HP Hewlett Packard Network Card Pro100B User Manual

Intel Ether Express Pro100B  
Adapter  
Installation Guide  
 
Contents  
Read This First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
3
Before installing the network adapter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
3
How to Forcibly Modify Resources Allocated to the Intel EtherExpress Pro100B PC  
adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
3
Connecting to a Novell NetWare 5.0 Server . . . . . . . . . . . . . . . . . . . .  
4
Microsoft Windows 95 SR2.5  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Known Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
4
4
5
Connecting to a Microsoft Windows NT 4.0 Server . . . . . . . . . . . . . .  
7
Microsoft Windows 95 SR2.5  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Known Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
7
7
8
Connecting to a Novell NetWare 4.11 Server . . . . . . . . . . . . . . . . . . .  
9
Microsoft Windows 95 SR2.5  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
9
9
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Known Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Connecting to a Novell NetWare 5.0 Server . . . . . . . . . . . . . . . . . . . 12  
Microsoft Windows NT 4.0 Workstation  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Connecting to a Microsoft Windows NT 4.0 Server . . . . . . . . . . . . . 14  
Microsoft Windows NT 4.0 Workstation  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Connecting to a Novell NetWare 4.11 Server . . . . . . . . . . . . . . . . . . 16  
Microsoft Windows NT 4.0 Workstation  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
1
 
Connecting to a Novell NetWare 5.0 Server. . . . . . . . . . . . . . . . . . . 18  
Microsoft Windows 98 2nd edition  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Connecting to a Microsoft Windows NT 4.0 Server. . . . . . . . . . . . . 19  
Microsoft Windows 98 2nd edition  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Connecting to a Novell NetWare 4.11 Server. . . . . . . . . . . . . . . . . . 20  
Microsoft Windows 98 2nd edition  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Connecting to a Windows NT 4.0 Server . . . . . . . . . . . . . . . . . . . . . 21  
Microsoft Windows for Workgroups v3.11  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Connecting to a Novell NetWare 4.11 Server. . . . . . . . . . . . . . . . . . 23  
Microsoft Windows for Workgroups v3.11  
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
2
 
Read This First  
1 Read This First  
Before installing the network adapter:  
If your OS is Windows 95 SR2.5, go into the BIOS setup and set PnP OS  
field to YES.  
If your OS is Windows NT 4.0, go into the BIOS setup and set PnP OS field  
to NO.  
If your OS is Windows 98 2nd edition, go into the BIOS setup and set PnP  
OS field to YES.  
If your OS is Windows for Workgroup 3.11, go into the BIOS setup and set  
PnP OS field to NO.  
How to Forcibly Modify Resources Allocated to the Intel EtherEx-  
press Pro100B PCI adapter:  
Do this only if needed and only if you are an advanced user.  
For advanced users only: In case of resource conflict, you can try to  
change the resources for the network adapter. To do this, turn the Vectra  
system power off, remove the network adapter and install it into a differ-  
ent PCI slot.  
3
 
Connecting to a Novell NetWare 5.0 Server  
Microsoft Windows 95 SR2.5  
2 Connecting to a Novell NetWare 5.0 Server  
Microsoft Windows 95 Requirements  
SR2.5  
Windows 95 SR2.5  
3.36.10  
Operating System  
Driver Version  
Driver File  
E100bnt.sys  
Novell NetWare 5.0 Server  
Client v3.1 for Windows 95/98  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and boot to Windows 95.  
4 Windows 95 will detect the network adapter as PCI Ethernet Controller.  
5 Insert the driver disk and click on Nextto continue the installation.  
6 When Windows 95 detects the updated driver, Intel PRO/100B Adapter  
(10/100), click on Finish.  
7 Click on OKwhen Windows prompts for the driver disk.  
8 Remove the driver disk and click on Yesto restart the system.  
9 After restarting the system, additional changes in the network properties,  
such as: workgroup name, computer name, etc. may be necessary. Ask  
your Network Administrator for more information. Restart the system if  
changes are made.  
10 From the location of the Novell Client v3.1 for Windows 95/98”  
installation files, execute Setup.exe.  
11 Click on Yesto accept the Novell Terms and Conditions.  
4
 
