Havis Shields Automobile Accessories C TIR3 UNV User Manual

INSTALL INSTRUCTIONS C-TIR3-UNV  
UNIVERSAL LICENSE PLATE BRACKET  
*FOR USE WITH WHELEN TIR3 SERIES LED LIGHTS*  
TOOLS REQUIRED:  
Screw driver set  
Power Drill w/drill bit set  
SUB ASSEMBLY:  
1. Remove license plate from vehicle.  
2. Determine which mount best suits your vehicle application, which is dependant upon vehicle  
type, license plate location and its surroundings. (For example: Ford Crown Victoria  
requires a “Horizontal or Vertical In” mount to accommodate reverse lights.)  
Note: Whelen TIR3 Series LED Lights are available with Horizontal and Vertical Light output. Lights with  
vertical output should not be mounted horizontal and visa versa.  
Horizontal Out  
Horizontal In  
19.68”W x 1.375”H  
12.43”W x 1.375”H  
12.43”W x 4.25”H  
Vertical In  
Vertical Out  
15.18”W x 4.25”H  
INSTALLATION:  
1. MOUNT C-TIR3-UNV:  
Line up holes in C-TIR3-UNV to license plate mounting holes.  
Attach to vehicle using license plate screws removed in sub assembly. For heavy-  
duty mounting, extra holes are provided.  
Mount Whelen TIR3 Series LED Lights to C-TIR3-UNV using supplied hardware.  
Determine location to drill hole for wires to be routed.  
Drill 5/16” holes in determined location and route wiring to switching location.  
Wire TIR3 Series LED Lights to switching according to manufactures specifications.  
C-TIR3-UNV-INST-8-04  
 

Graco Car Seat PD203827A User Manual
Hach Camcorder 6120118 User Manual
Hamilton Beach Toaster HTS450 User Manual
Harrington Hoists Personal Lift NER2 series User Manual
Heath Zenith Door 3003530 User Manual
Honeywell Ventilation Hood ER150 User Manual
HP Hewlett Packard Yard Vacuum HP8648A User Manual
IBM Stereo Amplifier PS1500 User Manual
IKEA Indoor Furnishings AA 35966 3 User Manual
Image Treadmill 831297572 User Manual