MODEL H6441
HALOGEN LAMP
INSTRUCTIONS
Specifications
power requirements .................. grounded 110V
transformer ...................................................24V
halogen Bulb...........................................50 Watt
1. Only connect this lamp to a properly
grounded 110v power source.
2. Halogen lamps can become very hot.
Securely mount this lamp to a stable
surface that is safely away from com-
bustible materials of any kind.
Inventory
4
5
3. DO NOT replace the halogen bulb with
a wattage higher than what this lamp
is rated for. Doing this could cause the
lamp parts to melt or catch on fire.
3
6
4. To prevent electrical fires or electrocu-
tion, DO NOT allow any liquid to come
in contact with the lamp.
1
2
5. To avoid the risk of burns or electrocu-
tion, turn the lamp OFF, unplug it from
the power source, and allow it to cool
before making adjustments or perform-
ing maintenance.
figure 1. inventory and identification.
REF PART #
DESCRIPTION
1
2
3
4
5
6
PH6441001
PH6441002
PH6441003
PH6441004
PH6441005
PH6441006
POWER CORD & TRANSFORMER ASSY
MOUNTING BASE
6. Children or pets are unaware of the
hazards of a hot halogen lamp. DO NOT
allow children or pets near the lamp.
SUPPORTING ARM ASSEMBLY
LAMP HOUSING ASSEMBLY
SWITCH ASSEMBLY
HALOGEN BULB ASSY 50 WATT
7. To avoid burns or a fire, never handle
the hot lamp or discard a hot halogen
bulb.
8. The vents in the back of the lamp allow
heat to ventilate. Do not obstruct these
vents in anyway.
9. for safe operation, never operate this
lamp with missing or broken parts.
Copyright © MArCh, 2010 By grizzly industriAl, inC.
WARNING: NO PORTION Of THIS MANUAL MAy bE REPRODUCED IN ANy SHAPE
OR fORM WITHOUT THE WRITTEN APPROvAL Of GRIzzLy INDUSTRIAL, INC.
#ts12688 printed in ChinA
|