Connecting to a Novell NetWare 5.0 Server  
Microsoft Windows 95 SR2.5  
12 Select either Typicalor Customand click on Install. Typical  
Installation is normally chosen. Select Custom Installation only if you are  
an administrator or an advanced user. When prompted for options during  
installation, ask your Network Administrator for more information.  
13 Click on Rebootonce the Novell client installation is complete.  
Known Problems  
Problem 1  
Windows 95 will automatically select the driver (E100BNT5.SYS-NDIS 5  
driver) for the Intel PRO/100B PCI adapter, from the Intel driver diskette  
during installation. This driver will not successfully install in Microsoft  
Windows 95 SR2.5. A yellow exclamation mark in Device Manager will  
appear next to the NIC device.To fix this problem the E100BNT.SYS-NDIS 4  
driver must replace the NDIS 5 driver  
To fix this problem:  
1 Double-click on the NIC device in device manager.  
2 Double-click on Intel PRO/100B PCI adapter (TX).  
3 Select the Drivertab and click on Update Driver…”  
4 Select No, select driver from list.  
5 Insert the driver disk and click on Have Disk…”  
6 Type in the location of the driver disk and click on OK.  
7 Select Show all devices.  
8 Select 8255x-based PCI Ethernet adapter (10/100)from the list and  
click OK.  
9 Type in the location of the driver disk and click on OK.  
10 Click on Yeswhen prompted to keep an existing file.  
11 Click on Yesto restart the system.  
5
 
Connecting to a Novell NetWare 5.0 Server  
Microsoft Windows 95 SR2.5  
Problem 2  
Windows 95 will lose all network connections when thesystem comes out of  
suspend mode. This APM problem is known and acknowledged by Microsoft  
Q238/8/71.asp)  
To prevent this problem:  
1 From the Control Panel, double-click on the Powericon.  
2 On the Powertab, disable Allow Windows to manage power use on this  
computerand click on OK.  
3 Click on Yesto confirm the change.  
4 Click on Yesto restart the system.  
6
 
Connecting to a Microsoft Windows NT 4.0 Server  
Microsoft Windows 95 SR2.5  
3 Connecting to a Microsoft Windows NT 4.0 Server  
Microsoft Windows 95 Requirements  
SR2.5  
Windows 95 SR2.5  
3.36.10  
Operating System  
Driver Version  
Driver File  
E100bnt.sys  
Windows NT 4.0 Server  
Microsoft  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and boot to Windows 95.  
4 Windows 95 will detect the network adapter as PCI Ethernet Controller.  
5 Insert the driver disk and click on Nextto continue the installation.  
6 When Windows 95 detects the updated driver, Intel PRO/100B Adapter  
(10/100), click on Finish.  
7 Click on OKwhen Windows prompts for the driver disk.  
8 Remove the driver disk and click on Yesto restart the system.  
9 After restarting the system, additional changes in the network properties,  
such as: workgroup name, computer name, etc. may be necessary. Ask  
your Network Administrator for more information. Restart the system if  
changes are made.  
7
 
