INSTALL INSTRUCTIONS C-TCB-14
UNIVERSAL TELESCOPING COMPUTER BASE
TOOLS REQUIRED:
3/16” Allen wrench
Ratcheting Wrench
Standard Socket Set
Powered Drill (if necessary)
Drill Bit Set (if necessary)
HARDWARE:
QTY DESCRIPTION
PART #
1
1
4
4
4
Pole support assembly
Telescoping pole assembly
¼-20 Nylock nut
¼” Flat washer
¼ - 20 x ½” Hex head bolt
CM93071-14W
CM93072-14
GSM30016
GSM31005
GSM33000
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
SUB ASSEMBLY:
1. Confirm receipt of all hardware and components.
2. C-TCB-14 offers multiple mounting options.
a. Havis Shields extruded Trak Mount
b. Any flat surface with access to bolt.
3. Mounting option to be determined by installer.
Telescoping pole
assembly
Location to mount to
Trak or flat surface
¼-20 x ½” Hex head
bolts, washers & hex
nuts
Pole support
assembly
C-TCB-14_INST_8-07
|