Owner’s manual / Mode d’emploi
Bedienungsanleitung / Istruzioni per l’uso
Gebruiksaanwijzing / Manual de instrucciones
Bruksanvisning / Manual de instruções
CD RECEIVER
•
RADIO CD
•
CD-RECEIVER
•
RICEVITORE PER CD
•
CD-RECEIVER
•
RADIO CD
•
CD-LÄSARE
•
RECEPTOR CD
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
CAUTIONS:
OBS!
This appliance contains a laser system and
Apparaten innehåller laserkomponenten
som avger laserstrålning överstigande
gränsen för laserklass 1.
is classified as
a
“CLASS
1
LASER
PRODUCT”. To use this model properly, read
this Owner’s Manual carefully and keep this
manual for your future reference. In case of
any trouble with this player, please contact
your nearest “AUTHORIZED service station”.
To prevent direct exposure to the laser
beam, do not try to open the enclosure.
VAROITUS
Suojakoteloa si saa avata. Laite sisältää
laserdiodin, joka lähettää näkymätöntä
silmille vaarallista lasersäteilyä.
!CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED IN THE OWNER’S
MANUAL MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
022618
542610
ADVARSEL.
Denne mærking er anbragt udvendigt på
apparatet og indikerer, at apparatet arbejder
med laserstråler af klasse 1, hvilket betyder,
at der anvendes laserstråler af svageste
klasse, og at man ikke på apparatets
yderside kan blive udsat for utilladelig
kraftig stråling.
APPARATET BØR KUN ÅBNES AF FAGFOLK
MED SÆRLIGT KENDSKAB TIL APPARATER
MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer
imod at foretage sådanne indgreb
i
apparatet, at man kan komme til at udsaætte
sig for laserstråling.
2
DB258R
Handling Compact Discs
Contents
Use only compact discs bearing the
mark.
Storage
1. PRECAUTIONS ............................................................................................................................. 3
Flip Down Panel ............................................................................................................................. 3
Handling Compact Discs ................................................................................................................ 4
•
•
•
Do not expose compact discs to direct sun-
Do not play heart-shaped, octagonal, or other
specially shaped compact dics.
light or any heat source.
Do not expose compact discs to excess hu-
midity or dust.
Do not expose compact discs to direct heat
from heaters.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
2. CONTROLS ................................................................................................................................... 5
3. NOMENCLATURE ......................................................................................................................... 6
Names of the Buttons and their Functions .................................................................................... 6
Display Items / LCD Screen ........................................................................................................... 7
Handling
•
Compared to ordinary music CDs, CD-R
and CD-RW discs are both easily affected
by high temperature and humidity and
some of CD-R and CD-RW discs may not
be played. Therefore, do not leave them
for a long time in the car.
4. DCP ................................................................................................................................................ 8
Cleaning
5. OPERATIONS
9
9
11
................................................................................................................................
............................................................................................................................
•
To remove fingermarks and dust, use a soft
Basic Operations
Radio Operations
cloth and wipe in a straight line from the
center of the compact disc to the circum-
ference.
.........................................................................................................................
RDS Operations ........................................................................................................................... 12
CD Mode Operations ................................................................................................................... 15
•
New discs may have some roughness
around the edges. If such discs are used,
the player may not work or the sound may
skip. Use a ball-point pen or the like to re-
move any roughness from the edge of the
•
•
Do not use any solvents, such as commer-
cially available cleaners, anti-static spray,
or thinner to clean compact discs.
After using special compact disc cleaner,
let the compact disc dry off well before play-
ing it.
6. IN CASE OF DIFFICULTY .......................................................................................................... 17
7. ERROR DISPLAYS ..................................................................................................................... 17
8. SPECIFICATIONS ....................................................................................................................... 18
disc.
Ball-point pen
Roughness
1. PRECAUTIONS
1. When the inside of the car is very cold and the
Flip Down Panel
player is used soon after switching on the
heater, moisture may form on the disc or the
•
•
Never stick labels on the surface of the
compact disc or mark the surface with a
pencil or pen.
