CyberData Corporation
Unicast-to-Multicast Adaptor
The Unicast-to-Multicast Adaptor is used
in a LAN/WAN environment that does not
support the forwarding of Multicast type
data across the network.
Through a predefined command port, the
user sends a message that defines the
Multicast output address.
Unicast Audio data is then sent to the
Unicast-to-Multicast Adaptor and
forwarded on as a Multicast stream.
Up to 4 channels can be sent
Unicast-to-Multicast Adaptor Specifications
simultaneously.
Protocols
Unicast, Multicast Audio
10/100 Mbps
Ethernet I/F
The device connects via a single cable to
a standard PoE 802.3af compliant hub.
Power Input
PoE 802.3af or 48VDC
Payload Types
Regulatory Compliance
Dimensions
G711 µ-law and A-law
FCC Class A, UL 60950, CE
6.11”L x 4.05”W x 1.15”H
2 years limited
Warranty
Features
PoE 802.3af enabled
(Power-over-Ethernet)
Dual-speed Ethernet 10/100 Mbps
Unicast Input
Multicast output
Web-based configuration
Web-based upgradeable firmware
Connector for external power supply
Small footprint
IGMP
CyberData Corporation 2555 Garden Road Monterey, California 93940
(831) 373-2601 (831) 373-4193 www.cyberdata.net
930236A/080828
CyberData Corporation
|