Eagle Electronics Pager PG 2091F User Manual

Flex  
USER MANUAL  
PG-2091F USER MANUAL VER:NEW ISSUE  
1
OF 11  
 
1. Appearance  
Read / replace key  
Setting / selection key  
Function key  
2. Features and Icon Definitions  
(a) Features  
12 audio alerts  
Vibration alert  
3 alarm settings  
4 address codes  
15 message memory protection / 20 total  
18 characters reception  
Manual frequency and address code programming  
Low battery indication  
Duplicate and unread message indication  
Message full indication  
(b) Icon Definitions  
Menu indication icons  
Sound alert mode is on  
Mute / vibration mode is on  
Alarm is on  
Message status display icons  
Message serial number and resource indication icon  
PG-2091F USER MANUAL VER:NEW ISSUE  
3
OF 11  
 
Message protection \ lock icon  
Message continued icon  
Duplicate message icon  
Function selection icons  
Time setting  
Sound alert setting  
Mute / vibration mode setting  
Alarm setting  
Message deletion  
Other display icons  
Low battery warning  
Blinking when out of receiving area  
3. Turning on the pager  
After installing the battery, the pager will give out an audio or vibration alert. Press the Read  
/ replace key then time and date will be displayed on the screen.  
Turn on the pager to display:  
Standby mode display while the pager is on audio alert  
Standby mode display while the pager is on vibration alert  
Now your pager is in standby mode and can receive messages at any time.  
In standby mode with date displaying, press the setting / selection key  
week as follows:  
to display the  
Press the setting / selection key  
to select date or week as the standby mode display.  
Standby mode display while the pager is turned off:  
PG-2091F USER MANUAL VER:NEW ISSUE  
4
OF 11  
 
To turn off the pager, press the function key  
to select the “OFF?” function. Then press the  
setting /selection key  
to turn off the pager.  
4. Various functions  
In standby mode, press the function key  
to start function selection. Press the function key  
repeatedly till desired function is displayed on the menu, then press the setting /selection  
key  
to confirm that function.  
“SET ALERT?” function. Please consult “Alert setting”.  
“OFF?” function.  
“SET TIME?” function. Please consult “Time setting”.  
“SET DATE?” function. Please consult “Date setting”.  
“SET AUDIO?” function. Please consult “Audio alert setting”.  
“SET ALARM?” function. Please consult “Alarm setting”.  
“CLEAR ALL?” function. Please consult “Delete message”.  
PG-2091F USER MANUAL VER:NEW ISSUE  
5
OF 11  
 
[If no message, all messages locked, or all messages unread, “CLEAR ALL?” function will  
not be displayed in function options.]  
Note: If you want to exit from functions selection without any changes, please press the Read  
/ replace key  
. The pager will automatically return to standby mode display in 8  
seconds if no keys are pressed.  
4.1. Receive and read messages  
Press the Read / replace key  
to read messages. If there’s no message stored in the  
pager, “NO PAGES” will be displayed .  
When the pager has received messages, the number of unread messages will be displayed as  
follows:  
This display indicates 2 unread messages. An unread messages alert will remind you of  
unread messages. The number at the bottom left corner shows the number of received  
message. Press the read / replace key  
to display the message.  
The first part of the message [ received message: 861 579 0234, time received: 13:53 noon of  
April 27.]  
The number at the bottom left corner shows its the 8th message. Press the Read / replace key  
again to display time and date the message was received.  
The number at the bottom left corner shows the 1st address code .  
Press the setting /selection key  
to read the next message.  
At any time when you are reading messages, pressing the function key  
for 5 seconds to  
return to standby mode. Your pager can automatically store received messages along with  
their time and date. When stored memory is full, “MEMORY FULL” indication will be  
displayed in standby mode . Receiving of any new message will lead to permanent deletion  
of the oldest and unlock message.  
PG-2091F USER MANUAL VER:NEW ISSUE  
6
OF 11  
 
If the pager is full of unread messages and one unread message has been deleted by a new  
received message, an “OVERFLOW” indication will be displayed on the pager.  
If the pager receives a duplicate message repeatedly, a duplicate message icon will be  
displayed to show that the message is a dupliate one. Under such a circumstance, the  
receiving time of the message will be updated to the latest. If it’s the same message from  
different resources, the two messages will not be regarded as the duplicate.  
4.2. Message protection and unlock  
You can “lock” or “protect” maximum of 15 messages from being deleted by the new  
message when memory overflows.  
In order to lock or protect a message, press the function key  
while reading the message.  
When “PROTECT?” emerges on the display, press the setting /selection key  
message. The lock icon shows that the message has been locked.  
to lock the  
In order to unlock a message, press the function key  
first, then press the setting /selection  
key to unlock the message while reading the message.  
Note: “FULL” indication will be displayed when you press the setting /selection key  
to  
protect one more message while already having 15 messages locked.  
4.3. Messages deleting selectively  
In order to selectively delete messages, press the function key  
unlocked messages. Then “DELETE?” indication will be displayed .  
twice while reading  
PG-2091F USER MANUAL VER:NEW ISSUE  
7
OF 11  
 