Never play a compact disc with any cello-
phane tape or other glue on it or with peel-
ing off marks. If you try to play such a com-
pact disc, you may not be able to get it back
out of the CD player or it may damage the
CD player.
Do not use compact discs that have large
scratches, are misshapen, cracked, etc.
Use of such discs may cause misoperation
or damage.
To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by
the edges.
This unit uses a flip-down structure that makes
possible large-size displays.
optical parts of the player and proper playback
may not be possible. If moisture forms on the
disc, wipe it off with a soft cloth. If moisture
forms on the optical parts of the player, do not
use the player for about one hour and the con-
densation will disappear naturally to allow nor-
mal operation.
CAUTION
!
When opening and closing the FLIP DOWN
PANEL, be careful not to catch your fingers.
They could be injured.
•
•
•
2. Driving on extremely bumpy roads which cause
severe vibration may cause the sound to skip.
1. Always use this unit with the FLIP DOWN
PANEL closed.
3. This unit uses a precision mechanism.
Even in the event that trouble arises, never
open the case, disassemble the unit, or
lubricate the rotating parts.
2. Do not force operations or use this device ab-
normally when opening or closing the FLIP
DOWN PANEL.
3. Do not use the FLIP DOWN PANEL as a tray
to place objects on when it is open.
Do not use commercially available CD pro-
tection sheets or discs equipped with sta-
bilizers, etc. These may damage the disc
or cause breakdown of the internal mecha-
nism.
4. When closing the FLIP DOWN PANEL, do not
INFORMATION FOR USERS:.
press the [
] button.
OPEN
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANU-
FACTURER WILL VOID THE WARRANTY.
5. Strong impacts to the operating or display sec-
tion can cause damage or deformation.
6. If the FLIP DOWN PANEL does not open fully,
gently open it with your hand.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.
Download from WwwD.SB2o5m8Ranua3ls.com. All Ma4nualsDSBe25a8rRch And Download.
CONTROLS / LES COMMANDES / REGLER / CONTROLLI
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
3. NOMENCLATURE
2.
Note:
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).
Main unit / Appareil principal / Hauptgerät / Apparecchio principale
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
Names of the Buttons and their Functions
[
]
[
]
button
AF button
OPEN
[
]
(
• Deeply push in OPEN button to unlock the flip
• Press the button to turn on or off the AF Alter-
)
down panel.
native Frequency function.
• When the button is pressed and held, Regional
function can select ON or OFF.
[
]
P/A button
• Performs preset scan while in the radio mode.
When the button is pressed and held, auto store
is performed.
[
]
BND button
• Switches the band, or seek tuning or manual
tuning while in the radio mode.
[
]
PTY button
• Plays a first track while in the CD mode.
• Use the button to set the PTY (Programme Type)
standby mode or PTY items.
[
]
ROTARY knob
• Performs random play while in the CD mode.
• Adjust the volume by turning the knob clock-
wise or counterclockwise.
[
]
SCN button
• Use the knob to perform various settings.
• Performs scan play for 10 seconds for each
track while in the CD mode.
[
]
SRC button
• Press the button to turn on the power.
[
]
RPT button
• Plays repeatedly while in the CD mode.
Press and hold the button for 1 second or longer
to turn off the power.
With the FLIP DOWN PANEL opened / Ouvrez le PANNEAU RABATTABLE
ÖFFNUNG DER KLAPPSCHALTTAFEL / Apertura del PANNELLO APRIBILE
Met het NEERKLAPBARE PANEEL geopend / Apertura del PANEL ABATIBLE
DEN NEDFÄLLBARA PANELEN öppen / Abrindo o PAINEL RECLINÁVEL
[
]
RDM button
• Performs random play while in the CD mode.
• Switches the operation mode among the radio
and CD mode.
[
]
SS button
[
]
A-M button
[
]
[
]
• Press the SS button while keeping the BND
• Press and hold the button for 1 second or longer
to switch the MAGNA BASS EX on/off.
button pressed, to turn the screen saver func-
tion on or off.
