Gianni Industries Door GS 300 User Manual

GS-300  
MINI SURFACE MOUNT SHEAR LOCK  
Specifications  
Voltage Tolerance: 10%  
Current Draw: 420mA@12 VDC; 210mA@24 VDC  
)at temperature 20 C(  
Magnetic bond sensor monitor output (GS-300M)  
(SPDT rated 3A@30VDC), indicates the door locked  
or unlocked status.  
Operating Temperature: -30~+55 C  
Humidity: 0~95% non-condensing.  
Lock's surface Temperature (when the power is on):  
<current temperature +20 C  
Holding Force: Up to 1200 lbs (545 Kg) in shear.  
The Gap between the Lock and Armature plate is 2 mm  
Special Finishes for magnet and armature plate: Zinc  
Epoxy Potting Compound: E87252 (S), UL94V-0  
Weight )Approx.(: 1.4 Kg  
Statement  
The GS-300 mini surface mount shear lock with complete  
housing is specially designed for surface mounting door. The  
housing holds the magnet should be fitted above the door and  
the housing holds the Armature Plate should be installed on  
the door. It is essential to leave a minimum gap of 2mm  
between the Shear Lock and the Armature Plate, in order to  
perform the correct operation.  
Surface Installation  
Dimension  
176  
Magnet  
Assembly  
Header  
M6 x45 Screw  
44.5  
Blind Nut  
34  
M6 x45 Screw  
162  
Blind Nut  
Unit: mm  
Armature  
Assembly  
Metal Door  
Magnet  
Armature  
Magnet  
Armature  
(Power Off)  
(On Power)  
Warranty  
Unique Anti-Residual design  
The product is warranted against defects in material and  
workmanship while used in normal service for a period of  
year from the date of sale to the original customer. The GEM  
policy is one of continual development and improvement;  
therefore GEM reserves the right to change specifications  
without notice.  
When there is no power, there will be no holding force, and  
the push-off button will pop out immediately, to release the  
Electromagnetic Lock and the Armature Plate for no residual  
magnetism.  
5
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-GS-300 Ver. C Published on 2008.05.14  
 

Echo Trimmer SRM 266 User Manual
Eiki Computer Drive WL 10 User Manual
Everpure Water System EV943000 User Manual
Fiesta Gas Grill EZT40040 P301 User Manual
Fisher Price Crib 79658 User Manual
Friedrich Air Conditioner EQ08M11 User Manual
GE Coffeemaker 106804 User Manual
GE Microwave Oven 164D2966P147 User Manual
Generac Power Systems Portable Generator 005336 0 005337 0 User Manual
GE Washer GFWN1100L User Manual