Connecting to a Microsoft Windows NT 4.0 Server  
Microsoft Windows 95 SR2.5  
Known Problems  
Problem 1  
Windows 95 will automatically select the driver (E100BNT5.SYS-NDIS 5  
driver) for the Intel PRO/100B PCI adapter, from the Intel driver diskette  
during installation. This driver will not successfully install in Microsoft  
Windows 95 SR2.5. A yellow exclamation mark in Device Manager will appear  
next to the NIC device. To fix this problem the E100BNT.SYS-NDIS 4 drive  
must replace the NDIS 5 driver.  
To fix this problem:  
1 Double-click on the NIC device in device manager.  
2 Double-click on Intel PRO/100B PCI adapter (TX).  
3 Select the Drivertab and click on Update Driver…”  
4 Select No, select driver from list.  
5 Insert the driver disk and click on Have Disk…”  
6 Type in the location of the driver disk and click on OK.  
7 Select Show all devices.  
8 Select 8255x-based PCI Ethernet adapter (10/100)from the list and click  
OK.  
9 Type in the location of the driver disk and click on OK.  
10 Click on Yeswhen prompted to keep an existing file.  
11 Click on Yesto restart the system.  
Problem 2  
Windows 95 will lose all network connections when the system comes out o  
suspend mode. This APM problem is known and acknowledged by Microsoft  
Q238/8/71.asp)  
To prevent this problem:  
1 From the Control Panel, double-click on the Powericon.  
2 On the Powertab, disable Allow Windows to manage power use on this  
computerand click on OK.  
3 Click on Yesto confirm the change.  
4 Click on Yesto restart the system.  
8
 
Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows 95 SR2.5  
4 Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows 95 Requirements  
SR2.5  
Windows 95 SR2.5  
3.36.10  
Operating System  
Driver Version  
Driver File  
E100bnt.sys  
Novell NetWare 4.11 Server  
Client v3.1 for Windows 95/98  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and boot to Windows 95.  
4 Windows 95 will detect the network adapter as PCI Ethernet Controller.  
5 Insert the driver disk and click on Nextto continue the installation.  
6 When Windows 95 detects the updated driver, Intel PRO/100B Adapter  
(10/100), click on Finish.  
7 Click on OKwhen Windows prompts for the driver disk.  
8 Remove the driver disk and click on Yesto restart the system.  
9 After restarting the system, additional changes in the network properties,  
such as: workgroup name, computer name, etc. may be necessary. Ask  
your Network Administrator for more information. Restart the system if  
changes are made.  
10 From the location of the Novell Client v3.1 for Windows 95/98”  
installation files, execute Setup.exe.  
11 Click on Yesto accept the Novell Terms and Conditions.  
9
 
Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows 95 SR2.5  
12 Select either Typicalor Customand click on Install. Typical  
Installation is normally chosen. Select Custom Installation only if you are  
an administrator or an advanced user. When prompted for options during  
installation, ask your Network Administrator for more information.  
13 Click on Rebootonce the Novell client installation is complete.  
Known Problems  
Problem 1  
Windows 95 will automatically select the driver (E100BNT5.SYS-NDIS 5  
driver) for the Intel PRO/100B PCI adapter, from the Intel driver diskette  
during installation. This driver will not successfully install in Microsoft  
Windows 95 SR2.5. A yellow exclamation mark in Device Manager will  
appear next to the NIC device. To fix this problem the E100BNT.SYS-NDIS  
4 driver must replace the NDIS 5 driver.  
To fix this problem:  
1 Double-click on the NIC device in device manager.  
2 Double-click on Intel PRO/100B PCI adapter (TX).  
3 Select the Drivertab and click on Update Driver…”  
4 Select No, select driver from list.  
5 Insert the driver disk and click on Have Disk…”  
6 Type in the location of the driver disk and click on OK.  
7 Select Show all devices.  
8 Select 8255x-based PCI Ethernet adapter (10/100)from the list and  
click OK.  
9 Type in the location of the driver disk and click on OK.  
10 Click on Yeswhen prompted to keep an existing file.  
11 Click on Yesto restart the system.  
10  
 
Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows 95 SR2.5  
Problem 2  
Windows 95 will lose all network connections when the system comes out of  
suspend mode. This APM problem is known and acknowledged by Microsoft  
Q238/8/71.asp)  
To prevent this problem:  
1 From the Control Panel, double-click on the Powericon.  
2 On the Powertab, disable Allow Windows to manage power use on this  
computerand click on OK.  
3 Click on Yesto confirm the change.  
4 Click on Yesto restart the system.  
11  
 
