MODEL H7827 DRILL
PRESS TABLE
INSTRUCTIONS
optional
Mortising
Attachment
Fence.Stop
Knob
Fence
Damage to your eyes, lungs, and ears could
result from using a drill press without
protective gear, such as safety glasses,
a
respirator, and hearing protection.
Table
Specifications
Figure 1. Drill.press.fitted.with.Model.H7827.drill.
press.table.and.optional.mortising.attachment.
•
•
•
•
•
•
Size..........................233⁄4".W.x.117⁄8".D.x.3".T
Aluminum.Insert.T-Slots............................... 2
Wooden.T-Slots............................................ 1
Weight................................................101⁄2.lbs.
Construction..............Melamine-Coated.MDF
Color...................................................... White
Inventory (Refer to Figures 1 & 2)
Qty
•. Table............................................................. 1
•
•
•
•
Fence............................................................ 1
Fence.Stop................................................... 1
Knobs........................................................... 5
Clamp.Assemblies........................................ 2
Clamp.Assembly
Installation
Figure 2. Installed.table.
1. File.down.any.nicks.or.burrs.in.the.drill.press.
table,.clean.the.surface.and.wipe.a.light.coat.
of.machine.oil.on.the.table.to.prevent.rust.if.
any.condensation.should.occur.
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
2. Place. the. Model. H7827. table. onto. the. drill.
press. table,. align. the. clamps. as. shown. in.
Figure 2,.and.snug.the.clamps.in.place.
CoPyrIgHT.©.MAy,.2009.By.grIzzly.InDuSTrIAl,.InC.
WARNINg: NO PORTION OF THIS MANUAL MAy BE REPRODUCED IN ANy SHAPE
OR FORM WITHOUT THE WRITTEN APPROvAL OF gRIzzLy INDUSTRIAL, INC.
.#Cr11853..PrInTeD.In.CHInA.
|