24999
Universal Remote
Instruction Manual
Introduction
Congratulations.on.your.purchase.of.this.24999.Universal.Remote.
Control..It.is.one.of.the.most.unique.looking,.and.easy.to.use.remote.
controls.available.today..Its.stylish.looking.blue.backlight,.and.metallic.
keypad.is.like.no.other.remote..With.the.24999.juggling.multiple.remote.
controls.is.a.thing.of.the.past!.Your.24999.Universal.Remote.controls.
up.to.8.devices,.including.the.most.popular.brands.of.TV,.VCR,.DVD,.SAT,.
CBL,.and.audio.equipment..
Note:.Some.functions.from.your.original.remote.may.not.be.controlled.
by.the.24999.remote..Use.the.original.remote,.if.available,.to.control.
such.functions..Sometimes.buttons.other.than.described.in.these.
instructions.may.actually.perform.the.function..For.example,.the.CHAN.
and.VOL.buttons.might.be.used.to.navigate.through.menu.choices..
We.recommend.you.experiment.with.the.remote.to.identify.if.such.
situations.pertain.to.your.equipment..
The.24999.Universal.Remote.is.easy.to.use,.easy.to.program,.and.it.
gives.you.total.control—at.the.touch.of.your.fingertips!
3
Button Functions
1.
26.
25.
24.
23.
22.
21.
20.
19.
18.
17.
16.
15.
14.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Note:.The.REC button.must.be.pressed.TWICE.to.record.from.your.
device..For.some.brands.of.VCRs,.you.might.need.to.press.the.REC
button.once,.then.press.it.again.for.three.seconds.
Some.buttons.on.the.remote.might.have.functions.that.are.referred.
to.by.different.names.on.the.device.you.are.controlling..E.G..LAST.may.
be.called.RECALL,.or.ENTER may.be.called.DISPLAY..These.differences.
depend.on.the.brand.and.model.of.your.product..Also,.this.remote.can.
only.operate.features.that.exist.on.your.product..E.G.,.your.product.
must.have.LAST.ability.for.the.LAST button.to.operate.this.feature.
4
Button Functions, cont.
1. Liquid Crystal Display (LCD): Helps.with.setup.and.displays.the.
Mode.the.remote.is.in,.and.time,.etc.
2. SETUP: Used.for.setting.up.your.remote.
3. TV, DVD, DVR, etc.:.Selects.product.to.be.operated.
4. EXIT:.Exits.On-Screen.Menus/Returns.to.previous.On-Screen.
selection.
5. Dot:.Used.for.digital.channels,.e.g..2.3..
6. MENU: Brings.up.the.device.Menu.screen.(if.available).-.use.with.
UP,.DOWN,.LEFT,.and.RIGHT navigation.buttons.
7. MUTE: Turns.off.the.TV.sound.while.the.picture.remains.
8. . UP,.DOWN,.LEFT &.RIGHT: Navigation.buttons.
9. VOLUME UP/DOWN: Changes.the.volume.level.of.the.product,.
normally.the.TV.
10. OK: Selects.menu.items.for.the.device.you.are.controlling.
11. ABCD buttons:.Used.to.store.learned.commands.
12.. REPLAY: On.some.DVRs,.this.button.replays.the.last.8.seconds.of.a.
program.
13.. PAGE DOWN: Sets.your.Favorites.ratings,.and.moves.one.screen.
down.at.a.time.in.guides.and.menus.
14. RECORD, PLAY, STOP, REW, FF, PAUSE:.Control.buttons.that.
operate.your.DVD/DVR.even.when.the.remote.is.set.to.operate.the.
TV..Also.operates.DVD.Scan.-/+.
15. LIVE:.Returns.to.live.TV.
16.. PAGE UP:.Sets.your.Favorites.ratings,.and.moves.one.screen.up.at.
a.time.in.guides.and.menus.
17. INPUT: For.some.TVs,.press.repeatedly.to.select.available.viewing.
sources.(antenna,.cable.box,.VCR,.DVD,.etc.).
18. DVR List:.Press.to.display.list.of.recorded.shows.on.your.DVR.
19. CHANNEL UP/DOWN: Changes.the.channels..Also.controls.DVD/
CD.CHAPTER.+/-.track.selection,.i.e.,.DVD/CD.Track.Skip.Up/Down..
Note.the.DVR buttons.also.control.the.DVD.when.in.DVD.Mode.
