Quick Start Guide
K206-10U1 9.6" Liquid Crystal Display TV
This guide is designed as a reference to help you start using your LCD TV quickly.
Please refer to the User's Manual for more detailed installation and safety instructions.
Other Models
The information in this Quick Start Guide applies to all models shown below.
Front View
Rear View
Speaker
Speaker
DC 12V
4-IN-1
HEADPHONE
ANT
Volume
adjust
DC 12V
4-IN-1
HEADPHONE
ANT
Source
4-IN-1
Menu
Antenna/Cable TV
Channel
select
Power
indicator LED
DC 12V
Headphone jack
Remote IR sensor
Note: Do not unzip the plush cover. The plush
cover may only be removed by the qualified
personnel to service the product.
Making Connections
Connecting to Antenna/Cable TV
A/V and Channel Setup
Watching Broadcast or Cable TV
1. After you have made the appropriate power and source
connections, press the power button to turn on your television.
2. Press the SOURCE button to select TV.
1. Connect one end of the VHF/UHF
(Antenna) or CATV cable to ANT Jack
(VHF/UHF IN Jack) on the back of the
TV.
Antenna
D
C
1
2
V
4-IN-1
HEADPHONE
ANT
3. Press the MENU button on the
CH
CH
menu
SOURCE
control panel to enter the OSD menu.
4. Press the CH button to select the TV setting.
5. Press the MENU button.
VOL
VOL
ANT jack
(VHF/UHF IN Jack)
2. Connect the other end of the VHF/UHF
(Antenna) or CATV cable to the Antenna
or CATV socket.
DC 12V
4-IN-1
HEADPHONE
ANT
6. Press the CH or CH button to select TV/CATV.
Antenna/CATV
coaxial cable
Selecting A/V Sources
Connecting to a VCR,VCD, DVD Player, or Video Game Console
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
TV
AV
2. The cables are
1. The illustration presented
color-coded (black,
S-Video
2. Press the SOURCE button on the
control panel to select different source signals.
TV/CATV channel number, AV or S-Video
appear on the screen.
here shows you how to
VCR
red, white, and yellow).
connect your TV to a
Connect each color-
CH
menu
SOURCE
VOL
VOL
VCD
CH
VCR, VCD, DVD player
coded cable to
D
C
1
2
V
4-IN-1
HEADPHONE
ANT
or video game console.
DVD
the appropriate
connector on your
device.
4-IN-1 A/V jack
Auto Channel Setup
DC 12V
4-IN-1
HEADPHONE
ANT
B
R
W
Y
Video game console
1. Press the MENU button to enter the OSD menu.
S-Video
connector
B
2. Use the channel buttons on the control panel to select the “TV Setting” menu.
3. Press menu again until the “Auto Program” feature is selected.
4. Press CH to select yes.
R
W
Y
MENU
5. Press the
button.
4-IN-1 A/V cable
AV connectors
6. Your television will begin automatically memorizing the available channels.
Connecting the Power Adapter
Auto Program
Power outlet
1. Connect the power cord to the power
adapter as illustrated.
TV Setting
D
C
1
2
V
4-IN-1
HEADPHONE
ANT
AUTO MENU
SET SET
Channel
-
+
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
Program
AUTO
YES
Power cord
DC 12V
4-IN-1
HEADPHONE
ANT
NO
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
DC-IN
Power adapter
ENTER
Copyright 2004, Hannspree California, Inc. All rights reserved.
MAD-001093
|