Harbor Freight Tools Headphones 66121 User Manual

WIreless  
66121  
HeadpHones  
InstructIons and precautIons  
®
distributed exclusively by Harbor Freight tools .  
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Visit our website at: http://www.harborfreight.com  
saVe tHese InstructIons. read all  
precautIons and InstructIons.  
©
®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this document or any artwork contained  
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams  
within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly  
from the product described herein. Tools required for assembly and service may not be included.  
For technical questions or replacement parts, please call 1-800-444-3353.  
specIFIcatIons  
assemblY/setup  
1.  
2.  
Turn the ON/OFF Switch “OFF” on both the  
Transmitter, and Headphones. Slide open the  
Battery Compartment Cover on the Left Ear-  
piece and, observing correct polarity, insert 2 -  
AAA batteries (not supplied). Slide the Battery  
Compartment Cover closed.  
Headphones: 2 - AAA Batteries.  
Transmitter: 2 - AAA Batteries  
Batteries Not Supplied.  
Power Source  
Emitting Range 85 MHz  
unpackIng  
Open the Battery Compartment Cover on the  
base of the Transmitter. Observing correct  
polarity, insert 2 - AAA batteries (not supplied).  
Close the Battery Compartment Cover.  
When unpacking, check to make sure that the  
item is intact and undamaged. If any parts are miss-  
ing or broken, please call Harbor Freight Tools at the  
number shown on the cover of this document as soon  
as possible.  
operatIon InstructIons  
1.  
2.  
Plug the Standard Use Cable into the Audio-In  
Socket on the Transmitter.  
Important saFetY  
InFormatIon  
This product is not a toy. Do not allow children  
to play with or near this item.  
Plug the other end of the Standard Use Cable  
into the Audio-Out (Headphones Symbol)  
Socket on your TV, DVD, VCD, PC, or music  
system.  
1.  
2.  
3.  
Use for intended purpose(s) only.  
3.  
4.  
Slide the ON/OFF Switch on front of the Trans-  
mitter to ON, the Power Light will come on. To  
turn the power off, slide the Switch and the  
Power Light goes off.  
Inspect before use; do not use if parts are  
loose or damaged.  
4.  
Maintain product labels and nameplates.  
These carry important safety information. If  
unreadable or missing, contact Harbor Freight  
Tools for a replacement.  
Pull out the Antenna on the Headphones and  
turn on the Volume Control (also on the Head-  
phones), the Power Light will come on.  
5.  
This device complies with part 15 of the FCC  
Rules. Operation is subject to the following  
two conditions: (1) This device may not cause  
harmful interference, and (2) this device must  
accept any interference received, including in-  
terference that may cause undesired operation.  
note: Volume of the received sound is deter-  
mined by Volume control on both the Head-  
phones, and your audio system.  
5.  
After you are finished using the Wireless  
Headphones, turn off the Power to both the  
Transmitter and the Headphones. Replace  
the Headphones on Seat located on top of the  
Transmitter.  
 

Haier Washer Dryer HWM55 13S User Manual
Hamilton Beach Blender 70710 User Manual
HANNspree Flat Panel Television k212 10a1 User Manual
Harbor Freight Tools Greenhouse Kit 94241 User Manual
Harbor Freight Tools Planer 90310 User Manual
Honeywell Home Security System WSK 24 User Manual
HP Hewlett Packard Computer Hardware FSPCI64S User Manual
HP Hewlett Packard Laptop ZV5000 User Manual
HP Hewlett Packard Personal Computer 9096375NOV96528 User Manual
HP Hewlett Packard Printer Z3200 User Manual