20. LAST:.Returns.to.the.previously.selected.channel,.or.DVD.repeat.
toggle..
21. INFO: Displays/selects.on-screen.channel.information.
22. GUIDE:.Displays.on-screen.program.or.channel.guides.
23. ENTER:.Used.after.direct.channel.number.entry.to.immediately.
change.to.the.selected.channel.
24. NUMBERS:.Enter.numbers.for.direct.channel.selection..Some.
products.require.Enter.to.be.pressed.after.channel.selection.
25. ASPECT: Aspect.Ratio.Control.selects.viewing.format.for.the.
displayed.picture,.e.g.,.Wide,.Zoom,.etc.
26. POWER: Turns.device.on.or.off.
DVD/DVR Punch-Through Feature
This.remote.allows.the.6.DVD/DVR.transport.buttons.(i.e.,.PLAY,.PAUSE,.
STOP,.FF,.REWIND,.and.REC).to.operate.the.programmed.TV,.DVD,.
SAT,.DVR,.Cable.device.if.the.code.has.these.button.functions.e.g..if.
you.have.programmed.a.SAT/DVR.or.Cable/DVR,.etc..Otherwise.the.
transport.keys.will.punch-through.to.the.last.DVD.or.VCR.programmed.
mode.you.used,.i.e.,.the.transport.buttons.control.your.DVD.or.VCR.
player.even.when.you.are.in.TV,.SAT.or.Cable.mode.
5
Setup
Battery Installation
1..On.the.back.of.the.remote,.push.down.on.the.
tab.and.lift.the.cover.off.
2..Match.the.batteries.to.the.+.and.-.marks.inside.
the.battery.case,.then.insert.2.AAA.Alkaline.
batteries.
3..Press.the.battery.cover.back.into.place.
Battery Saver
Your.remote.automatically.turns.off.if.the.buttons.
are.depressed.more.than.30.seconds..This.will.
save.your.batteries.should.your.remote.get.stuck.
in.a.place.where.the.buttons.remain.depressed.
(e.g.,.between.the.sofa.cushions).
Code Saver
All.user.programmed.settings,.except.Time,.Day,.and.Date.will.be.stored.
in.permanent.memory.while.you.are.changing.batteries,.so.you.will.not.
lose.any.codes.stored.in.the.remote.while.you.are.changing.batteries..
Time,.Day,.and.Date,.will.be.cleared.to.the.factory.defaults.when.the.
batteries.are.replaced.
Power-On Default
The.remote.powers.on.in.TV.mode.
Liquid Crystal Display (LCD).
The.LCD.lets.you.see.at.a.glance.what.mode.the.remote.is.in..It.also.
includes.a.clock.that.displays.the.time.and.day,.and.a.visual.indication.
that.the.remote.is.transmitting.when.you.press.a.button.
Code Setup
The.SETUP.button.is.used.to.setup.the.remote..You.can.either.setup.the.
remote.using.the.code.for.your.brand.of.product,.from.the.code.tables.
(on.separate.sheet),.or.you.can.search.through.the.library.of.codes.until.
you.find.a.code.that.works.for.your.product.
You.can.store.any.kind.of.code.under.any.mode.(except.TV)..I.E..you.can.
store.a.VCR.code.under.the.CBL button,.or.a.DVD.code.under.the.VCR
button,.etc..However,.you.can.only.store.TV.codes.under.the.TV button.
The SETUP button.is.used.for.programming.the.remote.and.accessing.
any.additional.features.-.e.g..Shifted.functions,.see.below..To.enter.setup.
mode,.press.and.hold.the.SETUP button.until.“CODE.SETUP”.appears.in.
the.display..The.“SET”.symbol.will.always.be.shown.when.the.remote.is.
in.Setup..Successive.presses.of.the.SETUP button.shows.available.Setup.
options.in.the.order.shown.below..
1..CODE.SETUP.–.press.OK here.to.program.a.Mode.e.g..Code.Entry,.
Search,.etc..See.Code.Setup.options.below.
2..SYSTEM.SETUP.–.press.OK here.to.set.Time,.Date,.Volume.Control,.etc..
3..TIMER.SETUP.–.press.OK here.to.set.Timer.events.
4..LEARN.SETUP.–.press.OK here.to.program.a.Mode.with.Learned.
commands.
