INSTALLATION INSTRUCTIONS KK-K9-FAN
OPTIONAL FAN FOR K-9 TRANSPORTATION SYSTEMS
HARDWARE:
QTY DESCRIPTION
PART#
1
2
4
4
8
1
95 CFM 12 Volt Boxer Fan
Grill guard
8-32 x ½” Phillips Machine Screw
8-32-x ¾”Phillips Machine Screw
8-32 Keps Nuts
PRM97422
PRM97473
GSM33110
GSM33111
GSM30027
HS-WK-2
Wire Kit
INSTALLATION:
1. Fan location to be determined by installer/customer.
2. The fan is designed to mount in many various locations. It can be simply mounted on the upper
perforated section or a hole can be cut out in the ceiling or lower wall.
3. After location is determined, the fan and housing will go on the exterior side of the K9
compartment. Drill (4) 3/16” mounting holes and bolt assembly.
4. Wire to fan switch and 12 volt power source.
KK-K9-FAN-INST-4-05
|