Honeywell Weather Radio TC150 User Manual

TABLE OF CONTENTS  
INTRODUCTION  
3
PRODUCT OVERVIEW  
4
REMOTE RAIN GAUGE  
REMOTE SENSOR  
BEFORE YOU BEGIN  
BATTERY INSTALLATION  
REMOTE TEMPERATURE SENSOR  
MAIN UNIT  
LOW BATTERY WARNING  
HOW TO USE THE TABLE STAND  
GETTING STARTED  
REMOTE AND INDOOR TEMPERATURES  
AUTO-SCANNING  
9
10  
11  
13  
14  
14  
14  
14  
15  
15  
16  
16  
17  
17  
19  
19  
19  
20  
22  
22  
23  
25  
26  
27  
Wireless Rain Gauge  
CHECKING REMOTE RAINFALL DATA  
MAXIMUM AND MINIMUM TEMPERATURE  
LOST COMMUNICATION  
TRANSMISSION COLLISION  
CALENDAR AND CLOCK DISPLAY MODES  
MANUAL SETTINGS  
ALARMS  
SNOOZE  
PRECAUTIONS  
SPECIFICATIONS  
FCC STATEMENT  
DECLARATION OF CONFORMITY  
STANDARD WARRANTY INFORMATION  
( TC150 )  
USER MANUAL  
2
HONEYWELL TC150, TS906 & TS13C MANUAL (ENG)  
SIZE: W65 X H105 (mm)  
BY WING TSUI 15/05/06  
INTRODUCTION  
PRODUCT OVERVIEW  
MAIN UNIT  
Thank you for selecting the Honeywell Wireless Rain  
Gauge. This device monitors and displays rainfall data  
along with the indoor/outdoor temperature from up to  
three remote locations.  
FEATURES  
• Wireless transmission of the rainfall data from the remote  
rain gauge to the main unit up to 100 feet  
(30 meters) away  
• Wireless transmission of the temperature from the remote  
temperature sensor to the main unit up to 100 feet  
(30 meters) away  
• Rainfall may be displayed in inches or mm  
• Programmable Rain Alarm  
In this package you will find:  
• One main unit (receiver)  
CH  
PM  
• 7 days of rain collection history  
• Built-in rain gauge installation level  
• Indoor and remote temperature display  
• Min/Max Memory for indoor/outdoor temperature  
• Hourly, daily and weekly rainfall history  
• Monitors temperature in up to 3 remote locations  
• Quartz clock with calendar  
• One remote rain gauge (transmitter)  
• Programmable Time Zones  
• Day of the week in English, German, French, Spanish or  
Italian  
• Dual crescendo alarm with snooze  
• Programmable Ice Warning Alarm  
• Wall mount or desktop option  
• One remote temperature sensor (transmitter) TS13C  
4
3
3
M
H
z
W
I
R
E
L
E
S
S
3
• Low battery indicator  
• LED backlight  
THERMO  
SENSOR  
Please keep this manual handy as you use your new  
item. It contains practical step-by-step instructions, as  
well as technical specifications and precautions you  
should know.  
3
4
 
REMOTE SENSOR  
FEATURES  
REMOTE RAIN GAUGE  
• Remote temperature transmission to the main unit via  
433 MHz signal  
• 100 feet (30 meters) transmission range without interference  
• LCD display of measured temperature  
• Three transmission (3) channels selection  
• Selection of the temperature display in Celsius or Fahrenheit  
• Case can be wall mounted using built-in hanger  
G
H
D
E
4
3
3
M
H
z
W
I
R
E
L
E
S
S
E
3
C
1
2
3
CHANNEL  
RESET  
˚C/˚F  
F
D
A
I
F
B
THERMO  
SENSOR  
D. Funnel-shaped top with battery compartment  
A. LED INDICATOR  
Contains battery compartment and rainfall counting  
electronics  
• Flashes once when the remote temperature sensor  
transmits a reading to the main unit.  
• Flashes twice when battery power is low.  
B. BATTERY COMPARTMENT  
• Holds two AA-size batteries  
E. Battery compartment  
Holds two AA-size batteries  
F. Screws  
Secure battery compartment cover  
G.Built-in leveler  
C. RESET  
• Resets all readings  
Allows leveling rain gauge on the surface  
H.Bucket see-saw mechanism  
Collects the rainfall in one of its containers and  
self-empties once full  
D. CHANNEL SWITCH  
• Selects the desired channel  
E. WALL-MOUNT RECESSED OPENING  
• Keeps the remote temperature sensor on the wall  
F. °C/ °F SELECTOR  
I. Protective screen  
Protects the rain gauge funnel from debris  
• Selects the temperature display in Celsius or Fahrenheit  
10  
9
BEFORE YOU BEGIN  
•The main unit must be placed indoors.  