5..EXIT.SETUP.–.press.OK here.to.Exit.Setup.routines.and.return.to.
normal.operation.
Press.OK to.select.the.desired.programming.step.required..
Exit.from.Setup.occurs.automatically.after.approximately.15.seconds.if.
no.buttons.is.pressed..TIME.OUT.is.displayed.
When.the.remote.is.busy.processing.in.Setup.routines,.“Please.Wait”.is.
displayed.
6
Setup, cont.
Setup Screen Navigation.Use.the.SETUP,.OK,.and.Up,.Down,.Left.and.
Right.navigation.buttons.for.Setup.screen.navigation.and.selection..
To.exit.the.Setup.routines.and.return.to.normal.operation,.press.the.
EXIT button.or.navigate.to.the.“EXIT.SETUP”.screen.and.press.OK..
Completion.of.some.Setup.routines.will.automatically.return.the.remote.
to.normal.operation.
Mode button press Display.Pressing.and.holding.a.Mode.button.
changes.to.that.Mode.and.displays.the.active.Mode.and.its.code,.e.g.,.
DVD.and.the.programmed.4-digit.code.e.g.,.0768..The.display.returns.to.
normal.when.you.release.the.button.
SETUP (Shift) Display.Pressing.and.releasing.the.Setup.button.displays.
the.active.Mode.of.the.remote.e.g..DVD,.the.Date.e.g..3:26.(Month:Day).
and.indicates.“Shift”.operation.with.“(S)”..Press.and.release.Exit.to.return.
to.normal.display..To.use.the.SETUP button.for.Shift.-.Press.and.release.
SETUP followed.by.the.desired.secondary.function.button.
7
Code Entry
Code Setup Options:.Pressing.OK at.the.CODE.SETUP.screen.presents.
3.options.for.programming.a.Mode.with.codes..These.are.LIST.CODES.
(lets.you.enter.a.4.digit.code.from.the.on-screen.code.list),.ENTER.CODES,.
(lets.you.enter.a.4.digit.code.directly.from.the.printed.code.list).SEARCH.
CODES,.(lets.you.search.through.the.codes.stored.in.the.remote.to.find.
the.correct.one.for.your.device).
Code Entry using On-screen Code List
1..Manually.turn.on.the.device.to.be.controlled.
2..Press.and.hold.the.SETUP button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the.SETUP button.
3..Press.and.release.OK..LIST.CODES.is.displayed.
4..Press.and.release.OK..MODE.KEY?.is.displayed.
5..Press.and.release.the.desired.mode.button.(TV,.VCR,.DVD,.etc.)..The.
Mode.is.displayed.along.with.its.currently.programmed.code..
6..Using.the.UP/DOWN.buttons,.select.the.Device.type.to.be.
programmed.(TV,.VCR,.DVD,.etc..Note - For TV Mode, only a TV
Device can be selected.
7..Press.and.release.OK to.confirm.selection..
8..The.Code.List.Brand.and.Code.will.now.be.displayed.(e.g..Admiral.
0000)..Use.the.UP/DOWN.buttons.to.select.the.Brand.and.LEFT/
RIGHT.buttons.to.select.the.Code..Codes.can.be.tested.on.your.
device.using.VOLUME, MUTE, CHANNEL, POWER, INPUT, PLAY,
STOP, FF, REWIND and.PAUSE. Once.the.correct.code.has.been.
found,.press.and.release.OK to.install.the.Code..
9..PLEASE.WAIT.is.briefly.displayed,.followed.by.SUCCESS.and.the.
remote.returns.to.normal.operation..
10..With.your.device.on,.press.CHANNEL UP..If.the.device.responds,.
no.further.programming.is.required..Note:.If.some.buttons.do.not.
operate.your.equipment,.try.one.of.the.other.codes.for.your.brand.
of.device..
Direct Code Entry
1..Manually.turn.on.the.device.to.be.controlled.
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
3..Press.and.release.OK..LIST.CODES.is.displayed.
4..Press.the.DOWN navigation.button.until.ENTER.CODES.is.displayed..
5..Press.and.release.OK..MODE.KEY?.is.displayed.
6..Press.and.release.the.desired.mode.button.(TV, VCR,.DVD,.etc.)..The.
Mode.is.displayed.along.with.its.currently.programmed.code.