Press the setting /selection key  
to confirm the selective deletion.  
4.4. Delete messages  
The pager has two way of deleting messages.  
1) Select “CLEAR ALL?” function to delete all read and unlock messages.  
2) Select “DELETE?” selectively deleting function to delete some read message.  
Press the setting /selection key  
to confirm all unlocked read message will be deleted.  
Note: “CLEAR ALL?” function will not be displayed in function selection items under the  
following circumstances:  
1) No message stored.  
2) All messages unread.  
3) All messages have been read and locked.  
4.5. Time setting  
Press the function key  
to display:  
1) Press the setting /selection key  
to move cursor from one blinking position to another.  
The order is [ HH—>MM—>A / P—>12Hr/24Hr.]  
2) Press the function key  
to adjust the digit to the current time.  
Repeat step 1 and 2 in every position to adjust to correct time.  
Press the Read / replace key  
to confirm your setting.  
4.6. Date setting  
Press the fumction key  
to display:  
Press the setting /selection key  
Press the setting /selection key  
is [MM—DD—YY].  
to enter date setting mode.  
to move from one blinking position to another. The order  
Press the function key  
to adjust the digit in every position to correct date.  
PG-2091F USER MANUAL VER:NEW ISSUE  
8
OF 11  
 
Repeat above steps in every position to adjust to correct date.  
Press the Read / replace key at any time to confirm your setting .  
4.7. Alert setting  
Press the function key  
to display:  
In the “SET ALERT” function, you can select the following 3 kinds of alert:  
1) AUDIO alert - Press the Setting / selection key to set audio alert; or press the function  
key to enter next option.  
2) MOTOR alert - Press the Setting / selection key  
key to enter next option.  
to set vibration alert; or press the function  
3) MUTE alert - Press the Setting / selection key  
to confirm mute alert and enter mute  
receiving time setting. In this mode, the received message will only display on the menu  
without sound or vibration.  
4.8. Audio alert setting  
Press the function key  
to display:  
In the “SET AUDIO?” function, you can select one alert from the 5 alerts or 12 melody alerts  
for receiving messages or turning on the pager.  
When “SET AUDIO?” function displayed on the screen, press setting /selection key  
Press the function key  
give out example alert for about 2 seconds.  
.
untill you get your desired alert.After each selection, the pager will  
Press the Setting / selection key  
to confirm your selection.  
PG-2091F USER MANUAL VER:NEW ISSUE  
9
OF 11  
 
or  
Note: if your pager is in mute or motor status, “SET AUDIO?” function will not appear in  
function selection items.  
4.9. Time setting of mute receiving  
You may set mute receiving time for 1 to 10 hours. By the time the pager will give out short  
alert and change to sound alert receiving mode. Or set permanent mute receiving until  
resetting other alert mode.  
This shows permanent mute receiving. Press the setting /selection key  
setting or press the function key to enter next option.  
to confirm this  
It shows 1 hour mute receiving. The pager will give out short alert 1 hour later and enter  
sound alert receiving mode. Press the setting /selection key to confirm this setting or  
press the function key  
to enter next option  
4.10. Alarm setting  
Alarm function may be used for everyday alarm or dating reminder.  
In “SET ALARM?” function, press the setting /selection key to enter alarm setting mode.  
Press the function key  
to select from alarm 1 , 2 or 3.  
Press the Setting / selection key  
to confirm your selection.  
Press the function key  
to select turning the alarm ON/ OFF.  
Press the setting /selection key  
to move to the position needed changing, then press the  
function key  
Repeat the above steps in every position to adjust the alarm time.  
Press the read / replace key to confirm your alarm setting.  
to adjust the alarm time.  
Alarm icon in standby mode or OFF mode shows an alarm is ON. Alarm icon will not display  
when all alarm released.  
PG-2091F USER MANUAL VER:NEW ISSUE  
10 OF 11  
 
The pager will give out alert and display “ALARM” indication and flashing alarm ON icon  
when any alarm rings at set time.  
Note: You can set maximum of 3 alarms. Alarm 1 and 2 is for everyday timed alarm; alarm 3  
is for dating reminder, only ringing once at some set time and not repeating ringing the next  
day.  
5. Attentions:  
Avoid humidity, high temperature, magnetic field and fierce bumping.  
Please sent to service center for repair.  
Do not attempt to open the pager for repair .  
United Communications Corporation  
888-763-7550  
PG-2091F USER MANUAL VER:NEW ISSUE  
11 OF 11  
 

Echo Trimmer SRM 265U User Manual
Eiki Projector LC SM4 User Manual
Eizo Computer Monitor FS2332 User Manual
Extron electronic Stereo Amplifier P 2 DA User Manual
Fiesta Gas Grill EZT34535 B301 User Manual
Fisher Price Doll W1710 User Manual
FMI Indoor Fireplace CDCFNRB User Manual
Gardena Weather Radio ART1189 User Manual
Gemini Music Mixer PMX 05 User Manual
Gemini Turntable iTT User Manual