Connecting to a Novell NetWare 5.0 Server  
Microsoft Windows NT 4.0 Workstation  
5 Connecting to a Novell NetWare 5.0 Server  
Microsoft Windows NT Requirements  
4.0 Workstation  
Windows NT 4.0 Workstation  
3.36.10  
Operating System  
Driver Version  
Driver File  
E100bnt.sys  
Novell NetWare 5.0 Server  
Client v4.6 for Windows NT  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and boot to Windows NT.  
4 Log into Windows NT with administrator privileges.  
5 The following steps are based on a first-time installation of Networking on  
the system. Adding a NIC to a previously installed Networking has some  
minor differences. Ask your administrator for more information.  
6 Open the Network Propertieswindows and agree to install Windows  
NT Networking.  
7 With Wired to the Networkchecked, click on Next.  
8 Click on the option to Select from list…” then on Have Disk…”.  
9 Insert the driver disk and click on OK.  
10 With Intel Pro Adapterhighlighted, click on OK.  
11 With the Intel Pro Adapterlisted in the Network Adapters:window,  
click on Next.  
12 Select all the applicable network protocols and click on Next.  
13 At the Network Services:prompt, accept the default settings and click  
on Next.  
12  
 
Connecting to a Novell NetWare 5.0 Server  
Microsoft Windows NT 4.0 Workstation  
14 Complete the network card installation by clicking on Next.  
15 Type in the path to your Windows NT files and click Continue.  
16 If TCPIP was one of the protocols selected, you will be prompted for some  
TCPIP information. Your Network Administrator can provide you with  
this information.  
17 Accept the default entries at the Show Bindings for:windows and click  
on Next.  
18 When Windows NT is now ready to start the network…” window appears,  
click on Next.  
19 Specify your Computer Name, Workgroup or Domain Name and click  
onNext.  
20 Click on Finishwhen the Network has been installed on this computer”  
message appears.  
21 Remove the driver disk and select Yeswhen prompted to restart your  
computer.  
22 Log onto Windows NT Workstation with administrator privileges.  
23 From the location of the Novell Client v4.6 for Windows NTinstallation  
files, execute Winsetup.exe.  
24 Select the Language of Installation and click on it.  
25 Click on Windows NT Client.  
26 Select either Typicalor Customand click on Install. Typical  
Installation is normally chosen. Select Custom Installation only if you are  
an administrator or an advanced user. When prompted for options during  
installation, ask your Network Administrator for more information.  
27 Click on Yesto agree with the Novell Terms and Conditions to proceed  
with the installation.  
28 Click on Yesto replace the previous GINA (Graphical Identification and  
Authentication) authenticator with the Novell Client for Windows NT  
GINA authenticator.  
29 Click on Rebootto restart the system once the installation is complete.  
30 Log onto Windows NT Workstation with administrator privileges and re-  
install the current service pack.  
13  
 
Connecting to a Microsoft Windows NT 4.0 Server  
Microsoft Windows NT 4.0 Workstation  
6 Connecting to a Microsoft Windows NT 4.0 Server  
Microsoft Windows NT Requirements  
4.0 Workstation  
Windows NT 4.0 Workstation  
3.36.10  
Operating System  
Driver Version  
Driver File  
E100bnt.sys  
Windows NT 4.0 Server  
Microsoft  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and boot to Windows NT.  
4 Log into Windows NT with administrator privileges.  
5 The following steps are based on a first-time installation of Networking on  
the system. Adding a NIC to a previously installed Networking has some  
minor differences. Ask your administrator for more information.  
6 Open the Network Propertieswindows and agree to install Windows  
NT Networking.  
7 With Wired to the Networkchecked, click on Next.  
8 Click on the option to Select from list…” then on Have Disk…”.  
9 Insert the driver disk and click on OK.  
10 With Intel Pro Adapterhighlighted, click on OK.  
11 With the Intel Pro Adapterlisted in the Network Adapters:window,  
click on Next.  
12 Select all the applicable network protocols and click on Next.  
13 At the Network Services:prompt, accept the default settings and click  
on Next.  
14  
 