7..Enter.the.4.digit.code.from.the.code.tables.(on.separate.sheet)..After.
the.4th.digit.is.entered.SUCCESS.is.displayed.and.the.remote.returns.
to.normal.operation..
If.an.invalid.code.is.entered,.CODE.ERROR.is.shown.in.the.display.and.
the.remote.returns.to.normal.operation..
8..With.your.device.on,.press CHANNEL UP..If.the.device.responds,.
no.further.programming.is.required..Note:.If.some.buttons.do.not.
operate.your.equipment,.try.one.of.the.other.codes.for.your.brand.
of.device.
8
Code Entry, cont.
Searching for Codes
If.your.product.does.not.respond.after.you.have.tried.all.the.codes.for.
your.brand,.or.if.your.brand.is.not.listed,.try.searching.for.your.code.by.
following.these.steps.
1..Manually.turn.on.the.device.(TV,.VCR,.DVD,.etc.).to.be.controlled.
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
3..Press.and.release.OK..LIST.CODES.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.SEARCH.CODES.is.
displayed.
5..Press.and.release.OK..MODE.KEY.is.displayed.
6..Press.and.release.the.desired.mode.button.(TV, VCR,.DVD,.etc.)..
DEVICE?.TV.is.displayed.
7..Using.the.Up/Down.keys,.select.the.Device.type.to.be.programmed.
(TV,.VCR,.DVD,.etc..Note - For TV Mode, only a TV Device can be
selected.
8..Press.and.release.OK to.confirm.selection..SEARCH.KEY?.is.displayed..
9..Press.the.CHANNEL UP.button.(or.POWER,.or.PLAY for.VCRs/
DVDs).repeatedly.(up.to.300.times).until.the.Device.to.be.controlled.
changes.channel,.turns.off.or.responds.accordingly..SEARCHING.
is.displayed.(along.with.the.Device.selection).during.the.search.
process..If.the.desired.Code.is.accidentally.passed.then.press.the.
CHANNEL DOWN.button.to.backtrack.through.the.Library..Press.
CHANNEL UP.(or.POWER.or.PLAY).to.change.direction.forward.again..
10..Press.and.release.OK to.install.the.Code..PLEASE.WAIT.is.briefly.
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.
operation.
Notes:
1..If.the.Device.does.not.have.a.CHANNEL UP button,.use.PLAY (VCR/DVD).
or.the.POWER button.instead.
2..Code.Search.starts.from.the.currently.stored.4-digit.number.under.
that.Mode.
3..When.all.codes.have.been.searched.SEARCH.END.is.displayed.and.
remote.returns.to.normal.operation.
Code Identification Feature
Press.and.hold.the.respective.Mode.key.in.normal.operation.to.display.
the.programmed.code.for.that.Mode.e.g.,.DVD.Code.0768.
Programming Combo Device Codes
Some.combo.(combination).devices.(TV/DVR,.TV/DVD,.DVD/DVR,.etc.).
require.you.to.set.up.2.different.modes.to.control.both.parts.of.the.
combo..For.example,.if.you.have.a.TV/DVD.combo,.you.might.need.to.
set.up.one.code.under.the.TV.mode.to.control.the.TV.and.a.separate.
code.(under.other.modes).to.control.the.DVD.
9
Setup, cont.
System Setup Options
Pressing.OK at.the.SYSTEM.SETUP.screen.accesses.the.System.Setup.
Options.for.Volume.Punch-Through.control.Setup,.Time.Setup,.Date.Setup,.
Backlight.Setup.and.System.Reset.
Volume/Mute Control and Punch-Through Feature
Your.remote.allows.you.to.select.which.device.mode.controls.VOLUME.
and.MUTE..This.remote.is.initially.set.for.all.device.modes.to.use.their.
own.Volume/Mute.control.if.present..If.the.programmed.code.does.not.
have.Volume/Mute.operation,.then.VOLUME.and.MUTE.will.“punch-
through”.(hand-over).control.to.the.TV.mode.device.without.you.
needing.to.change.to.TV.mode..Note:.Any.mode.chosen.for.Volume/
Mute.control.must.have.its.own.Volume/Mute.function.or.else.VOLUME.
and.MUTE.will.not.function.
Setting ALL Volume/Mute Control to any one Mode (ALL VOL. SET)
This.routine.can.set.all.Modes.to.“punch-through”.to.any.one.chosen.
Mode.for.Volume/Mute.button.control.without.needing.to.change.to.
that.Mode.
