Ex2900 / Ex3200 ATTACHMENTS
CL300 Loader
Curved boom is constructed from 2” x 5” A500 structural steel, one-piece beam.
A 4” x 2” A500 structural steel torque beam attaches the curved boom beams
together. Features a heavy-duty 5 cu. ft. bucket with reinforced wear plates.
Curved boom design allows for bucket visibility and clear sight lines.
QuickAttach™ system also included.
CB75 Backhoe
QuickAttach™ system allows you to install or remove the backhoe in minutes as it
sets in the cradle with two locking pins. Single Power Beyond kit powers the
backhoe for reliability, control and smooth operation. Dual swing cylinders allow
for precise control of backhoe along foundations and provide more power for
backfilling. Curved boom assembly gives the operator better sight lines when
digging.
MM60RS Mid-Mount Mower
Mid-mount 60” deck with superior vacuum for a cleaner cut. Features an 11-
gauge stamped reinforced deck edge and cast-aluminum gearbox housing with
long-lasting Timken® tapered bearings. Cast-aluminum spindle housings with
7/8” shaft allows for cooler operation. Pulleys are machined from one piece of
steel for balance, reducing vibration and wear to the shaft. Marbane high-lift
blades harden to a Rockwell 50 rating. This extends the life of the blade while
giving a clean cut. QuickAttach™ system allows the deck to be installed and
removed quickly by using J-pins. SmartJet™ deck wash system allows a garden
hose to be attached to the deck cleaning.
FM60/FM72 Rear Finishing Mower
Features an 10-gauge deck housing and reinforcement plate under the spindle
assembly. Rear discharge disperses cuttings cleanly and evenly. Comes with a
wide range of cutting heights from 1” to 4” for clean cuts on all lawns. Gearbox is
highly engineered and rugged with straight-cut gears, casted cooling fins and
completely enclosed seals. The 4 durable composite rubber caster wheels give a
perfectly level cut while eliminating the worry of flat tires. Category 1, full floating
deck allows the mower to follow the contours of the land.
Ex2900 / Ex3200 ATTACHMENTS
BS60 Box Scraper
Heavy-duty A-frame is constructed from ½” thick steel for greater control and
strength during grading and backfill operations. The A-frame and box are
attached with a 5/8” thick steel frame making the scraper extremely rigid for
uncompromising control. The 4” x 4-1/2” cross beam is the main structural
component. The box is made out of ¼” thick steel with ¼” thick reinforcement
brackets at each corner. The 5/8” hardened steel ripping shanks with
replaceable tips allow them to dig into the toughest soil conditions. Reversible
hardened blades give longer life.
FB72 72” Dozerblade
Heavy-duty moldboard allows for longer life in all working conditions. The ¼”
high-carbon reversible cutting edge gives the blade longer life. Hydraulic
power angle provides smooth, precise control. Power down pressure allows
the blade to dig into the ground to loosen packed snow or hard dirt.
QuickAttach™ hitch makes attaching and detaching the blade easy and fast.
RC60 60” Rotary Cutter
Deck housing is constructed from 10-gauge steel and reinforced with a 10-
gauge plate under the gearbox assembly. Features cutting height adjustment
from 1” to 9-1/4” with oval stump jumper. Heavy-duty drive line with shear bolt
protection transfers power smoothly and protects the valuable components of
the tractor. Hardened spring steel blades are mounted on high-carbon steel
rotors. Floating top link allows for rotary cutter to follow the contour of the
land for clean and even cutting. Laminated tail wheel is puncture resistant and
long wearing in harsh brush-cutting conditions.
HC300 Hard Cab Assembly
The steel-constructed roof is lined with a fabric headliner to help reduce
drivetrain noise and increase operator comfort and overall appearance. Steel
doors with fixed glass allow for a tighter seal over fabric door construction and
provide better climate control. Front windshield with tempered glass is clearer
and more durable, and provides better performance from the wiper assembly
with less window flex. Standard front windshield wiper with single speed
provides for clearer sight lines in adverse conditions. Soft rear removable
panel makes it a snap to open the cab in warmer conditions.
|