24v DRive, FTP-609 SeRieS
ULTRA HiGH SPeeD (200mm/s)
3" TYPe MeCHANiSM (Cutter option)
FTP-639MCL054/353/354-R
n OveRview
The FTP-609MCL Series thermal printer (driven by 24VDC)
provides ultra-high speed printing (200mm/s) for 2-inch and 3-
inch wide paper.
This series is suitable for a variety of applications, such as POS/
ECR, kiosk terminals, ticket machines, label printers, banking
machines, measuring devices, medical equipment, etc.
n HiGHLiGHTS
• Ultra high speed printing
It can print at 200 mm/s (ꢀ600 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.
FTP-6x9MCL054R with
FTP-629DCL014R
• Rear paper insertion with lock type
Fujitsu Components' unique platen release mechanism allows
straight paper path and easy head maintenance.
• Auto Cutter
Printer with auto cutter (full cut/ partial cut) is available. It can
be mounted on top of the mechanism.
• Multi-featuring diecast frame
By application of multi-featuring diecast frame, continous print
by function of heat-sink, high ESD with stand by function of
earth frame and shock/vibration resistance by function of solid
frame are valid.
• Compact size
Depth: 40.5mm, width: ꢀ04.2mm, height: 20.5mm
• High resolution
8 dots/mm head provides clear print out.
• RoHS compliant
ꢀ
FTP-639MCL054/353/354-R
Item
Specifications
Part number
FTP-639MCL054R
FTP-639MCL353/354-R
For head
24 VDC ±5% ꢀ.9A (4A, )(24V , 25% printing ratio)
Power
supply
For printer motor
For cutter motor
For logic
24VDC±5% ꢀA maximum
---
24VDC±5% ꢀ.2A maximum
5VDC±5% 0.2 A maximum
ꢀ04.2 × 40.2 × 20.5mm
Printer Mechanism
---
Dimensions
W x D x H
Printer Mechanism with cutter ---
ꢀ09.7 × 62.5 × 37.7mm
Interface board (standard) 70 × 60 × 24 mm
Interface board (med speed) 95.ꢀ x 73.6 x ꢀ8.6mm
Interface board (hi speed)
Printer Mechanism
77 x 50 x 2ꢀ.5mm
Weight
Approximately ꢀ25g
---
Printer Mechanism with cutter ---
Approximately 320g
Interface board (standard) Approximately 30g
Interface board (med speed) Approximately 45g
Interface board (hi speed)
Head
Approximately 22g
8
Life
Pulse durability: ꢀ × ꢀ0 pulse/dot (using Fujitsu Components' standard driving method)
Wear resistance: ꢀ00 km (at ꢀ2.5% print ratio)
Cutter
---
500,000 cuts
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head release
-25°C to +70°C (Guarantee)
20 to 85% RH (no condensation)
–40°C to +85°C (excluding paper)
5 to 95% RH (no condensation)
By thermistor
-10˚C to +55°C (Guarantee)
Environmental
conditions
–20°C to +60°C
Detection
By photointerrupter
By slide switch
Cutter position
By microswitch (inside cutter)
TF50KS-E4 (Nippon paper)
High sensitivity paper
Standard paper
Recommended
thermal sensitive
paper
TF60KS-E (Nippon paper), FTP-030P0ꢀ04 (80mm),
PDꢀ50R (Oji paper), FTP-030P070ꢀ (80mm)
Medium term paper
TP60KS-Fꢀ (Nippon paper), FTP-030P0ꢀ02(80mm),
PDꢀ70R (Oji paper)
P220VBB-ꢀ (Mitsubishi paper)
PDꢀ60R-N (Oji paper)
Long term paper
Label paper
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
HW54T (Nippon paper)
3
FTP-639MCL054/353/354-R
n FUNCTiON
ITEM
ITEM
Cutter trouble detection
Motor power save
ꢀ.
2.
3.
4.
5.
6.
7.
Test printing
8.
9.
Paper-out detection
Paper near end detection
ꢀ0.
ꢀꢀ.
ꢀ2.
ꢀ3.
