Clean-up
Peg
Supersize Sandbox
Instructions
Elastic Loop
Model 75967
• Cover the sandbox to help keep water and dirt out of the sandbox.
• Spread the cover over the top of the sandbox.
• Fasten the elastic loops on the cover to the pegs on the side of the sandbox.
Helpful Hint: Place a sand pail upside-down (or similar object) in the center of the sandbox
before putting on the cover. This will help to keep water off of the top of the cover.
Care
• Check the plastic parts regularly and if broken or cracked, dispose of them properly.
• Use a mild soap and water solution and clean cloth to clean this product. Rinse with
clean water to remove soap residue.
Storage
Base
Tabs
Tabs
• Please save these instructions for future reference.
• Adult assembly is required.
• No tools are needed for assembly.
• If you experience a problem with this product, or are missing a
part, please call us at 1-800-432-KIDS, rather than return this
product to the store.
Bottom View of Sandbox
• This product holds up to 500 lbs. of sand (not included).
• Remove sand from the sandbox.
• Turn the sandbox upside-down.
• Push the tabs outward on the bottom of the base to remove the cap.
Separate the panels.
• Store all parts indoors when the outdoor temperature drops below freezing.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
©1999 Mattel, Inc. All Rights Reserved.
Printed in U.S.A.
75967 0920
® and ™ designate U.S. trademarks of Mattel, Inc.
A
|