Havis Shields Automobile Accessories C TCB 27 User Manual

INSTALL INSTRUCTIONS C-TCB-27  
DODGE RAM 1500 PICK-UP 2002-2007  
DODGE RAM 2500 & 3500 PICK-UP 2003-2007  
TOOLS REQUIRED:  
3/16” Allen wrench  
3/8” Standard Socket Set  
3/8” Metric Socket Set  
3/8” Ratcheting Wrench  
Powered drill w/ 3/16” drill bit  
Open-end wrench set  
HARDWARE:  
QTY DESCRIPTION  
PART #  
1
1
1
Pole support assembly  
Telescoping pole assembly  
Lag bolt ¼ x 1  
CM93071-27W  
CM93072-3  
GSM33060  
Always!  
Read all instructions before installing any Havis-Shields Equipment Corp products.  
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!  
Use hardware provided with install kit  
SUB ASSEMBLY:  
Telescoping pole  
assembly  
1. Confirm receipt of all hardware and components.  
2. Remove front inner and outer passenger seat bolts on  
vehicle.  
INSTALLATION:  
1. MOUNT C-TCB-27 INTO VEHICLE:  
Position pole support assembly on top of  
passenger seat base mount and align holes in  
pole support assembly with holes in seat base.  
Loosely attached factory seat bolts that were  
removed during sub assembly.  
Pole support  
assembly  
Tighten down factory passenger seat bolts and  
5/16-18-nylock nut holding side support brace  
to pole support assembly.  
Mount optional C-3090, computer-mounting  
platform, to telescoping pole assembly using  
hardware and instructions provided with  
C-3090.  
Location of  
passenger side factory  
seat base bolts  
C-TCB-27-INST-3-07  
 

Grindmaster Coffee Grinder AT 3WR User Manual
Grindmaster Coffeemaker OPOD User Manual
Haier Water Heater FCD JTHMG50 III FCD JTHMG60 III FCD JTHMG80 III FCD JTHMG100 III User Manual
Hamilton Beach Blender HBB250S User Manual
Harbor Freight Tools Drill 7528 User Manual
HP Hewlett Packard Air Cleaner 20 Feb User Manual
HP Hewlett Packard Switch AARTDZHTE 958000284008 User Manual
HP Hewlett Packard Wheelchair 4937A User Manual
Husqvarna Sewing Machine 870 QUILT User Manual
Hypertec Carrying Case 6101HY User Manual