• Use the button to switch to the audio mode
(
)
bass, treble, balance, fader
[
]
button
• Plays or pauses a CD while in the CD mode.
[ ]
Z button
• Use the button to select one of the three types
of sound characteristics already stored in
memory. (Z-Enhancer)
[
]
DISP button
[
]
• Press the DISP button while keeping the
[
]
BND button pressed, to switch the display in-
dication (Main display, clock display).
[
] [
,
]
button
• Selects a station while in the radio mode or
selects a track when listening to a CD.
[
]
DIRECT button
• Stores a station into memory or recall it directly
while in the radio mode.
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
• Press and hold the button for 1 second or longer
to switches the fast-forward/fast-backward.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapital die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
[
]
TA button
[
]
button
• Ejects a CD when it is loaded into the unit.
• Use the button to set the TA (Traffic Announce-
ment) standby mode.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
[
]
CD SLOT
• CD insertion slot.
DB258R
DB258R
5
Download from Www.Somanuals.com. All6Manuals Search And Download.
Display Items
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
DB258R
7
4. DCP
The control panel can be detached to prevent
theft. When detaching the control panel, store it
CAUTION
!
(
)
in the DCP Detachable Control Panel case to
prevent scratches.
Be sure to close the HOLD FLAP for safety
when removing the DCP.
We recommend taking the DCP with you when
leaving the car.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
Removing the DCP
[
]
1. Press the SRC button for 1 second or longer
2. Insert the left side of the DCP into the main
unit.
to switch off the power.
2.
DCP
1.
[
]
2. Press in the OPEN button.
CAUTION
!
∗ If the flip down panel does not open fully, gently
open it with your hand.
• The DCP can easily be damaged by shocks.
After removing it, be careful not to drop it or
subject it to strong shocks.
• If the FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So close
the FLIP DOWN PANEL or remove the DCP
to store into the case.
• The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, pens, screwdrivers, etc.
3. Pull the DCP toward you and remove it.
DCP
4. Close the HOLD FLAP.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
HOLD FLAP
8
DB258R
5. OPERATIONS
Note:Be sure to read this chapter referring to the front diagrams of
chapter “2. CONTROLS” on page 5 (unfold).
Basic Operations
Setting the Z-Enhancer
This unit are provided with 3 types of sound tone ef-
CAUTION
!
Be sure to lower the volume before switching
off the unit power or the ignition key. The unit
remembers its last volume setting. If you
switch the power off with the volume up, when
you switch the power back on, the sudden loud
volume may hurt your hearing and damage the
unit.
fects stored in memory. Select the one you prefer.
∗ The factory default setting is Z-EHCR OFF.
[ ]
Each time you press the Z button, the tone ef-
fect changes in the following order:
Z-ENHANCER 1 Æ Z-ENHANCER 2 Æ Z-EN-
HANCER 3 Æ Z-EHCR OFF Æ Z-ENHANCER
1...
• Z-ENHANCER 1 : bass emphasized
• Z-ENHANCER 2 : treble emphasized
• Z-ENHANCER 3 : bass and treble emphasized
Turning on/off the power
Note:
• Be careful about using this unit for a long time with-
out running the engine. If you drain the car’s bat-
tery too far, you may not be able to start the engine
and this can reduce the service life of the battery.
• Z-EHCR OFF
: no sound effect
[
]
1. Press the SRC button.
Audio mode adjustments
[
]
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
1. Press the A-M button to select the adjustment
mode. The mode switches as follows each time
[
]
the A-M button is pressed:
BASS Æ TREB Æ BAL Æ FAD Æ Previous mode
[
]
3. Press and hold the SRC button for 1 second
∗
When the Z-Enhancer function is turned on, BASS
Bass and TREB Treble cannot be selected.
(
)
(
)
or longer to turn off the power for the unit.
[
]
2. Turning the ROTARY knob to adjust the
selected audio mode.
Selecting a mode
(
)
BASS Bass : Adjustment range: -7 to +7
[
]
1. Press the SRC button to change the opera-
(
)
TREB Treble : Adjustment range: -7 to +7
tion mode.
