
2~5.
ExitingtheSetupMenu
Press the SETUPbutton again only.
12
LANGUAGE SETUP
OSD Language
Subtitle
Language
English
French
Spanish
German
Italian
Video
Language for On-Screen Display
OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display.
The user can either select English, French, Spanish, German or Italian for the OSD language.
Rating
Audio
Misc
SUBTITLE SETUP
OSD Language
Subtitle
Language
English
French
Video
Spanish
German
Italian
select "SUBTITLE" using p
q
button, then press u
button to enter the Sudmenu. Select the subtitle you
Rating
Audio
desire using pqbutton, then press "OK" to confirm the setting. Press t
button to return.
Japanese
Misc
Chinese
Note: The subtitle selection is only available for discs that are recorded in the above listed languages. If the selected,
language is not available, the player will play and display on the screen the original language contained in the disc.
Thai
Off
AUDIO SETUP
OSD Language
Subtitle
Language
English
French
Video
select "AUDIO" using p
q
button, then press u
button to enter the Sudmenu. Select the audio you desire
Spanish
German
Italian
Rating
Audio
using pqbutton, then press "OK" to confirm the setting. Press t
button to return.
Misc
Japanese
Chinese
Thai
Note: The audio selection is only available for discs that are recorded in the above listed languages. If the selected,
language is not available, the player will play and display on the screen the original language contained in the disc.
VIDEO SETUP
TV Display
TV display
TV type
4:3
Language
16:9
The TV DISPLAY setup allows you to adjust screen setting (aspect ratio).
4:3 This displays the wide picture with black bands on the upper and lower portions of the screen.
16:9 This displays a wide picture with black bands on the upper and lower portion of the screen.
The bandwidth will vary, depending on the aspect ratio of the disc.
Video
Rating
Misc
13
TV Type
The TV TYPE setup allows you to select the system to fit to the color system of the TV to be connected.
NTSC - Select this type for NTSC TV
PAL - Select this type for PAL TV
Multi - Select this type for multi-system TV
RATING SETUP
Rating
This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control.
G
Language
Parental
: 6.Adult
Change Password
PG
PG - 13
R
Video
Rating
NC - 17
Adult
Misc
The rating level can only be changed when the displayed lock is open. For first time use to change parental
Parental
: 6.Adult
Password
Language
control, using cursor ubutton to enter parental mode, key in the default password (3308) and press OK.
Video
Enter Password
Press OK again to select the parental level, select the level and press OK. To change the password to your
own password press "Change Password" mode and enter the default password (3308) and press OK. Press
OKand again and key in a new four digit password.Aftercomplete press OKtoend the process.
Rating
Misc
Note: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it. To avoid the possibility
of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from
this manual. Some discs can be limited depending on the age ofusers while some discs cannot.
Misc SETUP
select "MISC" using p
Language
Load Factory
qbutton, then press u
button to enter the Misc menu. Select the subtitle you desire
: On
: On
Screen Saver
Default Source DVD
Video
using pqbutton, then press "OK"toconfirm the setting. Press t
button toreturn.
Rating
Misc
14
LoadFactory
The Load Factory-Reset allows you toreset all options tofactorysettings.
*Thisfunction will notaffectthe Rating control settings.
Load Factory
Language
Do you want to use default setting?
Video
Yes
Default Source DVD
No
: On
Rating
Misc
Screen Saver
ON - Screen saver will appear
OFF - Screen saver will not appear
Load Factory
Language
Off
Screen Saver
Video
On
Default Source D
Rating
Misc
Note: The DVD player will enable the Screen Saver mode if the unit is inactive for approximately 2 minutes.
Default Source DVD
This allows the user to select from:
ON - When ever the unit is turned on it will return to DVD mode.
OFF - When ever the unit is turned on it will return to the last source selected.
Load Factory
Language
: On
Off
On
Screen Saver
Video
Default Source DVD
Rating
Misc
PlayingDVDs
1. PresstheDISPLAYbuttonontheremotecontroltodisplaythestatusbanner. Displaybannerincludetitle, chapter, angle, audio, subtitle, title
selection &chapterselection.