ꢀ4.
Mark detection
Head-up detection
MCU trouble detection
Power on/off sequence protection
Motor protection
Abnormal temp. of thermal head detection
Blown fuse detection
Abnormal voltage detection of head
Hardware timer
n DiMeNSiONS
1. Printer mechanism
FTP-639MCL054R
Platen open lever
Center of platen
(paper end sensor)
Unit: mm
4
FTP-639MCL054/353/354-R
Printer with cutter
FTP-639MCL353/354-R
29.9
23.0
Paper Path
25.5
Max2.5
28.5
Center of Platen
Center of Paper
ꢀ5.5
34.0
(57.5)
3.0
F.T
JAPAN FUJITSU
24.3
S
Notes: ꢀ. Nominal value (Tolerance +0.5, -0.5)
Unit: mm
2. S is the base line of installing (Tolerance +0.5, -0.5)
5
FTP-639MCL054/353/354-R
interface board - FTP-629DCL/DSL0xx-R
4ꢀ.0
ꢀ
ꢀ2.6
ꢀ0
ꢀ
30
CN3
CN4
CN8
CN5
CNꢀ
CN7
6
CN6
CN2
ꢀ
3
ꢀ
ꢀ
8
ꢀ7.5
35.5
5ꢀ.0
63.5
3.3
Unit: mm
Connectors on Control board - FTP-629DCL/DSL0xx-R
No.
CN1
CN2
CN3
CN4
CN5
CN6
CN7
CN8
Name
Function
Centro I/F Connector
RS-232C I/F Connector
Thermal Head Connector
Printer Motor Connector
Cutter Connector
Connection for Centronics Interface
Connection for RS-232C Interfac e
Connection for Thermal Head (FPC)
Connection for Printer Motor (FPC)
Connection for Paper Cutter
Logic Power Connector
Head Motor Power Connector
Near End Sensor Connector
Connection for +5V Power Supply
Connection for +24V Power Supply
Connection for Near End Sensor
6
FTP-639MCL054/353/354-R
3. interface board - FTP-629DCL/DSL100-R Series
4ꢀ.0
ꢀ3.5
ꢀ.5
CN5
CN6
CN7
4.6
CNꢀ0
2.5
CN4
CN3
2.0
ꢀ.0
CN8
CN9
ꢀ.0
ꢀ.5
CN2
CNꢀ
CNꢀ2
CNꢀ3
CNꢀꢀ
9.0
ꢀ8.0
30.0
48.0
64.0
3.3
6.3
Unit: mm
Connectors on Control board - FTP-629DSL100-R Series
No.
CN1
CN2
CN3
CN4
CN5
CN6
CN7
CN8
CN9
Name
Function
Remark
Centro I/F Connector
RS-232C I/F Connector
USB I/F Connector
Power Connector
Connection for Centronics Interface
Connection for RS-232C Interfac e
Connection for USB Interface
Connection for +24V Power Supply
Connection for Thermal Head (FPC)
Connection for Printer Motor (FPC)
Thermal Head Connector
Printer Motor Connector
Head/Motor Connector
Cutter Connector
*1
*1
Connection for Thermal Head/Printer Motor *1
Connection for Paper Cutter
Conveyance Motor Connector
Connection for Conveyance Motor
Connection for Near End Sensor
CN10 Near End Sensor Connector
CN12 Mecha-Tilte/Mark Sensor Connector Connection for Mecha-Tilte/Mark Sensor
CN13 Conveyance Motor Connector Connection for Conveyance Motor
*ꢀ: When CN5 and CN6 are mounted, CN7 is not mounted. When CN7 is mounted, CN5 and CN6 are not
mounted.
7
FTP-639MCL054/353/354-R
interface boards for FTP-629DSL300-R Series
■
exTeRNAL DiMeNSiON SPeCiFiCATiONS
external Dimension Chart of the Control board
1.
56.705
28.702
13.653
8
8
3
3
CN2
CN5
CN1
9
1
1
1
1.285
CN8
1.448
CN6
CN7
10
30
1
1
3
3
8
8
Ø 3.3 NTH rand Ø 6.0
27.95
27.5
55.45
Part side H=15 mm (max.)