Connecting to a Microsoft Windows NT 4.0 Server  
Microsoft Windows NT 4.0 Workstation  
14 Complete the network card installation by clicking on Next.  
15 Type in the path to your Windows NT files and click Continue.  
16 If TCPIP was one of the protocols selected, you will be prompted for some  
TCPIP information. Your Network Administrator can provide you with  
this information.  
17 Accept the default entries at the Show Bindings for:windows and click  
on Next.  
18 When Windows NT is now ready to start the network…” window appears,  
click on Next.  
19 Specify your Computer Name, Workgroup or Domain Name and click  
onNext.  
20 Click on Finishwhen the Network has been installed on this computer”  
message appears.  
21 Remove the driver disk and select Yeswhen prompted to restart your  
computer.  
22 Log onto Windows NT Workstation with administrator privileges and re-  
install the current service pack.  
15  
 
Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows NT 4.0 Workstation  
7 Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows NT Requirements  
4.0 Workstation  
Windows NT 4.0 Workstation  
3.36.10  
Operating System  
Driver Version  
Driver File  
E100bnt.sys  
Novell NetWare 4.11 Server  
Client v4.6 for Windows NT  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and boot to Windows NT.  
4 Log into Windows NT with administrator privileges.  
5 The following steps are based on a first-time installation of Networking on  
the system. Adding a NIC to a previously installed Networking has some  
minor differences. Ask your administrator for more information.  
6 Open the Network Propertieswindows and agree to install Windows  
NT Networking.  
7 With Wired to the Networkchecked, click on Next.  
8 Click on the option to Select from list…” then on Have Disk…”.  
9 Insert the driver disk and click on OK.  
10 With Intel Pro Adapterhighlighted, click on OK.  
11 With the Intel Pro Adapterlisted in the Network Adapters:window,  
click on Next.  
12 Select all the applicable network protocols and click on Next.  
13 At the Network Services:prompt, accept the default settings and click  
on Next.  
16  
 
Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows NT 4.0 Workstation  
14 Complete the network card installation by clicking on Next.  
15 Type in the path to your Windows NT files and click Continue.  
16 If TCPIP was one of the protocols selected, you will be prompted for some  
TCPIP information. Your Network Administrator can provide you with  
this information.  
17 Accept the default entries at the Show Bindings for:windows and click  
on Next.  
18 When Windows NT is now ready to start the network…” window appears,  
click on Next.  
19 Specify your Computer Name, Workgroup or Domain Name and click  
onNext.  
20 Click on Finishwhen the Network has been installed on this computer”  
message appears.  
21 Remove the driver disk and select Yeswhen prompted to restart your  
computer.  
22 Log onto Windows NT Workstation with administrator privileges.  
23 From the location of the Novell Client v4.6 for Windows NTinstallation  
files, execute Winsetup.exe.  
24 Select the Language of Installation and click on it.  
25 Click on Windows NT Client.  
26 Select either Typicalor Customand click on Install. Typical  
Installation is normally chosen. Select Custom Installation only if you are  
an administrator or an advanced user. When prompted for options during  
installation, ask your Network Administrator for more information.  
27 Click on Yesto agree with the Novell Terms and Conditions to proceed  
with the installation.  
28 Click on Yesto replace the previous GINA (Graphical Identification and  
Authentication) authenticator with the Novell Client for Windows NT  
GINA authenticator.  
29 Click on Rebootto restart the system once the installation is complete.  
30 Log onto Windows NT Workstation with administrator privileges and re-  
install the current service pack.  
17  
 
