Havis Shields Automobile Parts C TCB 1 User Manual

INSTALL INSTRUCTIONS C-TCB-1  
TELESCOPING COMPUTER BASE  
1992-1997 CHEVROLET CAPRICE, 1997-2002 LUMINA &  
1995-2008 FORD CROWN VIC  
TOOLS REQUIRED:  
Ratcheting Wrench  
Standard & Metric Socket Set  
Power Drill  
Drill Bit Set  
HARDWARE:  
QTY DESCRIPTION  
PART #  
2
1
1
2
¼” x 3/4” Self tapping screw  
5/16-18 Nylock Nut  
5/16-18 x 1” Hex head bolt  
5/16” Flat Washers  
GSM33060-1  
GSM30017  
GSM33012  
GSM31006  
SUB ASSEMBLY:  
1. Confirm receipt of all parts.  
2. Loosen front and rear passenger seat bolts.  
Telescoping  
Pole  
Tighten last  
Lateral (forward)  
Brace Arm Assembly  
Pole Support  
Assembly  
Side Brace Arm  
Assembly  
will be under passenger’s legs.  
Slide under front  
passenger inboard  
seat bolt  
Slide under front  
passenger outboard  
INSTALLATION:  
seat bolt  
1. Slide base of the pole  
support  
assembly under the front inboard (closest to the transmission hump) seat base. Slide the side  
brace arm under the front outboard (closest to the door) seat base.  
2. Attach side and forward brace arms to pole support assembly with 5/16” x 1” screw. (Do not  
tighten yet). Align the holes of the seat base, the pole support assembly, side brace arm and  
floor holes. Firmly tighten all four seat bolts without over tightening.  
3. Using two ¼” x ¾” self tapping screws, drill holes and attach lateral (forward) brace arm to  
vehicle floor or transmission hump.  
4. Tighten the hex head screw that attaches the brace arms to the telescoping post when  
finished.  
C-TCB-1_INST_9-07  
 

Hamilton Beach Oven 31507 User Manual
Harbor Freight Tools Air Compressor 67847 User Manual
Harman Kardon DVD Player DVD22B User Manual
Harman Stereo Amplifier GT X424 User Manual
Health O Meter Scale 500KL User Manual
HP Hewlett Packard Printer Volume 23 User Manual
HP Hewlett Packard Switch Q11 2510 24 User Manual
Husqvarna Lawn Mower Z 42 User Manual
IBM CRT Television LC UXT3 User Manual
iHome Mouse IH M175ZR User Manual