(
)
BAL Balance : Adjustment range: L13 to R 13
[
]
2. Each time you press the SRC button, the op-
eration mode changes in the following order:
(
)
FAD Fader
: Adjustment range: F12 to R12
Radio mode Æ CD mode Æ Radio mode...
3. When the adjustment is complete, press the
Note:
[
]
A-M button several times until the function.
• If the CD mode is selected when no disc is inserted,
the display shows “NO DISC”.
Adjusting the volume
[
]
Turning the ROTARY knob clockwise increases
the volume; turning it counterclockwise decreases
the volume.
(
)
(
∗ The volume level is from 0 minimum to 33 maxi
)
mum .
DB258R
9
Basic Operations
TEL MUTE: mutes the audio sound.
Turning on/off MAGNA BASS EX
The MAGNA BASS EX does not adjust the low
sound area like the normal sound adjustment func-
tion, but emphasizes the deep bass sound area
to provide you with a dynamic sound.
TEL OFF: does not mute the audio sound.
∗ During telephone interrupt, the display shows "TEL"
∗ The factory default setting is off.
[
]
Press and hold the A-M button for 1 second or
longer to turn the MAGNA BASS EX and “M-B EX”
in the display lights on or off.
Illumination dimmer function
When the illumination line of this unit is connected
with the car-side illumination signal line, the dis-
play illumination of this unit dims in connection
with turning on the car-side illumination.
Switching display
[
]
Press and hold the BND button, and then press
[
]
the DISP button to select the desired display.
The display switches in the following order:
Turning the screen saver function on
or off
This unit is provided with the screen saver func-
tion. You can turn on or off this function.
Main Display Æ Clock ( ) Display Æ
CT
Main Display …
∗ If the display is changed by other button operation
(
)
when the clock CT is displayed, the clock display
returns automatically after the operation.
If the button operation is performed with the screen
saver function on, the operation display corre-
sponding to the button operation is shown for
about 30 seconds and the display returns to the
screen saver display.
CT (
) function
Clock Time
The CT function enables you to display clock time
only when CT data is received.
∗ The factory default setting is on.
[
]
[
]
[
]
Press and hold the BND button, and then press
Press the SS button while keeping the BND
[
]
the DISP button, the display switches to CT
button pressed, to turn the screen saver function
on or off.
(
)
.
Clock Time
∗ When no CT data is received, “CT––:––” appears
in the display.
Note:
• There are some countries and stations where clock
time data are not transmitted. In some areas, the
CT may not be displayed correctly.
Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular telephone
rings in the car.
∗ This function is not compatible with all cellular tele-
phones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
∗ The factory default setting is “TEL OFF”.
[
]
Press and hold the BND button, and then press
[
]
the
to select the “TEL MUTE” or “TEL OFF”.
DB258R
10
Radio Operations
Listening to the radio
1. Press the SRC button and select the radio
mode. The frequency or PS appears in the dis-
play.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
[
]
When you are in the step tuning mode, the fre-
quency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
∗ PS: Programme service name
2. To select a preset band, press the BND but-
[
]
ton, then select one of the preset bands such
[
]
as FM1, FM2, FM3 or AM. Every time the BND
[
]
1. Press the BND button and select the desired
button is pressed, the display will change as:
(
(
))
band FM or AM MW/LW .
F1ÆF2 ÆF3 ÆAM ÆF1...
∗ If “MANU” is not lit in the display, press and hold
[
]
[
]
3. Press the
desired station.
or
button to tune in the
[
]
the BND button for 1 second or longer. “MANU”
is lit in the display and manual tuning is now
available.
2. Tune into a station.
Tuning
•Quick tuning:
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
[
]
[
]
Press and hold the
or
button for 1
second or longer to tune in a station.
•Step tuning:
Seek tuning
[
]
[
]
Press the
or
button to manually tune
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
in a station.
DX SEEK can automatically tune in to receivable
broadcast stations; LOCAL SEEK can tune in to
only broadcast stations with a good reception sen-
sitivity.
