Certification
Before shipment, this torque wrench was calibrated
to an accuracy of +/- 4% in the clockwise direction.
Using Extensions
Typical Fastener Torque Settings
Depending on the type of extensions used, you may
need compensate for added leverage by using a
lower torque setting to reach the true torque setting
applied to the fastener.
The charts below offer average torque recommen-
dations for different fastener sizes. Exact torque
settings are defined by fastener material type and
plating, lubrication, surface finish, and whether or
not the parts being fastened have gasketed joints.
Always follow the manufacturer’s torque recommen-
dations for your particular fasteners. Regardless of
any torque recommendations, NEVER exceed the
maximum torque setting on your wrench.
Note: Compensation is only needed if the total
length of the torque wrench is extended. Typical
socket extensions that remain perpendicular to the
ratchet head do not change the length of the torque
wrench, and therefore, do not change the torque
applied to the fastener.
MODEL H8000/H8001
INDUSTRIAL
TORQUE WRENCH
Inch Fastener Torque Settings in Foot Pounds
INSTRUCTION SHEET
Material/Grade
Bolt Size
SAE 2
A307
SAE 5
A325
SAE 8
A354
�����������������
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
6
10
20
12
25
��
��
12
22
38
50
36
55
85
�
�
58
85
125
175
245
425
80
125
175
300
�
�����
112
180
�������
�������������������������������
�����������������������������
��������������������
�����������������������������
�������������������������������
Metric Fastener Torque Settings in Foot Pounds
Material/Grade
Bolt Size
CLASS 4.8 CLASS 8.8 CLASS 10.9
M5-0.8
M6-1
3
4
5
8
9
13
�������������������������������������������
�����������������������������������������������
���������������������������������������������
M8-1.25
M10-1.5
M12-1.75
M14-2
12
24
41
66
103
131
22
32
44
63
76
111
177
280
354
������
�������
��
������
�������
�������
123
199
258
M16-2
�������������
Thank you for choosing Grizzly!
COPYRIGHT © AUGUST, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE
REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN
APPROVAL OF GRIZZLY INDUSTRIAL, INC.
������� ������� �����
����������
M20-2.5
�������������
�������������
�������
#TR8543 PRINTED IN CHINA
|