Microwave
CPBM189KFꢀ
30" Over-The-Range
Product Dimensions
Height
Width
Depth
17-1/16"
29-29/32"
16-3/4"
More Easy-To-Use Features
One-Touch Keep Warm Setting
Keep food warm until everything—and
everyone—is ready.
Real Stainless Steel
Real stainless steel with a protective
coating that reduces fingerprints and
smudges so it's easy to clean.
Sensor Cooking
Microwave automatically adjusts power
levels and cooking times to perfectly cook
a variety of items, effortlessly.
One-Touch Add 30 Seconds
Available in:
Stainless
(F)
Signature Features
Effortless™ Reheat
Reheat almost anything at the touch
of a button.
SpaceWise® Rack
Our SpaceWise® Rack creates more
room so you can cook two dishes at
once.
Over 40 Options
One-Touch Options
Versatile settings include: chicken
nuggets, soften ice cream, melt butter
and multiple snack options.
Our microwaves feature easy-to-use
one-touch buttons so you can cook
chicken nuggets, baked potatoes or
popcorn with the touch of a button.
frigidaire.ca
Microwave
CPBM189KF 30" Over-The-Range
13
17 1/16
16 ¾"
Microwave Specifications
Ducted Option Specifications
•
•
•
•
•
Product Shipping Weight (approx.) – 69 Lbs.
Voltage Rating – 120Vꢀ/ꢀ60 Hzꢀ/ꢀ15 Amps
Connected Load (kW Rating) @ 120 Volts = 1.65ꢀkW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
For outside ventilation.
Exhaust duct adapter will be needed for outside ventilation, to mate
with standard 3-1/4"ꢀxꢀ10" rectangular duct. If round duct required,
rectangular-to-round transition adapter will be needed with no less
than 6" diameter.
For most efficient airflow exhaust, use a straight run or as few elbows
as possible with a maximum duct length of 3-1/4"ꢀxꢀ10" rectangular or
6" diameter round duct, not to exceed 140 equivalent feet.
For horizontal installation, be sure to allow enough space between
wall studs to accommodate exhaust.
Refer to installation instructions on web for detailed duct
preparation and converting exhaust vent blower system for exterior
exhaust ventilation.
•
•
•
•
Amps @ 120 Volts = 14.3 Amps
Always consult local and national electric codes.
•
•
Grounded outlet should be located in cabinet above, with hole in base
to route power cord. Carefully follow top template instructions for
power cord clearance when installing beneath smooth, flat cabinets.
Microwave’s exhaust ventilation system is preset to recirculate air
inside with no ducting system required. Exhausting air outside is
optional, using either vertical or horizontal ducting system. (Refer to
Ducted Option Specifications for outside ventilation.)
For safe and proper installation, microwave MUST be mounted to
BOTH a top cabinet AND a wall, and connected to at least one wall
stud. Can NOT be installed in island or peninsula cabinet arrangements.
Cabinet bottom MUST be level to insure proper installation.
Cabinet MUST be capable of supporting a total load of 110 lbs.
•
•
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.ca for detailed instructions.
Optional Accessories
•
36" Stainless Steel Filler Panel Kit – (PN # MWFILKTSS).
•
•
•
Filler blocks recommended for installation when cabinet front hangs
below recessed bottom shelf.
•
Minimum distance of 30" required from cooking surface to bottom
edge of top cabinet.
•
•
Minimum distance of 66" required from floor to top of microwave.
Opening between cabinets MUST be 30" wide and free of obstructions.
For openings up to 36" wide, order optional 36" Filler Panel Kit to fill
in gap between unit and cabinets.
•
Allow 26" minimum clearance for 90° door swing.
Accessories information available
on the web at frigidaire.ca
•
•
•
•
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 frigidaire.ca
Specifications subject to change.
CPBM189K 06/11 © 2011 Electrolux Major Appliances, NA
Printed in Canada
|