EM-600/EM-600TD
Mini Electromagnetic Lock
Operating Features
Trigger
EM-600TD: Re-locking time delay
Relocking Time Delay Switch ensures
the l automatically turns to lock mode
N.C.
Timer Adjust
l
COM.
N.O.
after the door is closed properly and it
can be adjusted from 0 to 90 seconds.
Shorten
Power
Input
Optional Brackets
With LZ-bracket for in-swinging doors
LZ-EM-600
Features
High reliability
Fail- safe operation ( Power to Lock).
Anodized aluminum housing.
MOV provides spike and surge protection.
Dual voltage 12 or 24 VDC (selectable).
Anti-Residual magnetism designed
Statement
Regular Installation
The EM-600 are high quality and safety range of standard fail-
safe electromagnetic locks that is simply, works well in order to
effectively secure with doors. The EM-600 are surface mounted face
to face locks offering up to 600 pounds holding force which this lock
is recommended for applications which require higher levels of
access and egress control and is suitable for fire doors and
emergency exit doors. The EM-600 Series are designed for single
doors and are suitable for out-swing applications.
Specifications
Voltage Tolerance: 15%
Current Draw: 500mA@12Vdc;250mA@24Vdc
)at 20 degree centigrade(
Magnet
Armature
Operating Temperature from -10 to 55 degree
centigrade
(On Power)
Humidity: 0~95% non-condensing.
Holding Force: Up to 600 lbs (272 Kg)
Dimensions:
Unique Anti-Residual design
Magnet:(L) 250, (W) 42.5, (D) 25 mm
Armature Plate:(L) 185, (W) 38, (D) 12 mm
Mounting Plate:(L) 250, (W) 25, (D) 5 mm
Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 2.0 Kg
When the power is off, the holding force will be discontinuity
and the bolt was installed in armature will pop out
immediately. This design enables the door to be opened freely
without any resistance.
Magnetic bond sensor monitor output (SPDT rated
3A@12V DC), remotely monitors the door lock or
unlock status.
Warranty
Status LED: Lights GREEN when the door is
unlocked, lights RED when the door is locked.
Automatic relocking time delay: 1~90 seconds.
The product is warranted against defects in material and
5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
workmanship while used in normal service for a period of
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2009 Gianni industries, inc. All rights reserved.
DM-CA-EM-600 Ver. A Published on 2009.02.11
|