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.
5..Press.and.release.OK..ALL.VOL..MODE?.is.displayed.
6..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).for.Volume/
Mute.control..PLEASE.WAIT.is.briefly.displayed,.followed.by.SUCCESS.
and.the.remote.returns.to.normal.operation.
All.Modes.will.now.punch-through.to.your.chosen.Mode.for.Volume/
Mute.control..If.the.chosen.Mode.has.no.Volume/Mute.commands.of.its.
own,.“Volume.Error”.is.shown.in.the.display.and.the.remote.returns.to.
normal.operation..
Setting any Mode to use its own Volume/Mute Control (MODE VOL.
SET)
This.sets.any.Mode.to.use.only.its.own.Volume/Mute.control,.i.e..
Volume/Mute.punch-through.is.disabled.for.this.Mode..Note.-.If.your.
chosen.Mode.has.no.Volume/Mute.functions.of.its.own.then.the.
Volume/Mute.buttons.will.do.nothing.
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.
5..Press.the.down.navigation.button.until.MODE.VOL..SET.is.displayed.
6..Press.and.release.OK..MODE.VOL..MODE?.is.displayed.
7..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).to.be.disabled.
for.Volume/Mute.punch-through.control..PLEASE.WAIT.is.briefly.
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.
operation.
The.chosen.Mode.will.now.use.its.own.Volume/Mute.control.
10
Setup, cont.
Resetting Volume/Mute Control to Factory Defaults (VOL/MUTE
RESET) This.resets.Volume/Mute.control.back.to.its.Factory.default.
settings..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.
5..Press.the.down.navigation.button.repeatedly.until.VOL/MUTE.RESET.
is.displayed.
6..Press.and.release.OK..CONFIRM.RESET.is.displayed.
7..Press.and.release.OK..PLEASE.WAIT.is.briefly.displayed,.followed.by.
SUCCESS.and.the.remote.returns.to.normal.operation.
Volume/Mute.control.is.now.rest.to.its.Factory.default.settings.
11
Setup, cont.
Setting the Time of Day (TIME SETUP) To.set.the.Time.of.day.for.normal.
LCD.time.display..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.until.TIME.SETUP.is.displayed.
5..Press.and.release.OK..TIME?.is.displayed.showing.current.format.(12.
or.24.hour).flashing.and.current.time.
6..Use.the.Up/Down.navigation.buttons.to.set.the.format.(12Hr.or.24Hr).
then.press.and.release.OK.
7..The.“hours”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.hours.
(keep.going.past.12.to.select.PM.hours).then.press.and.release.OK..
8..The.“minutes”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.
minutes.then.press.and.release.OK.
9..SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation.
Setting the Date (DATE SETUP) To.set.the.Month,.Date.and.Day..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.DATE.SETUP.is.
displayed..
5..Press.and.release.OK..YEAR?.is.displayed.with.the.last.2.year.digits.
flashing..
6..Use.the.Up/Down.buttons.to.set.the.Year.then.press.and.release.OK.
7..MONTH?.is.displayed.with.the.Month.digits.flashing..Use.the.Up/Down.
buttons.to.set.the.Month.then.press.and.release.OK.
8..DATE?.is.displayed.with.the.Date.digits.flashing..Use.the.Up/Down.
buttons.to.set.the.Date.then.press.and.release.OK.
9..DAY?.is.displayed.with.the.Day.flashing..Use.the.Up/Down.buttons.to.
set.the.Day.then.press.and.release.OK.
10..SUCCESS.is.displayed,.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
12
Setup, cont.
Setting the Backlighting On time (BACKLIGHT SETUP).To.set.the.length.
of.time.the.Backlighting.remains.on.after.you.stop.pressing.buttons.
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.BACKLIGHT.SETUP.
is.displayed..Press.and.release.OK.
5..BACKLIGHT.TIME?.is.displayed.with.the.current.Backlight.On.time.digits.
flashing..Use.the.Up/Down.buttons.to.set.the.Backlight.On.time.in.
increments.of.5.seconds.up.to.a.maximum.of.60.seconds..The.default.
Backlight.On.time.is.10.seconds..To.turn.the.Backlighting.feature.off,.
set.the.time.to.“00”.(zero)..Press.and.release.OK.
