Eiki A-6
Multi Media Port
Instruction Manual
Package contents
Item
Qty.
Multi Media Port
Interface cable
Screw terminal plugs
Please note:
1
1
2
Because its function can be shared with other equipment in a
system, a DC power supply is not included.
For standalone use, the power supply you use should be
capable of supplying 9 to 16 volts DC at up to 100mA.
Introduction
The A-6 Multi Media Port combines the following
functions:
•
•
•
•
Input plate
Four input Audio-video switcher
Two input RGBHV switcher
RGBHV splitter
in a single-gang wallplate. The Eiki A-6 greatly
simplifies installation and cabling and avoids the
need in most cases for video/audio and RGBHV
switchers.
Anyone who has ever had to manage AV
facilities will appreciate these unique features of
the MultiMedia Port:
•
A fast-response “Signal Present”
indicator LED for the laptop input helps a
user to quickly set up a laptop so that it
is outputting a signal.
•
MultiMedia Ports can be installed in
different parts of a room and “daisy-
chained” to create an economical multi-
point input solution with minimal wiring
and no central switchers.
Front view
•
A “Monitor” output allows a desktop PC
to display its output on a projector and
its own monitor at the same time.
PC
A in 1
V1in
V2in
V4in
A in 2L
A in 2R
The diagrams on this page show the inputs and
outputs that are available on the A-6 Multi
Media Port. The rear connections use screw
terminal plugs to simplify the installation of
fixed wiring.
A in L
PC
A in R
Vout
RL1
A out L
A out R
RL2
The Eiki A-6 is an ideal companion for the Eiki
MCS-1 and connects directly to it with the
supplied interface cable.
+24v
The A-6 may also be controlled by other
systems. It includes video sensor outputs that
may be read by external equipment. Or the A-6
may be used standalone and locked to any fixed
input arrangement by a combination of
connections on the interface cable.
Control
& power
Projector
Rear view
Please note that the Cable Compensation
provision marked on the rear of the unit is not
implemented in current production.
Eiki A-6 manual
Page 3
Input terminals
On the front of the unit there are the following connections:
•
•
•
•
One VGA input
One VGA monitor output. This follows the output of the switcher.
Two RCA sockets for line audio, shared with a 3.5mm stereo jack
One RCA socket for composite video input.
The audio and video inputs are accessed together as Input 3. The VGA input is
switched separately. If you want to use the audio inputs with the VGA input you
have to select them separately as AV input 3.
On the rear of the unit there are the following connections:
•
•
•
•
•
•
•
One VGA input on HDDB15 connector
One VGA projector output on HDDB15 connector
Three audio inputs on screw terminal connectors. Input 1 is a mono input.
Three video inputs on screw terminal connectors.
One pair of stereo audio outputs on screw terminal connectors
One Composite video output on screw terminal connectors
Two breakout connections from the Control and Power socket for relay drive.
(See notes on the following page for more information.)
Audio input 4 would normally be used in conjunction with the rear PC input.
There is an internal 2 pin jumper that, when linked, converts to output to mono by
combining L and R audio signals.
With no control inputs asserted, AV 1 and the rear VGA input is selected.
Block diagram of the A-6 Multi Media port showing programming interface.
A out L
A out R
Vout
+24v
RL2
A in 1
A in 2 L
A in 2 R
Front L
Front R
PC audio
(L&R)
Audio
Buffer
RL1
Audio
Buffer
A in PC L
A in PC R
Control & Power
1. Relay drive 1
2. Relay drive 2
3.
4. RGB front/rear
5. AV swr LS bit
6. AV swr MS bit
7. RGBHV present
8. Video present
9. Gnd.
Video
Buffer
V1 in
V2 in
Video
V3 Front
10. +9 to 24v DC
Sync
detect
Connections
shown on a
light green
background
are on the rear
of the unit.
V4 in
Rear
(Projector)
Rear
(PC)
RGBHV
Buffer
VGA out
VGA in
Front
(Monitor)
Front
Those with a
grey
background
are on the front.
(laptop)
Sync
detect
Signal
Present
LED
Eiki A-6 manual
Page 4
A typical application using an MCS-1 for control
Mains
Relay
RGBHV
RS-232
Video
DVD-VCR
combo
Desk
PC
External
relay
connections
PC
A in 1
V1in
V2in
V4in
Connect the
coil of a 12v
UR approved
DIN rail relay
to “RL1” and
“+24v”.
