TENT SETUP INSTRUCTIONS
ConneMcOtDPEoL l2e00s00to078T2e4nt
Before you begin
tꢀ Read all instructions before set up.
tꢀ Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
tꢀ Do not set up your tent under trees because of potential lightning
strikes or falling tree limbs in inclement weather.
tꢀ Secure with all stakes and guylines provided to prevent property
damage or personal injury.
2
tꢀ Insert one pin into one end of the pole. (Fig. 3 and 4)
tꢀ Go to opposite end of pole and carefully insert the pin into the
other pole end. (Fig. 4)
tꢀ Repeat for all poles.
tꢀ For best results in windy conditions, position narrow end of tent
into the wind.
tꢀ Enlist the help of at least one other person to assist you when it
is time to assemble the tent.
Pole Descriptions
No.
Description
Qty.
Pole
Pole
5
Repair Kit Replacement Kit
1
2
3
Main Body Pole, black, longest
Vestibule Pole, grey, long
Ridge Pole, black, short
2
1
1
5010000539
5010000539
5010000539
5010000549
5010000549
5010000549
Fig. 3
Pole
Clip
Layout & Positioning
of Tent and Poles
Pole
Pin
1
tꢀ Layout and position the tent with door facing desired
direction. (Fig. 1)
tꢀ Stake down tent corners first through the stake rings. (Fig. 2)
tꢀ Keep the floor taut.
tꢀ Stake down the remainder of the stake rings.
tꢀ Assemble all poles by unfolding and interlocking the shock-
corded pole sections.
Fig. 5
tꢀ Insert the body poles & vestibule pole into the pole sleeves.
Fig. 4
Attach Tent to Body Poles
Using Clips
Pole
Sleeve
3
tꢀ Attach clips along the edges of tent to body poles. (Fig. 5)
tꢀ Make any adjustments to the tent stakes, if needed.
1
2
5
Attach Rainfly
5
4
tꢀ Attach ridge pole to underside of rainfly with straps and insert
the tips of the ridge pole into the pockets on underside of rainfly.
(Fig. 6 & 7)
Tent
Stake
tꢀ Drape rainfly over tent. (Fig. 8)
Fig. 1
tꢀ Connect the elastic loops with “S” hooks, (found at the rainfly
corners) to the rings found at the tent corners. (Fig. 9)
tꢀ Secure rainfly with straps located on the underside of rainfly.
(Fig. 10)
Stake Ring
tꢀ Attach and stake out guylines. (Fig. 8)
HINT: During setup, keep door zipped to keep proper tension
on fabric.
Fig. 2
(continued on other side)
|