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
Reset the LCD Remote to Factory Defaults (SYSTEM RESET) To.reset.
the.remote.back.to.factory.default.settings..All.User.programmed.
settings,.e.g..code.settings,.learned.commands,.etc.,.are.cleared.to.their.
respective.default.settings..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.SYSTEM.RESET.is.
displayed..Press.and.release.OK.
5..CONFIRM.RESET.is.displayed..Press.and.release.OK.
6..PLEASE.WAIT.is.displayed.while.all.settings.are.Reset.then.the.remote.
exits.Setup.and.returns.to.normal.operation.
13
Setup, cont.
Timer Setup
Pressing.OK at.TIMER.SETUP.accesses.the.available.Timer.Options..
These.are.a.TV.Sleep.Timer.and.4.Timers.that.can.send.a.sequence.of.
up.to.3.key.commands.at.the.preset.time.
Setting and Clearing a TV Sleep Timer (TV Sleep Setup)
The.remote.can.be.programmed.with.a.TV.Sleep.Timer..At.the.end.of.
the.set.Timer.period,.the.remote.sends.the.Power.command.for.the.
TV.Mode.device..The.TV.Sleep.Timer.can.be.set.for.a.period.of.1-90.
minutes..The.“Zzz”.symbol.is.displayed.when.a.TV.Sleep.Timer.is.set.
To set a TV Sleep Timer (no “Zzz” in normal display)
1..Turn.on.the.TV.Mode.device.
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
3..Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..Press.and.release.OK.
4..TV.SLEEP.SETUP.is.displayed..Press.and.release.OK.
5..TV.SLEEP.SET.is.displayed..Press.and.release.OK.
6..TV.SLEEP.TIME?.is.displayed.with.“minutes”.flashing..Use.the.Up/Down.
buttons.to.set.the.minutes.then.press.and.release.OK.
7..SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..
Zzz.is.displayed.on.the.screen.to.indicate.that.a.Sleep.Timer.is.set.
To clear a TV Sleep Timer (“Zzz” in normal display)
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..Press.and.release.OK.
3..TV.SLEEP.SETUP.is.displayed..Press.and.release.OK.
4..TV.SLEEP.CLEAR.is.displayed..Press.and.release.OK.
5..CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
Setting and Clearing Timers (TIMER SETUP)
The.remote.can.be.programmed.with.up.to.4.Timers.(Timer.1,.2,.3.&.4)..
Each.Timer.can.be.assigned.up.to.2.keys.to.activate.at.the.set.time..The.
first.key.must.always.be.a.Mode.key..Subsequent.keys.cannot.include.
Up,.Down,.Left,.Right,.OK,.Exit,.Setup.or.any.Mode.key..Timers.can.only.
activate.within.the.following.24-hour.period..Timers.are.automatically.
cleared.after.activation..The.“Timer.Bell”.symbol.is.displayed.when.any.
Timer.is.set.
14
Setup, cont.
To set a Timer (Note, the Timer must be cleared first if it was previously
set – see To Clear a Timer below)
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..
3.. Press.and.release.OK..TV.SLEEP.SETUP.is.displayed..
4.. Press.the.down.navigation.button.until.TIMER.X.SETUP.is.displayed.
(where.“X”.is.1,.2,.3.or.4)..Press.and.release.OK.
5.. TIMER.X.SET.is.displayed..Press.and.release.OK.
6.. TIMER.X.TIME?”.is.displayed.with.the.“hours”.flashing..Use.the.Up/Down.
buttons.to.set.the.hours.(keep.going.past.12.to.select.PM.times).then.
press.and.release.OK.
7.. The.“minutes”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.
minutes.then.press.and.release.OK.
8.. TIMER.X.MODE?.is.displayed..Press.and.release.the.desired.Mode.key.
(TV,.VCR,.DVD,.etc.).
9.. TIMER.X.Key1?.is.displayed..Press.and.release.the.key.required.(e.g..
POWER).
10.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..
A.“Timer.Bell”.is.displayed.on.the.screen.to.indicate.that.a.timer.is.set.
To clear a Timer (“Timer Bell” in normal display)
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..
3.. Press.and.release.OK..TV.SLEEP.SETUP.is.displayed..
4.. Press.the.down.navigation.button.until.the.desired.TIMER.X.SETUP.is.
displayed.(where.“X”.is.1,.2,.3.or.4).screen..Press.and.release.OK.
5.. TIMER.X.CLEAR.is.displayed..Press.and.release.OK.