2. TitleSelection
Pressnumeric(0~9)buttonstodochangedoftitle selection.ThenpressOKtoimplementtheselection.
3. Chapterselection
Pressnumeric(0~9)buttonstodochangedofchapterselection.ThenpressOKtoimplementtheselection.
As you toggle through the options, the repeat option changes at that time. The track, for example, repeats once that track has ended. The
selectedrepeatoptionloopsrepeatedlyuntil youturnitoff.
15
PlayingMP3 Discs
MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while
taking up much less space. CD-R discs that have been encoded in MP3 format can be played on your DVD player. The DVD player plays the
songs in the order they were burned on tothe disc.
When playback is started the elapsed time ofthe trackthatis playing will be displayed.
Press the display button toturn the display off.
00:00:01
SelectingFolders andSongs
/TRACK 02.MP3
03/13
TRACK 01
TRACK 02
WhenanMP3 isloadedinthe player, the navigationmenuappearsautomatically.
1. Pressporqtomovethe highlighttothe desired folderonthe leftsideofthe menuand pressOK.
The songsinthe folderwillbedisplayed onthe rightsideofthe menu.
2. Pressporqtomovethe highlighttothe desired song andpressOKtobegin playbackofthe highlighted song.
Repeat
Mode
: All
: Shuffle
Edit Mode
TRACK 03
TRACK 04
TRACK 05
TRACK 06
Music Playing
Album: genre Comment:-
:1
Skipping Songs
Use the Next (:) button on the remote control to move to the next song. Use the Previous (9) button to move to the previous song.
Selecting a Play Mode
Filter (For MP3 & JPEG only)
Filter Mode is a function to enable or disable the data format during the play disc has a difference data burn in one disc.
00:00:01
Filter function with below 3 condition:
1/12
/
Filter
Audio
Photo
Video
Audio - Audio data format (MP3, WMA)
Photo - Photo data format (JPEG)
Video - Video data format (MPEG , )
TRACK 01
TRACK 02
Flat Mode
Repeat : of
TRACK 03
TRACK 04
TRACK 05
TRACK 06
Music Playing
16
FlatMode:playthe entiredisc
1/12
/
Flat Mode
TRACK 01
TRACK 02
This Mode function always default On. During the Flat Mode is On, all the data folders with MP3, JPEG & movies picture
will be play by sequencing. If Flat Mode function default to off, it just can play the selected folder only, other folders are
disabled.
Repeat : Off
Mode
:
Normal
TRACK 03
TRACK 04
TRACK 05
TRACK 06
Music Playing
Repeat: playrepetitively
1/12
/
Flat Mode
TRACK 01
TRACK 02
Repeat function has 4 options : Off, Single, Folder, All. Move cursor to Repeat function and press OK,
Off/Single/Folder/All switch orderly. Repeat function’sdefautl statusis Off;
Repeat : Off
Mode
:
Normal
TRACK 03
TRACK 04
TRACK 05
TRACK 06
Music Playing
Off Turn off repeat function
Single Repeat the song being played until STOP is pressed.
Folder Play all songs in a folder repetitively
Play all songs on the disc repetitively
All
Mode: play mode
Mode function have 4 options: Normal, Shuffle, Random, Music Intro Move cursor to Mode function, press OK; Normal/Shuffle/Random/
Music Intro switch orderly. The Mode function’s default status is Normal.
Normal: Play all songs in folder once
Shuffle: Play songs in a folder in a random mode. Each song in a folder only can be played once.
,
Random: Play songs in a folder in a random mode. Each song in a folder is t only be played once.
Music Intro: Play all songs in a folder 10sec
Remark: Music Intro function, play a song 10 sec, users can realize the musical contents of the disc primarily and select the fond song
expediently;
17
Edit Mode
Program View
Add to Program
1/12
/
TRACK 01
TRACK 02
Edit Mode
Program View
Add to Program
TRACK 03
TRACK 04
TRACK 05
TRACK 06
Notice: Edit Mode/Program view/Add to program function must be used associatively and they can’t be
used at play status. No other than Edit Mode function is On, Program view function and Add to program
function can be used.
