BATTERY DRIVE, FTP-604 Series
3” TYPE MECHANISM AND INTERFACE BOARD
FTP-634MCL001/002/FTP-624DCL/DSL002
■ OVERVIEW
FTP-634MCL/FTP-624DCL/DSL Series is a high speed line
thermal printer driven by battery, printing on 3-inch wide paper
(80 mm/ 85 mm).
The printer is compact and lightweight, and the design allows
easy
head maintenance, head cleaning and head
replacement.
This printer is suitable for a variety of applications, such as
hand held terminals, POS terminals, ticket machines, coupon
machines, label printers, etc.
FTP-634MCL001
■ HIGHLIGHTS
• High speed printing
It can print at 50 mm/s (400 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.
• Compact and lightweight
This printer has a low profile of only 20 mm, and a light
weight of approximately 95g.
FTP-624CU102
• Low power consumption
The peak current for head drive is only 3.5 A (8.5 VDC, 128
dots on).
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• UL recognized
File No. E171434
FTP-624DCL/DSL002
1
FTP-634MCL001/002/FTP-624DCL/DSL002
(Continued)
Item
For head
Specifications
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on)
Power
supply
Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
Peak current: approximately 0.8 A (conditions: room temperature, 7.2VDC)
For motor
For logic
Voltage: 5 V DC± 5%
Current: 0.2 A maximum
Mechanism
108 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter)
131 (W) × 89(D) × 24 (H) mm
Dimensions
Interface board
Weight (Mechanism)
approximately 95 g
Expected life
Mechanism
Pulse durability: 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Wear resistance: 50 km (at 12.5% print ratio)
Operating temperature
0 to +50°C*2
Environmental
conditions
Operating humidity
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head-up
20 to 85% RH (no condensation)
–20 to +60°C
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter
Detection
By microswitch
For front insertion use (80 mm width) : FTP-030PU001
For rear insertion use (85 mm width) : FTP-030P0020, FTP-030PG106
In Europe (80 mm width)
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
: FTP031P0060-45
Recommended thermal sensitive paper
: PD160R, PD170R, PD150R
: TF50KS-E4, TF60KS-E, TF50KS-E
: P220VBB-1, AFP-235
*1: There may be exceptions.
*2: Guarantee +5°C to +40°C.
3
FTP-634MCL001/002/FTP-624DCL/DSL002
■ DIMENSIONS
Printer mechanism
PAPER INSERTION
(MCLOO1)
20.1
HEAD UP LEVER (AT HEAD DOWN)
CENTER OF PAPER
PAPER INSERTION
(MCLOO2)
HEAD CONNECTOR
50.9
57.0±1
(107.9)
Unit: mm
4
FTP-634MCL001/002/FTP-624DCL/DSL002
Interface board
130.8
120.7
105.4
71.1
33.0
5.1
5.1
15.2
CN5
CN12
CN9
CN10
CN11
59.7
CN2
CN1
CN4
5.1
5.1
73.7
4-03.6
86.4
105.4
114.2
120.7
Mounting Height
Mounting Height
* CN9 on FTP-624DSL only
** CN8, CN11, CN12 not used
Unit: mm
5
FTP-634MCL001/002/FTP-624DCL/DSL002
■ CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM
1. Thermal Head
Head side 1: B11B-PH-K-S-2.2 (J.S.T.) or equivalent
2: B10B-PH-K-S-2.2 (J.S.T.) or equivalent
Board side 1: PHR-11 (J.S.T.) or equivalent
2: PHR-12 (J.S.T.) or equivalent
Connector Thermal Head 1
No. Signal Comment
Connector Thermal Head 2
No. Signal Comment
1
2
STB5 Print enable signal 5
STB6 Print enable signal 6
STB7 Print enable signal 7
STB8 Print enable signal 8
1
2
VH
VH
Power for head
Power for head
3
3
GND Head ground
GND Head ground
4
4
5
CLK
LAT
DIN
Data transmission clock
Print data latching signal
Print data output signal
5
TH*1
Temperature detection
6
6
STB1 Print enable signal 1
STB2 Print enable signal 2
STB3 Print enable signal 3
STB4 Print enable signal 4
VDD Power for logic
7
7
8
GND Head ground
GND Head ground
8
9
9
10
11
VH
VH
Power for head
Power for head
10
*1: Symbol: " " means a negative logic signal
Thermal head heat sink
Head up level
Motor
1, 2, 3, ...............9, 10
1, 2, 3, ...............10, 11
Connector Pin No.
3. Sensor connectors
Sensor
: PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
6
FTP-634MCL001/002/FTP-624DCL/DSL002
■ FUNCTION
Item
Item
1.
2.
3.
4.
5.
6.
7.
Test print function
8.
9.
Motor power saving function
Mark detection function
Paper out detection
Paper near end detection
10. MCU operation abnormality detection
11. Power ON/OFF sequence protection
12. Motor over-current protection
13. Hardware timer
Head up detection
Thermal head temperature abnormality detection
Blow-out fuse detection
Head voltage abnormality detection
■ INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-624DCL/DSL DATA SHEET.
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
Fujitsu Component Limited
Gotanda-Chuo Building
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Fujitsu Components
International
Headquarter
Offices
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 06/2002
7
|