6.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
7.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation.
15
Code Learning
Tips On Learning
You.can.only.learn.one.device.type.under.any.one.Mode.button.e.g..
only.learn.TV.codes.under.the.TV Mode,.DVD.codes.under.the.DVD
Mode,.etc..If.you.are.trying.to.learn.from.a.“Universal”.remote,.it.might.
have.more.than.one.code.type.stored.under.a.Mode..Try.learning.from.
another.remote.to.see.if.there’s.a.problem.with.the.type.or.brand.of.
remote.you.are.trying.to.learn.from..
a. Some functions from some types of remotes might not be able to
be learned.
b. No functions may be stored under the SETUP button.
c. Only one original device type can be learned per individual Mode.
d. Use.fresh.batteries.for.both.the.Learning.Remote.and.the.Original.
Remote.
e. Do.not.attempt.to.Learn.directly.under.an.incandescent.or.
low-energy.light.as.these.can.cause.interference.with.the.IR.
transmissions..Keep.at.least.3.feet.away.from.any.such.light.sources.
f. Perform.a.Master.Clear.(see.page.22).before.learning.and.try.learning.
2.or.3.commands.initially..Then.carry.out.a.Master.Clear.before.
completely.learning.your.original.remote’s.commands.
g..Carry.out.a.“Mode.Clear”.before.learning.a.Mode.to.make.sure.there.
are.no.previously.learned.commands.for.that.Mode.
h. Place.the.original.remote.end-to-end.with.the.Learning.Remote.so.
the.IR.transmitters.on.both.remotes.are.directly.in.line.with.each.
other..You.may.need.to.adjust.the.height.of.either.remote.to.achieve.
this..
i. Keep.the.distance.between.the.two.remotes.to.approximately.1.inch.
and.do.not.move.or.change.the.distance.between.the.two.remotes.
until.you.have.learned.all.the.required.buttons.for.that.Mode.
j. Avoid.learning.your.original.remote.Volume/Mute.buttons.unless.
you.are.sure.these.operate.the.same.device.e.g..some.original.DVD.
remotes.include.TV.Volume/Mute.button.control.and.can.be.two.
different.types.of.code.
k. Avoid.learning.your.original.remote.VCR.or.DVD.buttons.unless.
you.are.sure.these.operate.the.same.device.e.g..some.original.TV.
remotes.include.VCR.or.DVD.button.control.and.can.be.two.different.
types.of.code.
l..Learning.a.button.can.take.up.to.3.seconds..Do.not.release.the.button.
being.Learned.until.SUCCESS.or.LEARN.ERROR.has.been.displayed.
16
Tips On Learning, cont.
Tips On Learning, cont.
m. If.learning.the.first.or.second.buttons.for.a.Mode.results.in.
continuous.errors.then.try.the.following:
i... End.the.Learn.session.by.pressing.the.EXIT button.
ii...Clear.out.the.learned.commands.for.that.Mode.
iii...Check.the.IR.transmitters.are.correctly.aligned.between.the.two.
remotes.
iv...Adjust.the.distance.between.the.two.remotes.to.be.closer.(e.g..
half.an.inch).or.a.further.away.(e.g..2.inches).from.each.other.
v...Try.learning.the.original.remote.for.that.Mode.again.
If.problems.reoccur.with.the.same.button.check.the.original.remote.
button.being.learned.–.does.it.transmit?.Does.it.operate.the.target.
device?.Try.learning.that.button.under.a.different clear.Mode..If.it.learns.
okay.then.it.is.likely.to.be.a.different.code.type.from.the.others.and.
cannot.be.learned.under.the.same.Mode.
Learning Notes
1.. You.cannot.learn.under.the.Setup.button.
2.. All.learned.commands.for.a.Mode.are.deleted.if.the.same.or.a.new.
4-digit.code.is.entered.for.that.Mode.by.any.Code.Entry.or.Code.
Search.
3.. The.Backlighting.is.turned.off.for.Learning.
17
Learning Commands
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.
displayed..Press.and.release.OK.
3..MODE.LEARN.is.displayed..Press.and.release.OK.
4..MODE.KEY?.is.displayed..Press.and.release.the.desired.Mode.button.
(TV,.VCR,.DVD,.etc.).
5..LEARN.KEY?.is.displayed..Press.and.release.the.key.on.the.24999.remote.
that.you.want.to.be.taught.a.code,.e.g..POWER.