Substrate t=1.2 mm
Solder side H=5 mm (max.)
Unit: mm
2.
Connector Types on Control board
No. Name
Function
Remarks
CNꢀ Power connector
To connect +24V and +5V power supply
-
CN2 Connector for RS-232C interface control To connect RS-232C interface and control depends on models
signal connection
signal
CN3 Near end switch connector
CN4 Reserved connector
CN5 USB interface connector
CN6 Head connector
To connect Near End detection switch
-
-
To connect USB interfaces
To connect the head
To connect the transport
depends on models
CN7 Transport motor connector
CN8 Cutter connector
To connect the cutter
depends on models
8
FTP-639MCL054/353/354-R
n CONNeCTOR PiN ASSiGNMeNT OF PRiNTeR MeCHANiSM (FPC)
1. Thermal head control circuit side
Part number
: 526ꢀ0-3090 (Molex) or equivalent
No
Signal
SW
I/ O
Contents
Platen open switch
Power for thermal head
Power for thermal head
Data in
No Signal I/ O
Contents
Platen open switch
Power for thermal head
Power for thermal head
Print enable 3
1
3
O
-
2
4
SW
VH
-
-
VH
5
VH
-
6
VH
-
7
DI
I
8
STB3
VDD
GND
GND
GND
GND
GND
STB1
LAT
DO
I
9
STB4
TM
I
Print enable 4
Head Thermistor
Head GND
10
12
14
16
18
20
22
24
26
-
Power for logic
Head GND
11
13
15
17
19
21
23
25
27
29
-
-
GND
GND
GND
GND
TH
-
-
Head GND
-
Head GND
-
Head GND
-
Head GND
-
Head GND
-
Head GND
-
Head GND
O
I
Thermistor
I
Print enable 1
STB2
CLK
VH
Print enable 2
Clock
I
Print data latch
Data out
I
O
-
-
Power for thermal head 28
Power for thermal head 30
VH
Power for thermal head
Power for thermal head
VH
-
VH
-
2. Motor, Sensor
Connector on circuit side
: 526ꢀ0-ꢀ090 (Molex) or equivalent
No. Signal I/O Contents
No. Signal I/O Contents
1
3
5
7
9
NC
-
-
Not connected
2
4
6
8
TM
O
Motor temperature sensor
TM
Motor temperature sensor
MT/A
MT/B
PHK
I/O Motor coil excitation /A
I/O Motor coil excitation /B
MTA
MTB
VSEN
I/O Motor coil excitation A
I/O Motor coil excitation B
-
Paper out sensor cathode
Paper out sensor emittor
-
Power for paper sensor
10 PHE
O
3. Cutter
Connector type:
B4B-PH (J.S.T.) or equivalent
No. Signal I/ O Contents
No. Signal I/ O Contents
1
3
SW1
M+
O
Cutter home position switch
2
4
SW2
M-
O
Cutter home position switch
I/O Cutter motor drive
I/O Cutter motor drive
n iNTeRFACe COMMAND OPTiONS
Please refer to the FTP-629DCL/DSL or FTP-629DCL/DSLꢀ00/300 datasheet series datasheet.
9
FTP-639MCL054/353/354-R
Fujitsu Components International Headquarter Offices
Japan
europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo ꢀ4ꢀ, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2ꢀ32 WV Hoofddorp
Netherlands
Tel: (8ꢀ-3) 5449-70ꢀ0
Tel: (3ꢀ-23) 55609ꢀ0
Fax: (8ꢀ-3) 5449-2626
Email: [email protected]
Fax: (3ꢀ-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (ꢀ-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
ꢀ02E Pasir Panjang Road
#0ꢀ-0ꢀ Citilink Warehouse Complex
Singapore ꢀꢀ8529
Fax: (ꢀ-408) 745-4970
Tel: (65) 6375-8560
Email: [email protected]
Fax: (65) 6273-302ꢀ
Email: [email protected]
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. April 24, 2007
ꢀ0
|