hideAwAy® surfAce Access enclosures
®
Hideaway HSA 200S Series
Compact, Fixed Configuration, Tilt-Up HSA - Hideaway Surface Access Enclosures with Square Bezel
CoMMon features
•
Durable pneumatic movement and mechanical latching mechanism
HSA 200SE includes built-in Extender video and audio line driver
Top surface available in black anodized or brushed aluminum finishes
One female 15-pin HD connector and 3.5 mm mini stereo audio jack
Two CAT 6 RJ-45 network/data/phone connectors; unswitched AC outlet
The HSA 200S and HSA 200SE include an RJ-45 connection kit for each front panel RJ-45 jack.
Inside the kit, there is one set of icons for labeling, one blank hole filler, and an assortment of
colored bezels. This offers the option of labeling and color-coding the RJ-45 connectors as they
pertain to their assigned function, or covering the connector when it is not needed. The Hideaway
HSA 200S and HSA 200SE ship standard in black anodized or brushed aluminum finish.*
•
•
•
•
•
Versions are available with discrete US, Australia, UK, Central Europe, Switzerland, France,
Israel, or India power outlets, as well as a universal receptacle ideal for use in hotels and
conference centers.
Versions available with US, Australia, UK, Central Europe, Switzerland, France,
Israel, or India power outlets
•
Available Universal AC power receptacle accepts US, UK, Israel, Central
Europe, France, Australia, India, Swiss, Italy, and Denmark AC plug types
*Polished aluminum finish and brushed brass finish are also available. These models are built to order and
require a longer lead time. Call an Extron Customer Support Representative for more information.
•
•
•
UL/CUL listed and CE compliant
Installation routing template available upon request
Brushed brass and polished aluminum finishes available by special order,
requires 11-14 week lead time
desCriPtion
Extron
HSA 200S
The Extron Hideaway HSA 200S and HSA 200SE provide compact, tilt-up, architectural
solutions for inconspicuous computer-video interface connector access. The HSA 200SE
provides a built-in Extron Extender line driver, which allows computer video signals to be output
on five BNC pigtails and driven over long cable runs without degradation of the signal. The
Extender also converts unbalanced audio to a balanced signal.
Hideaway Surface
Access Enclosure
with Extender
Line Driver
The HSA 200S and HSA 200SE square bezel enclosures are designed for easy mounting
into virtually any table surface and are ergonomically designed, keeping installation time and
effort at a minimum. Once installed, the HSA 200S and HSA 200SE products fit flush with the
tabletop, storing connectors out of sight. To access the connectors, users press down on the
top of the enclosure. Pressing down releases a mechanical latch and the HSA slowly pivots into
view, presenting the connectors at an ergonomic 49-degree angle to the tabletop.
Mounted
through a table
or lectern
Both models offer one female 15-pin HD connector, one unswitched AC outlet, two
bezel-mounted CAT 6 RJ-45 network/data/phone connectors, and audio on 3.5 mm stereo
jack connectors on its faceplate.
Continued
144
USA West
USA East
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
hideAwAy® surfAce Access enclosures
®
Hideaway HSA 200S Series
®
Hideaway HSA 200C Series Accessories
routinG teMPlates
Model desCriPtion
PaGe
Part #
HSA 200/222 and Cable Cubby 300S/300C
Routing Template: US Template
HSA 200/222 Routing Template
HSA 200/222 US Routing Template. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n/a
HSA 200/222 International Routing Template. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . n/a
70-237-01
70-237-02
oPtional aCCessories
Model desCriPtion
PaGe
Part #
HSA 200 RJ-11 Cable Kit
For HSA - Hideaway Surface Access Enclosures - HSA 200 Kit . . . . . . . . . . . . . . . . . . n/a
70-231-01
70-229-01
Flexible Conduit Adapter Kit For HSA 200/222 Installation Kit for Hard Wired Electrical Environments - HSA 200/222. . . . . . . . . . page 140
General
sPeCifiCations
Power (HSA 200SE).............. Supplied by an external power supply
video
—
Hsa 200se
External power supply: 100 VAC to 240 VAC, 50/60 Hz, external,
autoswitchable; to 12 VDC, 0.42 A, regulated
Power input requirements: 12 VDC, 0.2 A
Gain................................ Selectable: unity (0.7 V), (0.75 V) 50%, (0.8 V) 100%
Bandwidth ........................ 300 MHz (-3 dB)
NOTE: ID bits are terminated on pins 4 and 11.
Temperature / Humidity
(
HSA 200SE)....................... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
video inPut
—
Hsa 200s
Operating: +3° to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Number / Signal type........... 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs
Connectors ....................... (1) 15-pin HD female
Rack mount ...................... No, but furniture mountable
Enclosure type................... Metal
Enclosure dimensions
video inPut
—
Hsa 200se
CAUTION: Use the appropriate metal Extron routing template or refer to the surface cutout dimensions here before cutting a
hole in the furniture or other surface. Pay special attention to the direction the unit will face; the unit’s connector access side
is underlined. Extron is not responsible for miscut mounting holes.
