Cooper Lighting Indoor Furnishings 201 D I User Manual

NEO-RAY  
Ordering Information:  
Sample number: 201-IP-SP-1T5HO-1C-277-DC48-T1-48  
2-1/2"  
[63mm]  
S
Series  
201-IP=Shell II  
201-DI=Shell D/I  
10-3/4" [275mm]  
T8 = 1, 2, 3 Lamp  
T5 = 2, 3, 4 Lamp  
Optics Up  
S=Specular  
Construction: Housing is one-piece, die-formed,  
cold rolled steel, forming a 10-3/4” x 2-1/2” curved  
architectural profile. Perforated sections are 33%  
open with staggered hole pattern and opal diffuser.  
Standard 4’-0”, 8’-0” and 12’-0” luminaire lengths  
combine for continuous runs.  
Optics Down  
P=Perforated (IP)  
H=RPerformance ™ Louver (DI)  
Number of Lamps (not included)  
1=1 Lamp (T5HO)  
2=2 Lamps(T5HO, T8)  
3=3 Lamps (T5HO, T8)  
4=4 Lamps (T8)  
SHELL II  
201-IP  
201-D/I  
Lamp Type (Length)  
T5HO=54W (4’ Unit)  
End Caps: End caps are precision die-cast  
aluminum mechanically attached without exposed  
fasteners.  
T8=32W (4’ Unit)  
Number of Circuits 1  
1=1 Circuit 2=2 Circuits (*Standard 2 circuit option will switch  
Inboard lamps together. Out board lamps will be on  
circuit two.)  
Reflectors: Center reflector is die-formed, highly  
specular aluminum.  
SEMI-INDIRECT (IP)  
Wiring 1  
DIRECT-INDIRECT (D/I)  
C=Standard Circuit  
E=Emergency/Nightlight T=Nightlight  
*Slim line ballast only (small case)  
B=Battery Pack  
D=Dimming  
Electrical: Luminaires are prewired with quick wire  
connectors and use UL list Class P, T5HO or T8  
program rapid start universal voltage electronic  
ballasts. Power factor of 97% with less than 10%  
THD. Fixtures and electrical components certified to  
UL and CUL standards.  
• Die formed steel perforated  
modular housing lengths –  
4’, 8’ and 12’ (201-IP only).  
Voltage 1  
1=120V  
2=277V  
3=347V  
U=Universal  
• Optional articulated joiners  
[not suitable for precise  
incremental mounting  
centers]  
Suspension  
D=Dual Cable  
P=Rigid Pendant 4 (single stem)  
Finish: Luminaire housings are standard white  
using electrostatically applied acrylic powder coat  
paint.  
Power Feed 1  
C=Straight Cord  
P=Rigid Pendant  
K=Curly Cord  
• Dual aircraft cable hangers  
for superior leveling.  
Suspension Length  
-Adjustable Cable  
Mounting: Standard mounting includes dual  
aircraft cable and mounts directly to all ceiling  
types. Row mounted fixtures are continuous with  
hairline joints unless Articulated Joint option is  
specified. Mounts on fixtures with Articulated Joint  
option will not align with grids.  
• Incremental mounting on the  
ceiling grid - 4’, 8’ and 12’  
(201-IP only) centers.  
48”, 120”, 240”, 300” or 360” (infinite adjustment along entire cable)  
-Rigid Pendant 2 12”, 15”, 18”, 21”, 24” or 27”  
Ceiling Type  
T1=1” T-Bar  
T9=9/16” T-Bar  
• Wide number of T5 and T8  
lamping options.  
ST=Structure  
JB=4” Octagonal J-Box  
TS=Slotted T-Bar  
• Precision die cast end caps.  
Run Length (Specify luminaire length in feet)  
-Individually Mounted Luminaires may be 4’, 8’ or 12’ in length.  
-Continuously Mounted Standard row configurations over 12’ consist  
of 8’ and 12’ sections.  
201-D/I features  
• RPerformance TM parabolic  
semi specular louver for RP-  
1 compliance.  
Joining 3  
AJ=Articulated Joining Luminaire sections may be joined with an  
optional aluminum coupler, which visually separates sections. Refer to  
back page for mounting details.  
• Die formed modular housing  
lengths – 4’ and 8’  
1 Due to various constraints, some options may not be combined with others.  
2 Consult factory for custom rigid pendant lengths.  
3 Articulated Joining option will not align with grids.  
• Incremental mounting on the  
ceiling grid - 4’ and 8’  
centers.  
= Slim Line Ballast only.  
S
4 Available with 7° or earthquake 45° swivel canopy assembly.  
AJ - Articulated Joining  
END CAP  
B
STANDARD LUMINAIRE LENGTHS*  
10-3/4" [275mm]  
2-1/2" [63mm]  
1-1/4" [32mm]  
Optional aluminum coupler  
1-1/4"  
8’  
8’  
NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be  
modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.  
COOPER LIGHTING 717  
 

Compaq Saw FS8500RS User Manual
Cooper Lighting Indoor Furnishings BASIX Series User Manual
Curtis Stereo System RCD856 User Manual
CyberData Network Card Ethernet IV Printer Module User Manual
Delta Electronics Power Supply HCB0750 User Manual
Dymo Printer LP200 User Manual
Everpure Water System MRS 100 User Manual
Fusion Portable Speaker MS 0S420 User Manual
Global Machinery Company Drill DP21 User Manual
Global Machinery Company Nail Gun Electric Nailer User Manual