Fujitsu Printer FTP 632MCL101 User Manual

24V DRIVE, 2-COLOR THERMAL PRINTER  
3" TYPE MECHANISM  
FTP-632MCL101/102/353/354  
OVERVIEW  
New 2-color printer (blue/black or red/black) joins FTP-602  
Series. The series consists of 24V battery drive compact thermal  
printers which can print at high speed.  
This series is suitable as built-in printer for a variety of  
applications, such as portable terminals, POS terminals, ticket  
machines, coupon machines, label printers, banking machines,  
measuring devices, medical equipment, etc.  
HIGHLIGHTS  
FTP-632MCL101  
• 2 Color printing  
It can print 2 colors: blue/ black or red/black  
• High speed printing  
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu  
Components' unique head drive control (at monochromatic  
printing).  
Speed of 2-color printing:  
- blue and red: 80 mm/s (460  
dotlines/s) maximum  
- monochromatic print: 40mm/s  
maximum  
• Auto Cutter  
Printer with auto cutter (full cut/ partial cut) is available.  
FTP-632MCL353  
• Paper auto loading function  
Thermal paper can be loaded without head-up lever  
operation.  
• Easy head access  
It is designed for easy head cleaning and head replace-  
ment.  
• Two paper paths  
Front and bottom paper insertion is available.  
FTP-622DCL/DSL4xx  
1
 
FTP-632MCL101/102/353/354  
(Continued)  
Part number  
Item  
Specifications  
FTP-632MCL101/102  
FTP-632MCL353/354  
24 VDC ±5% 2.3A  
(24V Rav1500, 25%printing ratio)  
For head  
For printer motor  
For cutter motor  
For logic  
24VDC±5% 1A maximum  
Power  
supply  
---  
24VDC±5% 1A maximum  
5VDC±5% 0.5 A maximum  
Printer Mechanism  
Mechanism with cutter  
Interface board  
Printer Mechanism  
Mechanism with cutter  
Head  
108 (W) × 48 (D) × 20 (H) mm  
---  
Dimensions  
---  
117 (W) × 57 (D) × 38 (H) mm  
131 (W) × 89 (D) × 24 (H) mm  
Weight  
Life  
Approximately 94g  
---  
---  
Approximately 340g  
Pulse durability: 1 × 108 pulse/dot (using Fujitsu Components' standard  
driving method)  
Wear resistance: 50 km (at 25% print ratio)  
Cutter  
----  
500,000 times minimum  
Operating temperature  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
Paper out/Mark detect  
Head release  
+5 to +40°C (Guarantee, but can operate between 0°C to +50°C)  
20 to 85% RH (no condensation)  
–20 to +60°C (excluding paper)  
5 to 95% RH (no condensation)  
By thermistor  
Environmental  
conditions  
Detection  
By photointerrupter  
By slide switch  
2 color paper (blue/black) PB770 (Mitsubishi paper)  
(red/black) PB670 (Mitsubishi paper)  
Recommended  
thermal sensitive  
paper  
High sensitivity paper  
Standard paper  
TF50KS-E4 (Nippon paper)  
TF60KS-E (Nippon paper), FTP-030P0104(80mm)  
PD150R (Oji paper), FTP-030P0701(80mm)  
Medium term paper  
TP60KS-F1 (Nippon paper), FTP-030P0102(80mm)  
PD170R (Oji paper)  
P220VBB-1 (Mitsubishi paper)  
PD160R-N (Oji paper)  
Long term paper  
AFP-235 (Mitsubishi paper)  
TP50KJ-R (Nippon paper)  
HA220AA (Nippon paper)  
3
 