Music Playing
Album: ------------
Method: Make sure not play back disc, Move cursor to Edit Mode function, press OK, switch it’s On/Off. After select Edit Mode, open the
folder, select the songs which will be compiled, the selected song’s left will appear a selected symbol, move cursor to Add to program
function, press OK, the selected song is added to a new program, move cursor to Program view function, press OK, browse the songs in
the programs.
At Edit Mode mode, if Add to program function is used, move cursor to program view function press OK, the interface switch as follow:
Edit Mode
Browser View
1/12
/
TRACK 01
TRACK 02
Edit Mode
Browser View
Clear Program
Clear Program
TRACK 03
TRACK 04
TRACK 05
TRACK 06
Method: When Add to program function switch to Browser View function, will display the songs in the new
program, select a song, the selected song’s left will appear a selected symbol, move cursor to Clear program
function. Press OK, delete the selected song.
Music Playing
Artist:
18
DVD Basics
To get the optimum use out ofthe DVD section, make sure you read this section completely.
RegionalCoding
Both the DVD player and DVDs are coded by region. These regional codes must match in order for the disc to play. If the codes don t match, the
,
,
,
disc won tplay.This unit scode is region 1. Otherregional codes cannot be played in this unit.The unit will display "WRONGREGION".
Types ofDiscs yourDVD willplay
• DVD* disc -DVD discs which contain video.
• Audio discs - Audio CDs contain musical or sound content only.
• MP3 discs - A disc that contains audio files (for example, a CD-R with downloaded MP3 files).
* This system is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and software,
playback cannot be guaranteed.
Loading and Playing Discs
Before you load a disc, make sure that it is compatible with the player. Insert the disc with the label facing the driver.
Note: the following Discs CANNOT be used with this player :
• MiniDisc
• Laserdisc
• CD-1, CD-ROM, DVD-ROM, Super Audio CD (SACD), DVD Audio, JPEG (KODAK)
To load and Play a Disc
Press the Power button to turn the unit ON. Select DVD mode and insert the disc (Label towards driver) into the disc compartment.
19
TURNING THE UNIT ON OR OFF
1. Pushing in the Screen Release button will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a
Comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use.
2. Pressing the power button* on the unit or the remote control will turn the system on and off. When in use the internal backlighting will
illuminate the controls.
3. After the unit has been turned on and is displaying a picture, adjust the viewing angle, by pivoting the screen to optimize the picture
quality.
4. Remember to turn the unit off and pivot the LCD to the locked position when not in use.
Power
Remote Sensor
Infrared Transmitter
ON/OFF
Button
Screen Release
OVERHEAD DOMELIGHTS
The Dome Lights integrated into the VOD86 are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights
,
ON. The OFF position will prevent the lights from turning ON with the vehicle s interior lighting, and the auto position will allow the lights to turn
,
ON and OFF with the vehicle s interior lighting. Refer to the Installation Guide for wire connections. Do not leave the vehicle unattended with the
dome light switch in the ONposition, as this could result in a discharged battery.
REMOTESENSOR
The VOD86 infrared remote sensors torelay signals tothe unit when the remote control is pointed atthe remote sensor.
20
ACCESSORIES
WIRELESSHEADPHONES
The VOD86 includes a built-in infrared transmitter for use with the supplied wireless headphones. The headphone volume is adjusted using the
controls on each headset.Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as
infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your wireless headphones.
SOURCE FEATURE*
AV1
The AV1 input may be connected to a Video Cassette Player (VCP), video game system, or other audio / video devices. To access the AV1
inputs, turn the VOD86 on and press the S (source) button on the VOD86 or the Source button on the remote control until "AV1" is displayed on
the screen. Turn the video source component on with its power button or remote control. The VOD86 is now ready to play the audio and video
signals fromthe source connected toAV1 input (optional accessory cable part number 8010730 required).