Recalling a preset station
(
A total of 24 preset positions 6-FM1, 6-FM2, 6-
)
FM3, 6-AM exists to store individual radio sta-
[
tions in memory. Pressing the corresponding DI-
[
]
1. Press the BND button and select the desired
]
RECT button recalls the stored radio frequency
(
(
))
band FM or AM MW, LW .
automatically.
2. Tune into a station.
[
]
1. Press the BND button and select the desired
))
∗ If “MANU” is lit in the display, press and hold
(
(
band FM or AM MW/LW .
[
]
the BND button for 1 second or longer.
[
]
2. Press the corresponding DIRECT button to
∗ If “TA” is lit in the display, TP stations are auto-
matically sought.
recall the stored station.
[
]
∗ Press and hold one of the DIRECT buttons for
1 second or longer to store that station into pre-
set memory.
•DX SEEK
[
]
[
]
Press the
or
button to automatically
seek a station.
[
]
When the
button is pressed, the station is
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
sought in the direction of higher frequencies; if
button is pressed, the station is sought in
the direction of lower frequencies.
[
]
the
[
]
2. Press and hold one of the DIRECT buttons
for 1 second or longer to store the current sta-
tion into preset memory.
∗ When seek tuning starts, “DX” appears in the dis-
play.
•LOCAL SEEK
[
]
[
]
If you press and hold the
or
button for 1
second or longer, local seek tuning is carried out.
Broadcast stations with good reception sensitiv-
ity are selected.
∗ When local seeking starts, “LO” appears in the dis-
play.
DB258R
11
RDS Operations
Radio Operations
RDS (Radio Data System)
This unit has a built-in RDS decoder system that sup-
ports broadcast stations transmitting RDS data.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a previ-
ously stored station remains unoverwritten at the
memory position.
This system can display the name of the broad-
(
)
cast station being received PS and can auto-
matically switch to the broadcast station with the
(
Notes:
best reception as you move long distances AF
)
• The only FM band that can store the stations will
automatically be stored in FM3.
switching .
Also, if a traffic announcement or programme type
is broadcast from an RDS station, no matter what
mode you are in, this broadcast is received.
• When the auto store is performed, the station pre-
viously stored in the memory at that position is over-
written.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and inter-
ruption of the station being received with traffic
• If there are fewer than 6 stations with good recep-
tion, the stations previously stored at the remaining
DIRECT buttons are not overwritten.
[
]
[
]
• A station already stored in one of DIRECT but-
[
]
tons cannot be stored in another DIRECT buttons.
(
)
information from other stations TP . This func-
tion is not available in some areas.
[
]
1. Press the BND button and select the desired
))
(
(
band FM or AM MW/LW .
When using the RDS function, always set the ra-
dio to FM mode.
[
]
2. Press and hold the P/A button for 1 second
or longer. The stations with good reception are
stored automatically to the preset channels.
• AF
: Alternative Frequency
: Programme Service Name
: Programme Type
• PS
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
• PTY
• EON
• TP
: Enhanced Other Network
: Traffic Programme
∗ RDS interrupt does not function during AM radio
reception.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
AF function
The AF function switches to a different frequency
on the same network in order to maintain opti-
mum reception.
[
]
1. Press the P/A button.
2. When a desired station is tuned in, press the
[
]
P/A button again to continue receiving that
station.
Note:
∗ The factory default setting is “ON”.
• Switching OFF the AF function
[
]
• Be careful not to press and hold the P/A button
for 1 second or longer, otherwise the auto store
function is engaged and the unit starts storing sta-
tions.
[
]
Press the AF button. “AF” in the display goes off
and the AF function turns off.
• Switching ON the AF function
[
]
Press the AF button. “AF” in the display lights
and the AF function turns on.
∗ If the reception of the current broadcast station de-
teriorates, “SEARCH” appears in the display and
the radio searches for the same programme on
another frequency.
DB258R
12
RDS Operations
•Setting the TA standby mode
REG (Regional Programme) function
When the REG function is ON, the optimum re-
gional station can be received. When this func-
tion is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
[
]
If you press the TA button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into the TA standby mode until
a traffic announcement is broadcast. When a traffic
announcement broadcast starts, “TRA INFO” ap-
[
]
pears in the display. If you press the TA button
while a traffic announcement broadcast is being
received, the traffic announcement broadcast re-
ception is cancelled and the unit goes into the TA
standby mode.
