®
MCGRAW-EDISON
DESCRIPTION
DIMENSIONS
The Galleria Round combines
beauty and versatility to make it
the optimum choice in today's
energy- and design-conscious
environment. An aesthetic reveal
in the roll-formed aluminum
housing carries on the Galleria
family look while a variety of
mounting options and lamp
wattages provide maximum
flexibility.
A
F
B
C
D
D
E
GR
GALLERIA
ROUND
Fixture
A
B
3 1/2"
C
D
24 1/2"
E
F
16"
P o w e r e d b y
GRM 150-1000W 18 1/4"
19 3/4"
[502mm]
25 5/8"
6" or 14"
150-400W
GRL 1000W
[464mm] [89mm]
19 3/4" 4 1/2"
[502mm] [108mm] [651mm]
[676mm] [152mm] or [356mm] [406mm]
32 15/16" 6" or 14" 19 3/4"
[837mm] [152mm] or 356mm] [502mm]
t e c h n o l o g y
1 5 0 - 1 0 0 0 W
Metal Halide
ORDERING INFORMATION
SAMPLE NUMBER: GRM-AM-250-MH-120-FT-FG-DP-L
Pulse Start Metal Halide
High Pressure Sodium
9
15
Product Family
GRM=Galleria
Round
Medium
GRL=Galleria
Round
Lamp
Wattage
Lamp Type
MH=Metal
Halide
MP=Pulse
Start
Voltage
Distribution
Horizontal
1F=Type I
Formed
2F=Type II
Formed
3F=Type III
Formed
FT=Forward Throw
Vertical
AR=Area Round
AS=Area Square
3V=Type III Vertical
RW=Rectangular Wide
Lens Type
FG=Flat Glass
SG=Sag Glass
Colors
Options &
3
14
120=120V
208=208V
240=240V
277=277V
(add as suffix) Accessories
BZ=Bronze
AP=Grey
BK=Black
WH=White
DP=Dark Platinum
GM=Graphite Metallic
150=150W
175=175W
250=250W
320=320W
350=350W
400=400W
(See Below)
ARCHITECTURAL
AREA LUMINAIRE
12
4
4
5
Metal
Halide
(CWA)
480=480V
10
Large
MT=Multi-Tap
TT=Triple-Tap
E1=Electronic
120-277V
E2=Electronic
200-277V
10
6
1000=1000W
HPS=High
Mounting Method
AM=Arm Mount
11
1
Pressure
Sodium
MPE=ECON
AIR=Arm Included
for Round Pole
AIS=Arm Included
for Square Pole
SM=Spider for
3" O.D. Tenon
TM
2
Electronic
Powered
Pulse Start
Metal Halide
In all flat glass configurations.
13
2
7
TM
MPD=ECON
• Roll-formed aluminum
housing with stamped
reveal has interior-welded
seams for structural
Dimmable
Electronic
Powered
Pulse Start
Metal Halide
7,
8
integrity and is finished
in premium TGIC
polyester powder coat
E.P.A. Single Medium Fixture (without arm): 1.7 / Single Large Fixture (without arm): 2.5
Spider Mount Medium: 2.0 / Spider Mount Large: 2.8
• Ballast tray is
hard-mounted to housing
interior for easy access
and cooler operation
16
19
Options
Accessories
F=Single Fuse (120, 277 or 347V)
FF=Double Fused (208, 240 or 480V)
MA1061=House Side Shield—Medium Housing (Field Installed)
MA1062=House Side Shield—Large Housing (Field Installed)
OA/RA1016=Photocontrol–Multi-Tap
OA/RA1027=Photocontrol–480V
OA1201=NEMA Twistlock Photocontrol—347V
MA1025XX=14" Arm for Square Pole. 1.0 EPA
MA1026XX=6" Arm for Square Pole. 0.5 EPA
MA1027XX=14" Arm for Round Pole. 1.0 EPA
MA1028XX=6" Arm for Round Pole. 0.5 EPA
• Long-life ballast core and
coil
EM=Quartz Restrike with Delay (Hot Restrike Only)
Q=Quartz Restrike (Hot Restrike Only)
R=NEMA Twistlock Photocontrol Receptacle
17
• Spun and stamped
aluminum reflector in
vertical lamp units, or
hydroformed anodized
aluminum reflector in
horizontal lamp units.
Rotatable optics standard
HS=House Side Shield
VS=Vandal Shield
18
L=Lamp Included
MA1029XX=Wall Mount Bracket with 10" Arm
MA1010XX=Single-Arm Tenon Adapter for 3 1/2" O.D. Tenon
MA1011XX=2 @ 180° Tenon Adapter for 3 1/2" O.D. Tenon
MA1012XX=3 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1013XX=4 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1014XX=2 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
MA1015XX=2 @ 120° Tenon Adapter for 3 1/2" O.D. Tenon
MA1016XX=3 @ 90° Tenon Adapter for 3 1/2" O.D. Tenon
• Formed aluminum door
for arm-mount fixture has
retaining springs, while
spider-mount unit has a
heavy-duty hinge and
12
MA1017XX=Single-Arm Tenon Adapter for 2 3/8" O.D. Tenon
12
MA1018XX=2 @ 180° Tenon Adapter for 2 3/8" O.D. Tenon
MA1019XX=3 @ 120° Tenon Adapter for 2 3/8" O.D. Tenon
MA1045XX=4 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
MA1048XX=2 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
12
12
12
captive retaining screws
12
MA1049XX=3 @ 90° Tenon Adapter for 2 3/8" O.D. Tenon
• Flat or convex tempered
glass lens
• U.L. listed for wet
locations. CSA certified
NOTES: 1 Arm not included. See Accessories. 2 Arm length varies based on housing size: 11-1/2" for GRM and 14" for GRL. 3 150W medium-base socket. 175W-1000W
mogul-base. 4 Pulse Start Metal Halide only. 5 Requires reduced envelope ED-28 lamp when used with GRM housing and flat glass vertically lamped optics.
6 1000W in GRM housing requires reduced envelope BT-37 lamp. 7 Only available in 250-400W Pulse Start Metal Halide and vertical optics. Must specify E1 or E2
voltage. 8 Provides 0-10V DC low voltage, leads used in dimming control. 9 Product also available in non-US voltages and 50Hz for international markets. Consult
factory for availability and ordering information. 10 Multi-Tap ballast is 120/208/240/277V wired 277V. Triple-Tap ballast is 120/277/347V wired 347V. 11 250W only.
12 Medium housing fixture only. 13 RW optic not available with flat glass. 14 1000W GRL with flat glass requires BT-37 lamp and is not available in AS, RW or 3V
distributions. 15 Other finish colors available, including a full line of RAL color matches. Consult your Cooper Lighting Representative. 16 Add as suffix in the
order shown. 17 House side shield available on 2F, 3F, FT and all vertically lamped distributions when combined with sag glass. 18 Arm mount only, 400W
• Approximate net weight:
86 lbs. (40 kgs.)
1164 COOPER LIGHTING
Maximum. 19 Order separately, replace XX with color suffix. 20 Specifications and dimensions subject to change without notice.
|