We recommend using alkaline batteries for the remote  
NOTE:  
rain gauge, temperature sensor and main unit when  
temperatures are above 32°F (0°C). We recommend  
using lithium batteries for the temperature sensor when  
temperatures are below 32°F (0°C).  
Avoid using rechargeable batteries. (Rechargeable  
batteries cannot maintain correct power requirements).  
ALWAYS install batteries in the remote rain gauge and  
the remote temperature sensor before the main unit.  
Insert batteries before first use, matching the polarity in  
the battery compartment  
Press RESET in the remote temperature sensor after  
each battery change with a paper clip or similar tool.  
Remove protective plastic screen from LCD display (If  
any)  
During an initial setup, place the main unit close to the  
remote rain gauge and remote temperature sensor  
Important: Only after reception is established (the  
remote rainfall data and temperature will appear on the  
main unit’s display), you may position and mount the  
remote sensors (the rain gauge and the temperature  
sensor) and the main unit within the effective  
transmission range of 100 feet (30 meters).  
The remote rain gauge must be placed outdoors on the  
open area, away from the walls, fences and trees and level.  
It is important that excess precipitation can freely flow  
from the remote rain gauge.  
1. Avoid pressing any buttons on the main unit before the  
remote rainfall and temperature data are displayed.  
2. The effective operating range may be influenced by the  
surrounding building materials and how the receiver  
(main unit) and transmitters (remote rain gauge and  
emperature sensor) are positioned.  
3. Place the remote rain gauge and temperature sensor so  
that it faces the main unit (receiver), minimizing  
obstructions such as doors, walls, and furniture.  
4. Though the remote temperature sensors are  
weather-resistant, they should be placed away from  
direct sunlight, rain or snow. The best suggested  
location for the remote temperature sensor for outdoors  
is under the eave on the north side of the building.  
NOTE: When the temperature falls below freezing, the  
batteries in the remote rain gauge and outdoor remote  
temperature sensor may have reduced voltage supply and  
a shorter effective range. We recommend using lithium  
batteries at temperatures of 32°F (0°C) and below.  
We also recommend covering the remote rain gauge tightly  
with a plastic during the winter time or move it indoors.  
The remote temperature sensor can be placed indoors or  
outdoors, depending on the area where the  
temperature is intended to be measured. If you intend  
measuring outdoor temperature, place the remote  
temperature sensor outdoors.  
11  
12  
 
BATTERY INSTALLATION  
REMOTE RAIN GAUGE  
REMOTE TEMPERATURE SENSOR  
NOTE: Install the batteries; select the channel and  
temperature in C° or F° before mounting the remote  
temperature sensor.  
Unlock the funnel-shaped top on the rain gauge by  
turning both knobs on the sides in an anti-clockwise  
direction.  
Remove the screws from the battery compartment with  
a small Phillips screwdriver.  
Remove the funnel-shaped top lifting it off the rain  
gauge bucket.  
Remove 7 small screws from the battery compartment  
cover using a small Phillips screwdriver.  
Insert 2 “AA” size alkaline batteries (not included),  
matching the polarities as shown in the battery  
compartment.  
Replace the battery compartment door and secure the  
screws.  
Insert the funnel-shaped top into the rain gauge bucket  
and secure it into place by turning the knobs clockwise.  
Set the channel. The switch is located in the battery  
compartment. Channel 1 is typically selected if only one  
remote sensor is being used.  
Install 2 “AA” size alkaline batteries (not included)  
matching the polarities shown in the battery compartment.  
Replace the battery compartment door and secure the  
screws.  
Secure remote temperature sensor in the desired location.  
MAIN UNIT  
Open the battery compartment door.  
Install 2 batteries (UM-3 or “AA” size 1.5V) matching  
the polarity as shown in the battery compartment.  
Replace the battery compartment door.  
RAIN GAUGE PLACEMENT TIPS  
Make sure that the remote rain gauge is level – check if  
the ball bearing inside the bucket is at the midpoint of  
the leveler.  
LOW BATTERY WARNING  
A low-battery indicator [ ] will appear on the remote  
rainfall reading line and the indoor or remote temperature  
reading line of the main unit, warning that the corresponding  
batteries need replacement.  