FTP-632MCL101/102/353/354  
FUNCTION  
ITEM  
ITEM  
Motor power save  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Test printing  
8.  
9.  
Paper-out detection  
Mark detection  
Paper near end detection  
10.  
11.  
12.  
13.  
MCU trouble detection  
Power on/off sequence protection  
Motor protection  
Head-up detection  
Abnormal temp. of thermal head detection  
Blown fuse detection  
Hardware timer  
Abnormal voltage detection of head  
DIMENSIONS  
1. Printer mechanism  
FTP-632MCL101/102  
20.1  
CENTER OF PAPER  
CAUTION  
HOT  
76.8(POSITIONING HOLE)  
50.9  
57.0  
Unit: mm  
(107.9)  
2. Printer mechanism with cutter  
0.5  
37.2  
13.3  
MCL353  
Å B ¢ ≥ Ç ∫ ≈ Ç ¢ â » Ç Á Ç Ç ê G … Ç  
MCL354  
3
00  
(116.9)  
Å} 1  
59.9  
57.0  
(73.1)  
FTJAPAN  
Unit: mm  
4
 
FTP-632MCL101/102/353/354  
Interface board  
105.4  
87.6  
41.8  
21.8  
2
1
CN9  
1
1
9
CN5  
CN3  
30 29  
1
2
1
CN1  
CN8  
CN7  
1
4
4
1
33.2  
86.4  
105.4  
120.7  
5.1  
4-Ø3.6 ±0.1  
5.1  
Height of devices side  
Height of solder side  
Unit: mm  
5
 
FTP-632MCL101/102/353/354  
CONNECTOR FOR THERMAL HEAD  
1. Thermal Head  
Head side : IL-FPC-28CLIP (JAE)  
Board side : 52045 (Molex) or equivalent  
*1: Symbol: " " means a negative logic signal  
Thermal head heat sink  
Motor  
Head up level  
1, 2, 3, ......................................15, 16  
Connector Pin No.  
2. Motor connectors  
Motor side : PHR-4 (J.S.T.) or equivalent  
Board side : B4B-PH-K-S (J.S.T.) or equivalent  
No. Signal Comment  
No. Signal Comment  
1
2
3
4
5
VSEN Power for paper sensor  
PHE Photo interrupter emittor  
PHK Photo interrupter cathode  
SW1 Head up detect switch 1  
SW2 Head up detect switch 2  
1
2
3
4
B
B
A
A
Pulse motor driving B  
Pulse motor driving B  
Pulse motor driving A  
Pulse motor driving A  
6
 
FTP-632MCL101/102/353/354  
3. Cutter  
Mech side : EHR-4 (J.S.T.) or equivalent  
Board side : B4B-EH (J.S.T.) or equivalent  
No Cable Color  
Name  
1
2
3
4
White  
White  
Red  
Home position 1  
Home position 2  
Motor energizing signal M+  
Motor energizing signal M-  
Black  
FUNCTION  
ITEM  
ITEM  
Cutter trouble detection  
Motor power save  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Test printing  
8.  
9.  
Paper-out detection  
Paper near end detection  
Head-up detection  
10.  
11.  
12.  
13.  
14.  
Mark detection  
MCU trouble detection  
Power on/off sequence protection  
Motor protection  
Abnormal temp. of thermal head detection  
Blown fuse detection  
Abnormal voltage detection of head  
Hardware timer  
INTERFACE, COMMAND, OPTIONS  
Please refer to the FTP-622DCL4xx DATA SHEET and the FTP-622DCL4xx DATA SHEET for Interface,  
Command, and Options.  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
2132 WV Hoofddorp  
Netherlands  
Fujitsu Component Limited  
Gotanda-Chuo Building  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Fujitsu Components  
International  
Headquarter  
Offices  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 6375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 6273-3021  
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 06/22/2004.  
7
 

Edimax Technology Security Camera IC 9000 User Manual
First Alert Home Security System DWB 700 User Manual
Fisher Price Baby Toy W9510 User Manual
FujiFilm Printer NC 400D User Manual
Fujitsu Laptop V3525 User Manual
Fujitsu Scanner S510M User Manual
Fundex Games Board Games Sting User Manual
Gemini Musical Instrument PDM 01 User Manual
Generac Portable Generator 005802 0 User Manual
GE Washer S2200 User Manual