24V dRiVEN, FTP-607 Series
3” HigH SPEEd THERMAL PRiNTER
FTP-637MCL401/601
n Overview
The FTP-637 MCL Series are 24V driven high-speed printers
with a ultra low profile auto cutter and long life.
The FTP-637 MCL Series can be used for a variety of
applications, such as POS terminals, ticket vending machines,
label printers, banking terminals, and measurement and
medical equipment.
n HiGHLiGHTS
FTP-637MCL401/601
• Ultra low profile
Height 21.8 mm, width 103.2/104.5 mm, depth 42.2 mm
• High speed printing
It can print at 100/150 mm/s maximum by using Fujitsu's
unique head drive control.
• Auto Cutter
Long life and high reliable guilotine with dedicated motor.
• Easy paper setting
Our lever platen release mechanism allows a
wide paper route, so paper can be easily inserted.
Conventional auto loading is also available.
FTP-637DSL291
• Multifunctional die-cast frame
Wide operating temperature range, long continuous
printing, high ESD absorbtion and discharge of static
electricity vibration and shock resistant.
• RoHS compliant
FTP-637DSL611R
ꢀ
FTP-637MCL401/601
n SPECiFiCATiONS
Item
Specification
Interface
Conforms to RS232C/Centronics
Power
For print
head
MCL401
MCL601
24 VDC average current, 0.7A (1.3A peak)
24 VDC average current, 1.3A (2.5 A peak)
(print ratio: 12.5%, print speed 100mm/sec.)
24 VDC ±5%, 1.0 A maximum
supply
For motor
For cutter
MCL401
MCL601
24 VDC ±5%, 1.1 A maximum
24 VDC ±5%, 1.3 A maximum
For logic
3.3 to 5.25 VDC, 0.2 A maximum
Dimensions Mechanism with cutter
104.5 x 42.2 x 21.8 mm (WxDxH)
Interface
board
DSL291
DSL6xx
70 x 60 x 12 mm (WxDxH)
95 x 70 x 21.6 mm (WxDxH)
Weight
Mechanism with cutter
Interface board
Approximately 118g/122g
Approximately 50g / 50g
Life
Head
MCL401
MCL601
MCL401
MCL601
MCL401
MCL601
Pulse durability: 50 million pulses/dot (print ratio: 12.5% or less).
Pulse durability: 100 million pulses/dot (print ratio: 12.5% or less).
Abrasion resistance:
Abrasion resistance:
500,000 cuts
paper traveling distance 50km
paper feed length 100km.
Cutter
Platen
1,000,000 cuts
5,000 times (open/close)
Operating
Operating temperature* 0ºC to +50ºC
environment
Operating humidity
Storage temperature
Storage humidity
Head temperature
detection
20 to 85% RH (no condensation)
-20ºC to +60ºC (paper not included)
5 to 95% RH (no condensation)
Detected by thermistor
Detection
function
Paper out/mark
detection
Detected by photo-interruptor
Detected by sliding switch
Platen release
Recommended thermal sensitive paper High sensitive paper
TF50KS-E4 (Nippon paper)
TF60KS-E (Nippon paper),
FTP-020PU001 (58mm)
PD150R (Oji paper)
Standard paper
FTP-020PU701 (58mm)
TF60KS-F1 (Nippon paper)
FTP-020P0102 (58mm)
PD170R (Oji paper)
Medium life paper
Long life paper
P220VBB-1 (Mitsubishi paper)
PD160R (Oji paper)
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
*+5˚C to +40˚C printing density assurance rance.
3
FTP-637MCL401/601
n FUNCTiON OF iNTERFACE bOARd
Item
Item
1.
2.
3.
4.
5.
Test print function
8.
Cutter trouble detect
Paper out detection
Paper near end detection
Paten open detection
9.
Motor power saving function
Mark detection function
10.
11.
12.
MCU operation abnormality detection
Power ON/OFF sequence protection
Thermal head temperature abnormality
detection
6.
7.
Blow-out fuse detection
13.
14.
Motor over-current protection
Hardware timer
Head voltage abnormality detection
n diMENSiONS
1. Printer mechanism
FTP-637MCL401/601
Center of paper
90.4
36.0
7.5
Center of mechanism
10.7
21.8
103.2 / 104.5
55
ꢀꢀdegrees
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
4
FTP-637MCL401/601
1. Connector (FPC) specification (CN4)
(1) Connector
Mechanical unit side:
Remote side (housing site):
FPC connector
52610-3071 (made by Molex)
(2) Pin assignment on the mechanical side
No
1
Signal
PHK
I/O Contents
—
I
Photointerrupter (Cathode)
2
VSEN
PHE
VH
Ground power supply for paper sensor
Photointerrupter (Emittor)
Head drive power
Head drive power
Head drive power
Data input
3
O
I
4
5
VH
I
6
VH
I
7
DI
I
8
STB3
STB4
I
Strobe 3
9
I
Strobe 4
10 VDD
11 GND
12 GND
13 GND
14 GND
15 GND
16 GND
17 TM
Logic Power
—
—
—
—
—
—
O
I
Head ground
Head ground
Head ground
Head drive power
Head drive power
Head drive power
Thermistor
18 STB1
19 STB2
20 LAT
21 CLK
22 VH
Strobe 1
I
Strobe 2
I
Data Latch
I
Clock
I
Head drive power
Head drive power
Head drive power
Platen open switch
Platen open switch
Motor excite signal A
Motor excite signal A
Motor excite signal B
Motor excite signal B
23 VH
I
24 VH
I
25 SW
26 SW
27 MT A
28 MT A
29 MT B
30 MT B
—
—
I
I
I
I
5
FTP-637MCL401/601
Sensor (Photo-
interruptor)
Platen unit
Thermal head
Motor
FPC
Connect terminal:
surface side
Connector No
30, 29, .....................2,1
(FPC pin numbers)
2. Cutter (CN5)
Connector on control circuit side: 52610-0871 Molex or equivalent
No. Signal I/O
Contents
No. Signal I/O
Contents
1
3
5
7
VSEN
PHK
I
Paper sensor power
Photo interruptor (cathode)
Motor excite signal A
Motor excite signal B
2
4
6
8
PHE
MT A
MT B
NC
O
I
Photo interruptor (emittor)
Motor excite signal A
Motor excite signal B
Not connected
MT A
MT B
I
I
I
—
Fujitsu Components international Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: [email protected]
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: [email protected]
Fax: (65) 6273-3021
Email: [email protected]
©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. November 6, 2008.
6
|