MODEL H6139
2" REVERSIBLE AIR
DRILL
1
⁄
INSTRUCTION SHEET
EYE INJURY HAZARD!
Always wear safety glasses
when using this tool to
prevent serious personal
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service.
EXPLOSION HAZARD!
Never exceed 120 PSI.
Figure 1. Model H6139.
Introduction
Features include a pistol grip with trigger switch,
Quick
Connector
Quick
Connector
Lubricator
Regulator
1
forward and reverse switch and ⁄4" NPT female
Your
Tool
Air
1
Compressor
air inlet. The ⁄2" chuck accepts drill bits down
1
Quick
Coupler
to ⁄64" and includes a chuck key. The auxiliary
Quick
Coupler
handle can be positioned anywhere around the
drill body.
Air Hose
Filter
Figure 2. Installing your tool.
Inventory
A. Air Drill........................................................ 1
1
B.
⁄4" NPT Quick Connect Fitting (male)........ 1
C. Chuck Key.................................................. 1
D. Handle........................................................ 1
E. Lock Collar ................................................. 1
Operation
Tool requires 90 PSI to operate correctly.
Figure 3. Lubricating directly into air fitting.
To improve tool lifespan, use a filter/lubricator/
regulator as shown in Figure 2. Otherwise, lubri-
cate daily with a couple drops of pneumatic tool oil
directly into the air fitting as shown in Figure 3.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPYRIGHT © FEBRUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#KM7955 PRINTED IN CHINA
|