Connecting to a Novell NetWare 5.0 Server  
Microsoft Windows 98 2nd edition  
8 Connecting to a Novell NetWare 5.0 Server  
Microsoft Windows 98 Requirements  
nd  
2 edition  
nd  
Windows 98 2 edition  
Operating System  
Driver Version  
Driver File  
3.37.07  
E100bnt.sys  
Novell NetWare 5.0 Server  
Client v3.1 for Windows 95/98  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and boot to Windows 98.  
4 Windows 98 will detect the network adapter as Intel PRO/100B PCI  
Adapterduring start up and install the OS embedded driver.  
5 Click on Yeswhen Windows 98 prompts to restart the system.  
6 After restarting the system, additional changes in the network properties,  
such as: workgroup name, computer name, etc. may be necessary. Ask  
your Network Administrator for more information. Restart the system if  
changes are made.  
7 From the location of the Novell Client v3.1 for Windows 95/98”  
installation files, execute Setup.exe.  
8 Click on Yesto accept the Novell Terms and Conditions.  
9 Select either Typicalor Customand click on Install. Typical  
Installation is normally chosen. Select Custom Installation only if you are  
an administrator or an advanced user. When prompted for options during  
installation, ask your Network Administrator for more information.  
10 Click on Rebootonce the installation is complete.  
18  
 
Connecting to a Microsoft Windows NT 4.0 Server  
Microsoft Windows 98 2nd edition  
9 Connecting to a Microsoft Windows NT 4.0 Server  
Microsoft Windows 98 Requirements  
nd  
2 edition  
nd  
Windows 98 2 edition  
Operating System  
Driver Version  
Driver File  
3.37.07  
E100bnt.sys  
Windows NT 4.0 Server  
Microsoft  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and boot to Windows 98.  
4 Windows 98 will detect the network adapter as Intel PRO/100B PCI  
Adapterduring start up and install the OS embedded driver.  
5 Click on Yeswhen Windows 98 prompts to restart the system.  
6 After restarting the system, additional changes in the network properties,  
such as: workgroup name, computer name, etc. may be necessary. Ask  
your Network Administrator for more information. Restart the system if  
changes are made.  
19  
 
Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows 98 2nd edition  
10 Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows 98 Requirements  
nd  
2 edition  
nd  
Windows 98 2 edition  
Operating System  
Driver Version  
Driver File  
3.37.07  
E100bnt.sys  
Novell NetWare 4.11 Server  
Client v3.1 for Windows 95/98  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and boot to Windows 98.  
4 Windows 98 will detect the network adapter as Intel PRO/100B PCI  
Adapterduring start up and install the OS embedded driver.  
5 Click on Yeswhen Windows 98 prompts to restart the system.  
6 After restarting the system, additional changes in the network properties,  
such as: workgroup name, computer name, etc. may be necessary. Ask  
your Network Administrator for more information. Restart the system if  
changes are made.  
7 From the location of the Novell Client v3.1 for Windows 95/98”  
installation files, execute Setup.exe.  
8 Click on Yesto accept the Novell Terms and Conditions.  
9 Select either Typicalor Customand click on Install. Typical  
Installation is normally chosen. Select Custom Installation only if you are  
an administrator or an advanced user. When prompted for options during  
installation, ask your Network Administrator for more information.  
10 Click on Rebootonce the installation is complete.  
20  
 
Connecting to a Windows NT 4.0 Server  
Microsoft Windows for Workgroups v3.11  
11 Connecting to a Windows NT 4.0 Server  
Microsoft Windows for Requirements  
Workgroups v3.11  
Windows for Workgroups 3.11  
Operating System  
Driver Version  
Driver File  
3.12.00  
E100B.386  
Windows NT 4.0 Server  
Microsoft  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and start in MS-DOS mode.  
4 Start Windows for Workgroups.  
5 After Windows loads, open the NetworkProgram Group and double-  
click on Network Setup.  
6 Click on the Networksbutton in the Network Setupdialog box.  
7 Select Install Microsoft Windows Networkoption and click OK.  
8 Click on the Driversbutton from the Network Setupdialog box and  
click on Add Adapter.  
9 Click OKto accept the default choice of Unlisted or Updated Network  
Adapter.  
10 Insert the driver disk and type the path to the drivers in the Install  
Driverdialog box and click OK.  
11 Click OKto accept the default choice of Intel PRO 100+ PCI Adapter.  
12 Accept the applicable network protocols, and then click on Close.  
Contact your network administrator if you do not have the required  
information.  
21  
 