A in 2L
A in 2R
External A/V
device, e.g.
camcorder
A in L
PC
A in R
Vout
RL1
A out L
A out R
RL2
External PC,
e.g. laptop
+24v
The voltage
and current
limits are
determined by
the relay
Control
& power
Projector
Rear
view
Front
view
used.
Audio
amplifier
MultiMedia
Port
RoHS
compliant
RS232 ports
2-Aux.
1-Pgm.
1 - Gnd
2 - +12V
3 - Data
4 - IROut
5 - TxD 1
MCS-1
EIKI INDUSTRIAL CO., LTD
NANIWA BLDG.,
Access
Port
6 - RxD 4-12 BANZAI-CHO, KITA-KU
7 - TxD 2
8 - PIR in
OSAKA, 530-0028 JAPAN
IR out
MADE IN AUSTRALIA
Eiki A-6 manual
Page 5
Programming an MCS-1 to control the A-6 Multi Media Port
•
•
In the Eiki Control System Editor, select MCS-1 as your device.
In “Edit behaviour” mode, double-click the key you wish to program. A
dialog like that shown will appear.
•
•
•
You can choose the inputs of the A-6 you wish to select when the button is
pressed by using the drop-down items in the Multimedia Port section, as
shown.
Eiki Control System Editor software version 2.7.15 or later has a “Relay
Output” drop-down item that allows you to operate an external relay which
can be used to control a motorised screen or lights, for example.
Make sure that when you are programming keys that should not change the
state on the A-6 Multi Media Port, the selections are left at the default of
“No change”.
“AV 1 (rear)”
will select A in
1 and V1 in
inputs on the
rear of the unit.
Audio and video
inputs are
switched
simultaneously.
“RGB front” will
select the VGA
socket marked
“Laptop” on the
front of the unit.
Please note that
any audio
associated with an
RGB input must be
selected separately
using the
A/V Selection
drop-down. Audio
for RGB Front would
be selected with
“AV 3 (front)”
Eiki A-6 manual
Page 6
Interfacing to the MultiMedia Port.
If you wish to control the A-6 internal switchers in some other way, or configure the
unit as a standalone, fixed input wallplate, you will need to know the control port
connector pinouts for the ribbon cable. They are as follows:
Pin
1
2
3
4
5
6
7
8
Function
Type
Logic Low
Logic Low
Comment
RL1
RL2 (not implemented on MCS-1)
Not used
Relay output
Relay output
GP output 2
RGBHV source
AV source 1
AV source 2
RGBHV sense
Video sense
GND
Logic Low input Low = Front PC input
Logic Low input See table below
Logic Low input See table below
Logic output
Logic output
9
10
+24 v
Power
Any positive voltage from 9v to
30v. DC.
AV switcher truth table
Input
Pin 5
Pin 6
Comments
AV in 1 (rear)
AV in 2 (rear)
Video & Audio 3
(front)
H
L
H
H
H
L
Audio 1 is mono. Video 1. On rear
Audio and video 2 on rear
Audio shared with front PC socket
Front video input
A in PC (rear)
L
L
Audio from rear PC socket
Video 4 input rear
“H” = not connected.
“L” = connected to pin 9
Eiki A-6 manual
Page 7
U.S.A.
Canada
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : [email protected]
U.S.A.
Tel : 800-242-3454 (949)-457-0200
Fax : 800-457-3454 (949)-457-7878
E-Mail : [email protected]
Deutschland & Österreich
Eastern Europe
EIKI Deutschland GmbH
Am Frauwald 12
EIKI CZECH spol. s.r.o.
Umělecká 15
65510 Idstein
170 00 Praha 7
Deutschland
Czech Republic
Tel : 06126-9371-0
Fax : 06126-9371-14
E-Mail : [email protected]
Tel : +42 02 20570024
+42 02 20571413
Fax : +42 02 20571411
E-Mail : [email protected]
Eiki (Shanghai) Co., LTD
Japan & Worldwide
1. Dapu Road,
Golden Magnolia Plaza
#2109 Shanghai,
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
200023 China
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
E-Mail : [email protected]
Tel : 86-21-5396-0088
Fax : 86-21-5396-0318
E-mail : [email protected]
For the latest software and information go to:
|