Number / Signal type........... 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs
Connectors ....................... (1) 15-pin HD female
Nominal level .................... 0.7 Vp-p for RGB
Minimum / Maximum levels... Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain
Impedance........................ 75 ohms
Horizontal frequency............ 15 kHz to 135 kHz
Vertical frequency............... 30 Hz to 170 Hz
USA models
Top plate (outer rim) .............. 6.470" W x 5.125" D (16.43 cm W x 13.02 cm D)
Surface cutout (inside rim)....... 5.970 0.0325" W x 4.625 0.0325" D
(15.16 0.083 cm W x 11.75 0.083 cm D)
Top plate (inside tilt plate)........ 4.344" W x 3.000" D (11.03 cm W x 7.62 cm D)
Box (under surface)............... 4.0" H x 4.6" W (front of unit) x 4.4" D
(10.2 cm H x 11.7 cm W x 11.2 cm D) without clamps
4.0" H x 8.0" W (front of unit) x 4.4" D
video outPut
—
Hsa 200s
Number / Signal type........... 1 pass-through VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs
Connectors ....................... 5 BNC female on pigtails
(10.2 cm H x 20.3 cm W x 11.2 cm D) with clamps
International models
Top plate (outer rim) .............. 8.183" W x 6.375" D (20.79 cm W x 16.19 cm D)
Surface cutout (inside rim)....... 7.683 0.0325" W x 5.875 0.0325" D
(19.51 0.083 cm W x 14.92 0.083 cm D)
Top plate (inside tilt plate)........ 5.90" W x 4.10" D (14.99 cm W x 10.41 cm D)
Box (under surface)............... 4.0" H x 6.3" W (front of unit) x 5.0" D
(10.2 cm H x 15.9 cm W x 12.7 cm D) without clamps
4.0" H x 10.0" W (front of unit) x 5.0" D
(10.2 cm H x 25.3 cm W x 12.7 cm D) with clamps
Product weight
video outPut
—
Hsa 200se
Number / Signal type........... 1 VGA–UXGA RGBHV, RGBS, RGsB, RsGsBs
Connectors ....................... 5 BNC female on pigtails
Nominal level .................... 0.7 Vp-p for RGB
Minimum / Maximum levels... Analog: 0.3 V to 1.5 Vp-p
Impedance........................ 75 ohms
DC offset .......................... 5 mV with input at 0 offset
NOTE: Output resolution may vary depending on whether or not the Extender is attached to the computer at startup,
and also on the type of computer being used.
synC
—
Hsa 200se
HSA 200S.......................... 4.0 lbs (1.8 kg)
HSA 200SE ........................ 5.0 lbs (2.3 kg)
Shipping weight
HSA 200S.......................... 7 lbs (4 kg)
HSA 200SE ........................ 8 lbs (4 kg)
Vibration .......................... ISTA 1A in carton (International Safe Transit Association)
Listings, certification ........... UL, CUL, CSA C/US
Compliances
HSA 200SE ........................ CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF .............................. 30,000 hours
Input type......................... RGBHV, RGBS, RGsB, RsGsBs
Output type....................... RGBHV, RGBS, RGsB, RsGsBs
Input level ........................ 2.0 V to 5.0 Vp-p
Output level ...................... TTL: 5.0 Vp-p, unterminated
Input impedance ................ 510 ohms
Output impedance .............. 75 ohms
Max. propagation delay........ 18.8 ns
Max. Rise / Fall time............ 4 ns
Polarity ............................ Positive or negative (follows input)
audio
—
Hsa 200se
Warranty .......................... 3 years parts and labor
Gain................................ Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ............ 20 Hz to 20 kHz, 0.5 dB
NOTE: All nominal levels are at 10%. Specifications are subject to change without notice.
THD + Noise...................... 0.025% @ 1 kHz, 0.020% @ 20 kHz at nominal level
S/N................................. >90 dB at rated maximum output (21 dB, balanced)
Stereo channel separation .... >75 dB @ 20 Hz to 20 kHz
audio inPut — Hsa 200s
Number / Signal type........... 1 stereo, unbalanced
Connectors ....................... (1) 3.5 mm stereo female jack
audio inPut — Hsa 200se
Number / Signal type........... 1 stereo, unbalanced
Connectors ....................... (1) 3.5 mm stereo female jack
Impedance........................ >10k ohms unbalanced, DC coupled
Nominal level .................... -10 dBV (316 mVrms)
Maximum level .................. +6 dBu, (balanced or unbalanced) at 1% THD+N
NOTE: 0 dBu = 0.775 Vrms. 0 dBV = 1 Vrms. 0 dBV ≈ 2 dBu.
audio outPut — Hsa 200s
Number / Signal type........... 1 pass-through stereo, unbalanced
Connectors ....................... (1) 3.5 mm, direct insertion captive screw connector, 3 pole
audio outPut — Hsa 200se
Number / Signal type........... 1 stereo, balanced/unbalanced
Connectors ....................... (1) 3.5 mm direct insertion captive screw connector, 5 pole
Impedance........................ 50 ohms unbalanced, 100 ohms balanced
Nominal level .................... Unbalanced output: -10 dBV (316 mVrms)
Balanced output: -2 dBu (632 mVrms)
Maximum level (Hi-Z) ........... >+14 dBu, balanced at 1% THD+N
Maximum level (600 ohm) ..... >+5.5 dBm, balanced at 1% THD+N
146
USA West
USA East
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
|