∗ The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
•Cancelling the TA standby mode
•thSewAitFchfuinncgtiothneisROENG. function ON
With "TP" and "TA" lit in the display, press the
[
]
TA button. The "TA" in the display goes off and
the TA standby mode is cancelled.
[
]
Press and hold the AF button for 1 second or
longer.
[
]
∗ If “TP” is not lit, pressing the TA button searches
“REG” in the display lights and the REG function
turns on.
for a TP station.
•Searching for a TP station
• Switching the REG function OFF
[
]
When “TP” is not lit, if you press the TA button,
“TA” in the display lights and the unit automati-
cally receives a TP station.
[
]
Press and hold the AF button for 1 second or
longer.
“REG” in the display goes off and the REG func-
tion turns off.
Note:
• If a TP station is not received, the unit continues the
[
]
search operation. Pressing TA button again goes
off “TA” in the display and stops TP station search-
ing.
Manually tuning a regional station in
the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
• This function can be used when a regional broad-
cast of the same network is received.
Auto store function for TP stations
You can automatically store up to 6 TP stations
into preset memory. If the number of TP that can
be received is less than 6, broadcast stations al-
ready stored in memory are left without being
overwritten.
[
]
2. Press any one of the DIRECT buttons to call
out the regional station.
3. If the reception condition of the called out sta-
With "TA" lit in the display, press and hold the
[
]
tion is bad, press the DIRECT button of the
same number. The unit receives a local sta-
tion on the same network.
[
]
P/A button for 2 seconds or longer. The TP sta-
tions with the good reception sensitivity are stored
into present memory.
∗ Even if you select FM1 or FM2, a TP station is stored
into memory for FM3.
TA (
Traffic Announcement
)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode so you can listen to it. Traffic
PTY
This function enables you to listen to a broadcast
of the selected programme type when it starts
even if the unit is on a function mode other than
radio.
(
)
programme TP automatic tuning is also possible.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
∗ Some countries do not yet have PTY broadcast.
∗ In the TA standby mode, a TP station has priority
over a PTY broadcast station.
DB258R
13
RDS Operations
• Setting the PTY standby mode
PTY preset memory
[
]
When you press the PTY button, “PTY” lights in
the display and the PTY standby mode is turned
on. When the selected PTY broadcast starts, the
PTY item name appears in the display.
[
]
1. When you press the PTY button, the PTY se-
lect mode is turned on.
[
]
2. Turn the ROTARY knob clockwise or coun-
terclockwise to select the desired PTY.
The 29 types of PTY below can be selected.
• Cancelling the PTY standby mode
[
]
When you press and hold the PTY button for 1
second or longer, “PTY” goes off in the display
and PTY standby mode is cancelled.
PTY item
ENGLISH
NEWS
Contents
News
• Cancelling a PTY interrupt broadcast
AFFAIRS
INFO
Today’s events
Information
Sports
[
]
Press the PTY button during the PTY interrupt
broadcast, the PTY interrupt is cancelled and the
unit returns to PTY standby mode.
SPORT
EDUCATE
DRAMA
Education
Drama
Selecting PTY
CULTURE
SCIENCE
VARIED
Culture
[
]
1. When you press the PTY button, the unit goes
into PTY select mode.
Science
[
]
2. Press any one of the DIRECT buttons. Alter-
Variety
[
]
natively, turn the ROTARY knob clockwise
or counterclockwise to select the desired PTY.
POP M
Pop music
Rock music
Easy music
Light music
Classics
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
∗ Below are the factory default settings stored for
[
]
the DIRECT buttons.
PTY item
Contents
News
Preset
number
ENGLISH
NEWS
Other music
Weather
Finance
1
2
3
4
5
6
INFO
Information
Pop Music
Sport
POP M
SPORT
For children
Social
CLASSICS Serious Classical Music
EASY M Easy Listening Music
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
Religion
Phone in
Travel
3. The PTY select mode is cancelled automati-
cally 7 seconds after a PTY is selected.