Connecting to a Windows NT 4.0 Server  
Microsoft Windows for Workgroups v3.11  
13 Click OKat the Network Setupdialog box.  
14 If needed, enter changes to the Microsoft Windows Network Names”  
dialog box and click OK.  
15 Windows will prompt for the location of several files. Type the path to the  
file locations and click OK. This step will be repeated several times until  
all of the files Windows needs have been copied.  
16 Click OKon the next dialog box indicating that the CONFIG.SYS,  
AUTOEXEC.BAT, and SYSTEM.INI have been modified.  
17 To complete the installation, remove the driver disk and click on Restart  
Computer.  
22  
 
Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows for Workgroups v3.11  
12 Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows for Requirements  
Workgroups v3.11  
Windows for Workgroups 3.11  
Operating System  
Driver Version  
Driver File  
4.39  
E100b.lan  
Novell NetWare 4.11 Server  
Client 2.71 for DOS and Win3.x  
Server OS  
Client OS  
Procedure  
1 With the HP Vectra turned off, install the network adapter into a PCI slot.  
2 Connect the network cable to the newly installed network adapter.  
3 Power on the machine and start in MS-DOS mode.  
4 Start Windows for Workgroups.  
5 From the location of the NetWare Client v2.71 for DOS and Windows  
3.1xinstallation files, execute SETUP.EXEin Windows.  
(INSTALL.EXEmay also be executed in MS-DOS to install the client  
software, but the steps vary a little). When prompted for options during  
installation, ask your Network Administrator for more information.  
6 Click on Yesto accept the Novell license agreement.  
7 Click on Nextto continue installation.  
8 Select which optional modules you want to install and click Next  
9 Type in the path of the destination directory of the Novell client files and  
click Next”  
10 Click on Begin Copyto start copying the client files.  
11 Select the letter for the First Network Driveand click Next.  
12 Select the Program Group Nameyou want the client software installed  
in and click Next.  
23  
 
Connecting to a Novell NetWare 4.11 Server  
Microsoft Windows for Workgroups v3.11  
13 Insert the driver disk and click on Have Disk…” when prompted for  
drivers.  
14 Type in the location of the 32-bit LAN driver and click Add.  
15 Click Nextto continue with the installation.  
16 Modify the LAN adapter settings if needed and click Next.  
17 Type in the following information now: Preferred Tree, Context, and  
Preferred Server and click Next.  
18 Select the protocols you want to use and click Next.  
19 When the installation is completed, remove the driver disk and click on  
Finishand restart the computer.  
20 You may login to a server from the DOS prompt or load Windows for  
Workgroups v3.11 and use the NetWare User Toolsfrom the Novell  
Clientfolder to login to a server (If you do not have the required  
information, contact your network administrator).  
24  
 
Version Number Rev 2.  
December 1999  
 

Greenway Home Products Indoor Fireplace MEF2021WL User Manual
Greenway Home Products Indoor Fireplace MM281COK User Manual
Grizzly Biscuit Joiner G4815 User Manual
Grizzly Sander G0449 User Manual
Groupe SEB USA T FAL Iron GV6500 User Manual
Haier Dishwasher DW15 PFE2 User Manual
Harbor Freight Tools Air Compressor 47065 User Manual
Harbor Freight Tools Musical Toy Instrument 95641 User Manual
Harman Kardon Headphones ep720 User Manual
HP Hewlett Packard Water Pump 5660 97 User Manual