X4544
Please keep these instructions for future reference,
as they contain important information.
Requires three “AA” batteries (included).
Batteries included are for demonstration purposes only.
Adult assembly required for battery replacement and set-up. Tools required:
Phillips screwdriver and slotted screwdriver (or coin). Tools not included.
This toy is compatible with iPhone® 3GS,
iPhone 4/4S and iPod Touch® 4th Generation. Device not included.
This toy is surface washable only. Do not immerse.
fisher-price.com
Battery
Replacement
Battery Safety
Information
1,5V x 3
"AA" (LR6)
In exceptional circumstances, batteries
may leak fluids that can cause
a chemical burn injury or ruin your
product. To avoid battery leakage:
• Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
For best performance, we recommend
replacing the batteries that came with
this toy with three, new “AA” (LR6)
alkaline batteries.
• Open the fasteners on the back of the toy.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Loosen the screws in the sound box
battery compartment door with
a Phillips screwdriver. Remove the
door. Remove the exhausted batteries
and dispose of them properly.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Insert three, new “AA” (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws. Do not
over-tighten.
• Close the fasteners on the back of the toy.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
• If this toy begins to operate erratically,
you may need to reset the electronics.
Slide the power/volume switch off and
back on.
• When sounds from this toy become
faint or stop, it’s time for an adult to
change the batteries.
• Protect the environment by
not disposing of this product
with household waste
(2002/96/EC). Check your
local authority for recycling
advice and facilities.
3
10+ Songs, Tunes & Phrases
Power/Volume
Switch
• Open the fasteners on the back of
the toy.
• Press the monkey’s hands or feet to
hear fun songs and phrases!
• Slide the power/volume switch to ON
with low volume or ON with high
volume . Close the fasteners on the
back of the toy.
4
Insert Your Apple Device
• Download our free Fisher-Price® Monkey
SM
app from the App Store (no purchase
necessary!) for interactive fun!
• When used with your iPod or iPhone
device, make sure it is properly
inserted and locked in the toy. Remove
any other case from the device before
inserting it in this toy.
• Turn your device power ON and open
the Fisher-Price® Monkey app.
2
• Lift the door slightly and then slide to
remove it from the device compartment.
Hint: If you’d like to block your child
from pressing the home button, follow
the instructions in this step.
Home
Button
Latch
1
• Turn the latch to unlock the door.
3
• Insert the device with the home button
towards the monkey’s feet.
5
Insert Your Apple Device
Hint: If you’d like to allow your child
to press the home button, follow the
instructions in this step.
Home
Button
5
• Fit the tabs on the door into the slots in
the monkey.
4
• Insert the device with the home button
toward the monkey’s arms.
6
• Squeeze the door closed to lock in place.
• Check to be sure the door is closed
and the latch is in the locked position.
6
Interactive Fun!
• Press the monkey’s hands and feet to
interact with the app!
Tips:
• Make sure toy power is ON to interact
with the app on your device.
• When this toy is used with your Apple
device, volume is controlled by your
device. Adjust the volume level on
your device.
• When you are finished playing with
this toy, slide the power/volume
switch OFF . The power/volume
switch is on the sound box. Open
the fasteners on the back of the toy
to locate the switch.
7
Consumer Information
ICES-003
• This Class B digital apparatus
complies with Canadian ICES-003.
• Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference and (2) this
device must accept any interference
received, including interference that
may cause undesired operation.
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
NMB-003
• Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada.
• L’utilisation de ce dispositif est
autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.
• Reorient or relocate the
receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void
the user’s authority to operate the
equipment. This device complies with
Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful
interference and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
8
|