S6065A1003/2001
LIQUID FLOW SWITCHES
SPECIFICATION DATA & MOUNTING INSTRUCTIONS
FEATURES
•
•
•
Cost-effective flow switches for HVAC applications.
High-capacity, fully-encapsulated NC/NO micro-switch.
A single type suitable for pipes with a diameter of 1 to 8".
COMMON SPECIFICATIONS
Switching capacity
Lifetime
15 (8) A, 24...250 Vac
50000 cycles at nominal load
Working temperature
-40...+85 °C at 90% rel. humidity,
non-condensing
Screw terminal, wire up to 1.5 mm2
Electrical connection
cable ∅ 6...9 mm
Protection class
Protection standard
Housing material
Accessories
I according to EN60730
IP65 according to EN60529
ABS and corrosion-protected steel
PA2 Paddle set
S6065A2001
MOUNTING
The S6065A1003 and S6065A2001 Liquid Flow Switches can
be mounted in any desired position far from elbows, valves,
and filters.
NOTE: The arrow on the housing must point downstream.
When using multiple paddles, the paddles must be
arranged in order of decreasing length downstream,
i.e. with the longest paddle facing the oncoming
liquid.
S6065A1003
GENERAL
The S6065A1003 and S6065A2001 Liquid Flow Switches are
designed for monitoring flow rates in pipes employed in HVAC
applications. They are suitable for monitoring flow in water,
oil, cooling circuits, and lubrication systems. The S6065A2001
is designed for monitoring aggressive liquids.
In the case of vertical pipes, reset the range to balance the
paddle weight. To prevent malfunction caused by impurities in
the medium, do not mount the device with the housing
pointing downwards.
See Table 1 for the reset and switch points for water. Data for
other media must be determined empirically.
MODELS
Specification
S6065A1003
S6065A2001
aggressive liquid
Flow medium
Mounting
non-aggressive liquid
Rp 1" (ISO7/1)
120 °C
Rp 1" (ISO7/1)
120 °C
Maximum pipe temperature
Pressure
11 bar
30 bar
Paddle material
Lever
1.4401
1.4401
yellow brass
yellow brass
113 x 70 x 65 mm
850 g
1.4404
Sensor body
Housing dimensions
Weight
1.4404
108 x 70 x 72 mm
850 g
Approvals
TÜV-approved
TÜV-approved
® U.S. Registered Trademark
EN0B-0314GE51 R01008
Copyright © 2008 Honeywell Inc. • All rights reserved
|