AUX
The VOD86 will accept an audio / video input through the 3 RCA jacks located on the rear of the unit. The audio / video device could be a
video game system, video camera, or other input device.
AVOut
The VOD86 provides an AV output for optional video monitor(s). This output will provide the AV signals that duplicate the picture/audio being
processed by the VOD86 toan additional monitor or video display. Please see your installer formore information.
21
TROUBLESHOOTING
PROBLEM
SOLUTION
?Verify that the batteries in the remote are fresh.
?Verify that the remote sensor eye is not obstructed.
IR remote inoperative
?If monitor is set to M1, press M1 button on remote; If monitor is set to M2, press
M2 on remote.
Disc won't play
?Insert a disc with the label side facing up.
?Check the type of disc you put into disc tray. This DVD only plays DVDs, audio CDs
and MP3s.
?Both the unit and the disc are coded by region. If the regional codes don't match,
the disc can't be played. This DVD player is set to Region Number 1.
Play starts, but then stops immediately
No sound or distorted sound
?The disc is dirty. Clean it.
?Condensation has formed. Allow player to dry out.
?Make sure your DVD is connected properly. Make sure all cables are securely
inserted into the appropriate jacks.
?If you are using the 2-channel IR headphones, make sure you turn on the IR
headphone power, make sure the correct channel (A-B) is selected.
?Make sure the Modulator is ON and the proper Frequency has been selected on
the DVD player and car radio.
?Make sure that unit is set to M1 when using Single Channel Headphones.
Can't advance through a movie
?
You can't advance through the opening credits and warning information that
appears at the beginning of movies because the disc is programmed to prohibit that
action.
22
PROBLEM
SOLUTION
Not allowed at the moment
?The feature or action cannot be completed at this time because:
1. The disc's software restricts it.
2. The disc's software doesn't support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You've requested a title or chapter number that is out of range.
Picture is distorted
?The disc might be damaged. Try another disc.
?It is normal for some distortion to appear during forward or reverse scan.
No forward or reverse scan
?Some discs have sections that prohibit rapid scanning or title and chapter skip.
?
If you try to skip through the warning information and credits at the beginning of a
movie, you won't be able to. This part of the movie is often programmed to prohibit
skipping through it.
23
REPLACEMENT PARTS
SPECIFICATIONS
Remote Control
136-4196
LCD Backlighting
Resolution
Edge Light Tube
2400 x 234
Pixels
336,960
Operation Temperature
Storage Temperature
Backlit life
32 ~131 F (0 ~ 55 C)
-4 ~ 158 F (-20 ~ 70 C)
10,000 Hours
Video Display System
Headphone Audio Output
Video Output
NTSC / PAL
0.03W @ 32 ohms
1.0Vp-p @ 75 ohms
12V DC
Power Source
Dimension
L x W x H
11.0" x 9.5" x 1.7"
289mm x 243mm x 44mm
Specifications subject to change without notice.
24
12 MONTH LIMITED WARRANTY
Applies to Audiovox Mobile Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or
any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of
original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for
partsand repair labor.Agame controller, ifsupplied, is similarly warranted forninety (90) days.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g.
dated bill ofsale), specification ofdefect(s), transportation prepaid, tothe Company atthe address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs
incurred for installation, removal or reinstallation of the product, or to damage to digital memory/media devices, gaming devices,
discs, speakers, accessories, or vehicle electrical systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged
through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial
number/bar code label(s). THE EXTENTOFTHE COMPANY'S LIABILITYUNDERTHIS WARRANTYIS LIMITEDTOTHE REPAIR
OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE
PRICEPAIDBYPURCHASER FORTHEPRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION
FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY
BE LIABLE FORANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS ORANY OTHER WARRANTY. No
person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the
sale ofthis product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential
damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also
have other rights which vary fromstatetostate.
Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, NewYork 11788 l 1-800-645-4994
© 2007 Audiovox Electronics Corporation
128-5495F
WWW
© 2008 Audiovox Electronics Corp., Hauppauge, NY 11788
128-8342
|