Place the protective screen over the top to protect the  
rain gauge from the debris.  
Mount the rain gauge using mounting hardware provided.  
Make sure that the rain gauge is in open area where  
precipitation falls directly into the gauge’s bucket,  
ideally 2-3 feet above the ground.  
HOW TO USE THE TABLE STAND  
The main unit has a removable table stand that supports it  
on the flat surface.  
Attach table stand to the bottom of the main unit in the slots  
provided.  
The main unit can also be mounted on the wall using the  
recessed screw hole. The table stand must be removed prior  
to mounting. The remote temperature sensor can be similarly  
mounted or placed on a flat surface.  
13  
14  
GETTING STARTED  
NOTE: If the indoor or remote temperature goes above or  
After batteries are installed; remote temperature sensor will  
transmit temperature readings at about 45 second intervals.  
The remote rain gauge will transmit rainfall data at about  
183 second intervals. The main unit may take up to two  
minutes to receive the initial readings. Upon successful  
reception, the rainfall reading (0.00) will appear on the top  
line of the main unit’s display and the remote temperature  
will appear on the line below. The main unit will automatically  
update readings at 45-second intervals.  
below operating range stated in specifications, the main  
unit’s display will show dashes “  
AUTO-SCANNING  
Press and hold the CHANNEL button on the back on the  
main unit for 2 seconds – the icon “ ” will appear on the  
display’s middle line below the remote temperature channel  
number. All 3 remote temperatures will be displayed  
one-by-one automatically for 4 seconds each in the  
If no signals received from the remote temperature sensor  
within two minutes, dashes [  
following sequence: Channel 1, Channel 2 and Channel 3.  
To exit from scanning mode, press and hold the CHANNEL  
button (on the back) for 2 seconds, and the icon “ ” will  
disappear, returning the main unit to the default display mode.  
CHECKING REMOTE RAINFALL DATA  
The remote rainfall information line is located on the top  
line of the main unit’s display.  
The rain icon “ ” is located to the left of the rainfall reading  
and indicates the reception status from the remote rain gauge.  
There are three following types of the reception status that  
may be displayed:  
] will be displayed.  
Press and hold the front panel DOWN ( ) button on the  
main unit for two seconds or until Rain symbol will start  
flashing, to initiate a signal search for the remote rainfall.  
Press and hold the back panel DOWN ( ) button on the  
main unit for two seconds to initiate a signal search for the  
remote temperature.  
REMOTE AND INDOOR TEMPERATURES  
The remote temperature information is located on the  
middle line of the main unit’s display. The indoor temperature  
with the icon IN is located next to the remote temperature.  
The wave icon above the remote channel number indicates  
the reception status from the remote temperature sensor.  
There are three following types of the reception status that  
may be displayed:  
The unit is in searching mode  
Rainfall readings are  
securely registered  
The Unit is in searching mode  
No signals detected  
- - -  
Temperature readings are  
securely registered  
Press and hold the MODE button on the front panel to  
display the rainfall reading in inches or mm.  
˚F  
No signals.  
15  
16  
 
RAINFALL HISTORY  
The path between units is clear of obstacles. Shorten the  
distance if necessary.  
The rainfall history records will be automatically stored in  
the memory of the main unit. There are three historical  
records may be displayed – for the past hour, past day and  
past week.  
Fresh batteries are installed correctly in both remote  
temperature sensor and main unit.  
If there is no reception, please perform the following steps:  
Bring the main unit and remote temperature sensor close  
together.  
Remove four (4) small screws from the back of the remote  
temperature sensor with small Phillips screwdriver, and  
open the battery compartment.  
Remove the batteries from the battery compartment and  
reinstall them in the same manner. Remote sensor LED  
indicator will flash showing transmission of the signal.  
Remove the batteries from the main unit and reinstall  
them in the same manner.  
The remote temperature appeared on the main unit’s  
display will show that transmission is being received  
successfully.  
If the main unit display line for the remote rain gauge  
reading goes blank, press and hold the front DOWN  
To display any of available rainfall history reading, use any  
button on the front panel except the ALARM button. The  
display sequence is: LAST HOUR, LAST 24 HOURS, and  
LAST 7 DAYS.  
To clear the memory, press and hold MEMORY button on t  
he front panel for two seconds and all previously stored  
readings will be erased (all the historical records will  
display a default reading 0.00).  
MAXIMUM AND MINIMUM TEMPERATURE  
The maximum and minimum record of the indoor and  
remote temperatures will be automatically stored in the  
memory of the main unit.  