6..LEARNING.is.displayed..Pointing.the.remotes.as.shown.below,.press.
and.hold.the.original.remote.key.(e.g..POWER).until.the.SUCCESS.or.
LEARN.ERROR.is.displayed.(see.Tips.on.Learning,.page.19).followed.by.
LEARN.MORE?.(this.process.can.take.up.to.2.or.3.seconds.to.complete)..
Release.the.original.remote.button.
7..LEARN.MORE?.is.still.displayed..To.learn.more.buttons,.press.and.release.
OK and.repeat.from.step.5..To.exit.at.this.point,.press.and.release.EXIT.
8..PLEASE.WAIT.is.displayed.briefly.and.the.remote.exits.Setup.Mode.and.
returns.to.normal.operation.
Line.up.your.remotes.(that.you’re.learning.from).in.front.of.the.Learning.
remote,.on.a.hard.surface.approx..1.inch.apart.
18
Clearing Commands
To Clear all Learned Commands under a mode
Clearing.learned.commands.is.helpful.if,.for.example,.you.replace.your.
CD.player.with.another.brand.or.model..If.you.had.learned.a.feature.
from.your.old.CD.player’s.original.remote.on.to.this.remote.(such.as.
RANDOM.PLAY),.that.feature.would.no.longer.work.for.your.new.CD.
player..Should.you.wish.to.remove.or.clear.one.or.more.“learned”.
commands,.follow.the.steps.below:
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.
displayed..Press.and.release.OK..MODE.LEARN.is.displayed.
3.. Press.the.down.navigation.button.until.MODE.CLEAR.is.displayed..Press.
and.release.OK.
4.. MODE.KEY?.is.displayed..Press.and.release.the.desired.Mode.button.
(TV,.VCR,.DVD,.etc.).
5.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
6.. PLEASE.WAIT.is.briefly.displayed.followed.by.SUCCESS.and.the.remote.
exits.Setup.Mode.and.returns.to.normal.operation.
Master Clear - To Clear all Learned Commands under all modes
(recommended on first time Learning)
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.
displayed..Press.and.release.OK..MODE.LEARN.is.displayed.
3.. Press.the.down.navigation.button.repeatedly.until.ALL.LEARN.CLEAR.
is.displayed..Press.and.release.OK.
4.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
5.. PLEASE.WAIT.is.briefly.displayed.followed.by.SUCCESS.and.the.remote.
exits.Setup.Mode.and.returns.to.normal.operation.
19
Troubleshooting
Remote does not operate your product.
•.Press.the.mode.button.of.the.product.you.want.to.control.
•.Program.the.remote.with.a.new.code.
•.Install.new.batteries..(You.might.have.to.reprogram.your.remote.after.
installing.new.batteries.)
•.Remote.may.not.be.compatible.with.your.product.
Remote does not operate some features of your product.
•.Program.remote.with.a.new.code.
•.Remote.may.not.be.able.to.operate.all.features.of.your.product.or.
button.names.might.be.different.than.your.product.
Lost Your Codes?
Should.you.lose.your.codes.or.programming.instructions,.you.can.find.
available.on.our.website:
www.jascoproducts.com
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to
operate the equipment.
90 Day Limited Warranty
Jasco.Products.Company.warrants.this.product.to.be.free.from.
manufacturing.defects.for.a.period.of.ninety.days.from.the.original.
date.of.consumer.purchase..This.warranty.is.limited.to.the.repair.or.
replacement.of.this.product.only.and.does.not.extend.to.consequential.
or.incidental.damage.to.other.products.that.may.be.used.with.this.
unit..This.warranty.is.in.lieu.of.all.other.warranties.express.or.implied..
Some.states.do.not.allow.limitations.on.how.long.an.implied.warranty.
lasts.or.permit.the.exclusion.or.limitation.of.incidental.or.consequential.
damages,.so.the.above.limitations.may.not.apply.to.you..This.warranty.
gives.you.specific.rights,.and.you.may.also.have.other.rights.which.vary.
from.state.to.state..If.unit.should.prove.defective.within.the.warranty.
period,.return.prepaid.with.dated.proof.of.purchase.to:
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK.73114-2205
20
24999
Universal Remote
Instruction Manual
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK.73114-2205
24999-12/10
Made.in.China.
.
21
|