Leisure
Jazz
COUNTRY
NATION M
OLDIES
Country
PTY seek
[
]
1. When you press the PTY button, the PTY se-
Nation music
Oldies
lect mode is turned on.
2. Select PTY.
FOLK M
Folk music
Documentaries
[
]
[
]
3. Press the
or
button, the unit seeks a PTY broadcast
moving up the frequencies; if you press the
button. If you press the
DOCUMENT
[
]
[
]
3. If you press and hold any one of the
DIRECT
[
]
buttons for 2 seconds or longer, the selected
button, it seeks moving down the frequen-
cies.
PTY is stored into that preset channel memory.
DB258R
14
CD Mode Operations
RDS Operations
Emergency broadcast
Loading a CD
[
]
1. Press the OPEN button to access the CD
If an emergency broadcast is received, all the func-
tion mode operations are stopped. “ALARM” ap-
pears in the display and the emergency broad-
cast can be heard.
SLOT behind the FLIP DOWN PANEL.
2. Insert a CD into the center of the CD SLOT
with the label side facing up. The CD plays
automatically after loading.
•Cancelling an emergency broadcast
Notes:
[
]
If you press the AF button, emergency broad-
• Never insert foreign objects into the CD SLOT.
cast reception is cancelled.
• If the CD is not inserted easily, there maybe an-
other CD in the mechanism or the unit may require
service.
• Discs not bearing the
cannot be played by this unit.
mark and CD-ROMs
Volume setting of TA, emergency
(
)
broadcast ALARM and PTY
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
3. Close the FLIP DOWN PANEL.
∗ The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, turn the
CAUTION
!
[
]
ROTARY knob clockwise or counterclockwise to
(
)
set the volume to the desired level 0 to 33 .
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.
Notes:
• If the FLIP DOWN PANEL does not open fully, gen-
tly open with your hand.
• After loading a CD, always close the FLIP DOWN
PANEL.
Listening to the disc already inserted
[
]
Press t e SRC button to select the CD mode,
h
the CD will start playing.
(
)
Stopping Pausing playback
[
]
While the CD playing pressing the
will stop the CD and “PAUSE” indicate.
button
[
]
Press the
back.
button again to resume play-
Ejecting a CD
[
]
1. Press the OPEN button to open the FLIP
DOWN PANEL.
[
]
2. Press the
to eject the CD. Take it out from
the ejected position.
3. Close the FLIP DOWN PANEL.
∗ If a CD is left in the ejected position for 15 seconds,
(
)
the CD is automatically reloaded Auto reload .
Notes:
• If you force a CD into before auto reloading, this
can damage the CD.
DB258R
15
CD Mode Operations
Top function
[
]
Press the BND button, then the CD will start play-
ing from the first song (track number 1).
Selecting tracks (Songs)
[
]
[
]
Press the
or
button.
:
:
Playback will start from the next track.
Playback will start from the beginning of
the track currently playing. When this but-
ton is pressed again, the CD will play from
the previous track.
Fast-forward and fast-backward
[
]
[
]
Press and hold the
or
button.
:
:
To fast-forward
To fast-backward
[
]
[
]
∗ For Audio CD mode pressing the
or
button for 1 second or longer will move forward
or backward 5 times faster than normal play, and
pressing it for 3 seconds or longer will do the op-
eration 30 times faster.
Scan play (
)
Intro Music Scan
[
]
At Audio CD press the SCN button, the “SCN” is
lit, then the CD will play the first 10 seconds of
[
]
each track of the whole disc. Press the SCN
button again to disengage the unit from scan play.
∗ A scan play will start from the track following the
one currently playing.
Repeat play
[
]
At Audio CD press the RPT button, the “RPT” is
lit, then the track currently playing will be played
[
]
repeatedly. Press the RPT button again to dis-
engage the unit from repeat play.
Random play
[
]
At Audio CD press the RDM button, the “RDM”
is lit, then the entire tracks on the disc will be
[
]
played at random. Press the RDM button again
to disengage the unit from random play.