To display the minimum, maximum or the current reading  
press MEMORY button on the back panel.  
To clear the memory, press and hold MEMORY button on  
the back for two seconds and all previously stored readings  
will be erased.  
(
) button for 2 seconds to begin a new signal search.  
If the signal still isn’t received, please make sure that:  
The remote rain gauge is in its proper location.  
The distance between main unit and remote rain gauge is  
not over 100 feet (30meters).  
LOST COMMUNICATION  
If the main unit display line for the remote temperature  
sensor reading goes blank, press and hold the back  
The path between units is clear of obstacles. Shorten the  
distance if necessary.  
Fresh batteries are installed correctly in both remote rain  
gauge and main unit.  
DOWN (  
) button for 2 seconds to begin a new signal  
search. If the signal still isn’t received, please make sure  
that:  
The remote temperature sensor is in its proper location.  
The distance between main unit and remote temperature  
sensor is not over 100 feet (30meters).  
17  
18  
TRANSMISSION COLLISION  
ALARMS  
Signals from the other household devices such as wireless  
doorbells, home security systems, and entry control, may  
interfere with this product or cause temporary reception  
interruption. This is normal and will not affect the general  
performance of the product. The transmission and reception  
of the remote readings will resume once the interference  
subsides.  
HIGH RAIN ALARM  
The high rain alarm for the past 24 hours can be set and  
displayed at any time by pressing ALARM button on the  
front panel.  
To set the high rain alarm,  
Press the ALARM button on the front panel until the  
ALARM HI” will appear on the upper right corner of  
the rainfall information line.  
CALENDAR AND CLOCK DISPLAY MODES  
Date is displayed in month-date or date-month format. Each  
press of the MODE button on the back panel will toggle the  
clock modes between the time with seconds, time with the  
day, time zone and a calendar.  
MANUAL SETTINGS  
CLOCK  
Press and hold the ALARM button for 2 seconds or until  
the rainfall data digits will flash.  
Enter the rainfall amount you want to set the rain alarm  
for using the front panel UP ( ) or DOWN ( ).  
Press the ALARM button again to confirm and the high  
rain alarm will be set.  
NOTE: Press and hold the MODE button on the front panel  
to display the rainfall reading in inches or mm.  
Press and hold MODE button for 3 seconds: the language  
letters will flash.  
Press UP ( ) or DOWN ( ) to change flashing letters.  
After the first value is set, press MODE button again to  
move to the next value  
Continue setting temperature in Celsius or Fahrenheit,  
year, month, date, calendar format, 12 or 24 hour time  
format, hour and minutes.  
Press MODE for the last time to return to the default  
mode (time of day with seconds) after the last parameter  
is set.  
TIME ALARMS  
The Wireless Rain Gauge has three available time alarms –  
Weekday alarm (  
Alarm (Pre-Al).  
), Single alarm(  
) and Ice Warning  
S
W
If Weekday alarm is activated, it will sound at the set time  
and the alarm icon will flash Mondays through Fridays.  
If Single day alarm is activated, it will sound at the set  
time and the alarm icon will flash only for this specific  
day and will not activate on subsequent days.  
If Ice Warning Alarm is activated, in will sound at the set  
time and alarm icon will flash if the remote temperature  
for Channel One (1) will reach 35.6°F(+2°C) and below.  
TIME ZONE  
Select Time Zone setting mode by pressing MODE button  
until the word “ZONE” will appear to the left of time display  
Press and hold MODE button until flashing“0:00” digits  
will appear prompting to set the desired time zone in  
30 minutes intervals  
NOTE: Ice Warning Alarm can be set only if one or both  
of the Weekday or Single alarm are programmed.  
19  
20  
 
SETTING THE WEEKDAY AND SINGLE DAY  
ALARMS  
ACTIVATING THE ALARM  
Press ALARM ON/OFF button to enter into the alarms  
mode.  
Press ALARM button once to enter into the alarms  
setting mode. The default alarm is a Weekday alarm.  
Press DOWN ( ) to activate or UP ( ) to deactivate  
desired alarm. When alarms are activated, the  
corresponding icons will be displayed.  
The abbreviation “OFF” with a letter “  
” next to it  
W
will be displayed, if the alarm has not been set previously.  
Press and hold the ALARM button for two seconds. The  
hour digit will flash.  
SNOOZE  
When any alarm sounds, press the SNOOZE/LIGHT button  
to temporarily stop the alarm. After the SNOOZE/LIGHT is  
depressed, the alarm sound will resume in eight minutes.  
