ZET3038SH/WH/BH – GE Monogram 30" Built-In Single Oven
with Trivection™ Technology
Dimensions (in inches)
30" Built-In Single Oven Dimensions (in inches)
Acceptable
junction box
location area
SWO
Cutout Width
28-1/2'' min.
28-5/8'' max.
Cutout Depth
23-1/2'' min.
B
29-3/4''
18"
12"
A
Bottom of
Cutout
Cutout Height
27-1/4'' min.
27-5/16'' max.
28-1/4''
3-1/2"
"
Recommended
Cutout Location
32-1/2" from
the floor
KW Rating
240V
5.9
21''
208V
4.4
Allow min. of 21'' for
clearance to adjacent corners,
drawers, walls, or etc.
30''
Breaker Size
240V
30 Amps
30 Amps
A = Allow 11/16" - 3/4" for overlap of oven over side edges of cutout.
B = Allow 1" overlap of oven over top and 1-1/4" overlap at the bottom
edges of cutout.
208V
Note: These ovens are not approved for stackable or
side-by-side installations.
Note: Cabinets installed adjacent to wall ovens must have an
adhesion spec of at least a 194°F temperature rating.
C
L
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
2 x 4 or
equivalent
runners
Electric wall ovens are not approved for installation
with a plug and receptacle. They must be hard wired in
accordance with installation instructions.
Suitable
bracing
Listed by
Underwriters
Laboratories
21-5/8"
over centerline
of cabinet
to support
runners
R
®
For answers to your Monogram, GE Profile™ or
(Must support 225 lbs.)
GE® appliance questions, visit our website at
GEAppliances.com or call
Specification Revised 6/04
GE Answer Center® service, 800.626.2000.
130311
|