DB258R
16
6. IN CASE OF DIFFICULTY
Problem
Cause
Solution
Power does not turn on.
No sound is produced
Fuse is blown.
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of
purchase.
(
)
Incorrect wiring.
Consult your store of purchase.
Compact disc cannot be
loaded.
Another compact disc is
already loaded.
Eject the compact disc before loading the new
one.
Sound skips or is noisy.
Compact disc is dirty.
Clean the compact disc with a soft cloth.
Compact disc is heavily
scratched or warped.
Replace with a compact disc with no scratches.
Sound is bad directly after Water droplets may form on Let dry for about 1 hour with the power on.
power is turned on.
the internal lens when the car
is parked in a humid place.
[
]
Nothing happens when
button are pressed.
Display is not accurate.
The microprocessor has
malfunctioned due to noise,
etc.
Turn off the power, then press the OPEN
button and remove the DCP.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
are dirty.
cleaning alcohol.
7. ERROR DISPLAYS
„ To protect the system, this unit has been equipped with self diagnostic functions. If a fault arises, a
warning is issued by various error displays. Follow the corrective measures and remove the fault.
Error Display
Corrective Measure
This error display indicates that a fault has arisen in the
ERROR 2
(
mechanism of the source unit for example, the disc cannot be
)
ejected .
Æ Check the source unit.
This error display indicates that the pickup focus is off because
of a scratched disc or some other factor during source unit play.
Æ Check the compact disc.
ERROR 3
ERROR 6
(
)
This indicates that the CD’s TOC table of contents cannot be
read, for example because the selected disc is upside-down.
DB258R
17
8. SPECIFICATIONS
FM tuner
Frequency Range: 87.5 MHz to 108 MHz
General
Power Supply Voltage:
(
)
14.4 V DC 10.8 V to 15.6 V allowable , nega-
tive ground
Usable Sensitivity: 11 dBf
50 dB Quieting Sensitivity: 17 dBf
Alternate Channel Selectivity: 75 dB
Current Consumption: Less than 15 A
(
)
Stereo Separation 1 kHz : 35 dB
(
)
Speaker Impedance: 4 Ω 4 Ω to 8 Ω allowable
(
)
Frequency Response 3 dB : 30 Hz to 15 kHz
(
)
Weight: 2.42 lb. 1.1 kg
Dimensions:
178 mm Width X 50 mm Height X 152 mm
Depth
AM tuner
Frequency Range:
MW 531 kHz to 1602 kHz
LW 153 kHz to 279 kHz
178 mm
50 mm
Usable Sensitivity: 25 µV
CD player
System: Compact disc audio system
Usable Discs: Compact disc
188 mm
58 mm
(
)
Frequency Response: 10 Hz to 20 kHz 1 dB
(
)
Signal-to-Noise Ratio: 100 dB 1 kHz IHF-A
Notes:
• Specifications comply with JEITA Standards.
• Specifications and design are subject to change
without notice for further improvement.
• Please make sure when connecting external power
amplifier, that you properly, to the car chassis,
ground the amplifier.
(
)
Dynamic Range: 95 dB 1 kHz
Harmonic Distortion: 0.01%
Audio
(
)
Maximum Power Output: 204 W 51 W X 4 ch
• If this is not done, severe damage to the source
unit may happen.
Continuous Average Power Output:
25 W X 4, into 4 Ω, 20 Hz to 20 kHz,1%THD
(
)
Bass Control Action 100 Hz : 14 dB
(
)
Treble Control Action 10 kHz : 14 dB
(
)
Line Output with A/C 1 kHz, 10 kΩ : 1.8 V
DB258R
18
Clarion Co., Ltd.
All Rights Reserved. Copyright © 2004: Clarion Co., Ltd.
Printed in Malaysia / Imprimé en Malaisie / Gedruckt in Malaysia / Stampato in Malaysia
PE-2740E
280-8153-00
Gedrukt in Maleisi / Impreso en Malasia / Tryckt i Malaysia / Impresso na Malásia
|