Fujitsu Tablet Accessory FMWSP6 User Manual

FMWSP6 Screen Protector  
Installation Instructions  
3. Install the screen protector. Apply the adhesive  
side to the screen with the notch in the lower left  
corner. Apply pressure along the edge of the  
screen protector with your finger. (Avoid lifting  
the screen protector from the screen after it is  
installed. The adhesive requires 48 hours to cure.)  
Stylistic 2300  
The FMWSP6 screen protector can be installed on  
the Stylistic 2300 pen tablet display screen or on the  
display window of the FMWCC30 harsh  
environment case. Note the following:  
• Before installing a new screen protector, remove  
any screen protector that is already installed. (A  
notch in the corner of the screen protector allows  
you to slide your fingernail or a sharp  
implement under the screen protector for  
removal.)  
To ensure good adhesion, clean the display  
screen with a soft cotton cloth dampened with  
denatured alcohol before installing the screen  
protector.  
4. Remove the protective film from top of the screen  
protector.  
1. For installation on the Harsh Environment Case  
only: Remove edge from screen protector.  
2. Peel protective film from adhesive side of screen  
protector.  
5. Clean the exposed surface of the screen protector  
with a soft cotton cloth dampened with denatured  
alcohol to remove any adhesive left behind by the  
protective film.  
Stylistic 2300 is a trademark of Fujitsu Personal Systems, Inc.  
© 1998 Fujitsu Personal Systems, Inc.  
9/98  
58-0601-00A  
 

Echo Trimmer SUP22203220 User Manual
Electro Voice Portable Speaker PIM 102 User Manual
Ericsson Portable Radio LBI 39175A User Manual
Euro Pro Frozen Dessert Maker KP170H User Manual
Exido Blender 246 015 User Manual
Fellowes Laminator Titan A3 User Manual
Fiesta Products Building Set 7305 User Manual
Fujitsu Tablet ST4000 User Manual
GE Microwave Oven SCA1000WH User Manual
Gemini Speaker GT 1004 User Manual