If the alarm is not disabled after that, it will sound for four  
more minutes and then will stop by itself.  
Enter the hour using back panel UP ( ) or DOWN ( ).  
Press the ALARM again. The minute digits will flash.  
Enter the minutes using UP ( ) or DOWN ( ).  
Press the ALARM button again to confirm and the  
weekday alarm time will be set.  
PRECAUTIONS  
This product is engineered to give you years of satisfactory  
service if handled carefully. Here are a few precautions:  
Set Single day alarm if desired in the same manner.  
SETTING THE ICE WARNING ALARM  
If Weekday or Single day alarm is set, the Ice Warning  
Alarm can be programmed.  
Do not immerse the units in water.  
Do not clean the units with abrasive or corrosive  
materials. They may scratch the plastic parts and corrode  
the electronic circuits.  
Press the back panel ALARM button once to enter into  
the Ice Warning Alarm setting mode. The abbreviation  
OFF” with a “PRE-AL” next to it will be displayed.  
Press and hold the back panel ALARM button for two  
seconds. The “30” number will flash, meaning that if  
selected, the alarm will sound 30 minutes earlier than the  
Weekday or Single alarm.  
Do not subject the product to excessive force, shock,  
dust, temperature, or humidity, which may result in  
malfunctions, shorter lifespan, damaged batteries, and  
damaged parts.  
Do not tamper with the units internal components. Doing  
so will invalidate the warranty and may cause damage.  
These units contain no user-serviceable parts.  
Use only fresh batteries. Do not mix new and old  
batteries.  
Read the user's manual thoroughly before operating the  
units.  
Enter the desired minutes from 15 to 90 minutes in  
15 minutes intervals, using UP ( ) or DOWN ( ).  
Press back panel ALARM button again to confirm and  
exit from the alarm setting mode.  
21  
22  
SPECIFICATIONS  
Remote Temperature Sensor  
Main Unit  
Remote Temperature  
TIME  
Proposed operating range with alkaline batteries:  
-20.0°C to + 70.0°C/-4.0°F to + 158°F  
Proposed operating range with lithium batteries:  
-38.8°C to + 70.0°C/-38.0°F to +158°F  
Temperature resolution: 0.1°C/0.2°F  
12/24 hour display in hh: mm format  
Date format: month-day or day-month format  
Day of the week is selectable in five languages (English, Spanish,  
French, German, Italian)  
Time zone manual adjustment  
Dual two-minute crescendo alarms with 8 minutes snooze  
Programmable ice warning alarm (Channel 1)  
WEATHER  
Rainfall  
Proposed operating range: 0 to 1999.9mm/0 to 78.74 inch  
Rainfall resolution: 0.04 inch (1mm)  
Indoor Temperature  
Proposed operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F  
Temperature resolution: 0.1°C/0.2°F  
User-selectable (°F or °C) temperature display  
LED backlight  
Low battery indicator  
Wall Mount or Desktop option  
Low battery indicator  
RF transmission frequency: 433 MHz  
Maximum number of remote sensors: 3 (1 included)  
RF transmission range: maximum 100 feet (30 meters)  
Temperature transmission cycle: approximately 45 seconds  
Power  
Main unit: 2AAsize (UM-3) 1.5V batteries (not included)  
Remote sensor: 2AAsize (UM-3) 1.5V batteries (not included)  
Remote rain gauge: 2AAsize (UM-3) 1.5V batteries (not included)  
Dimensions  
Main unit: 2.75(L) x 5.43(H) x 1.02(D) inches  
Remote sensor: 2.37(L) x 4(H) x 1(D) inch  
Remote rain gauge: 6.49(L) x 6.89(H) x 4.72(D) inches  
Remote Rain Gauge  
Remote Rainfall Data  
Proposed operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F  
RF transmission frequency: 433 MHz  
RF transmission range: maximum 100 feet (30 meters)  
Rainfall transmission cycle: approximately 183 seconds  
23  
24  
 
DECLARATION OF CONFORMITY  
We  
FCC STATEMENT  
This device complies with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions: (1) This device may  
not cause harmful interference, and (2) This device must accept  
any interference received, including interference that may cause  
undesired operation.  
Name: Hideki Electronics, Inc.  
Address: 7865 SW Mohawk, Tualatin, OR 97062  
Telephone No.: 1-503-612-8395  
declare that the product  
Product No.: TC150  
Product Name: Wireless Rain Gauge  
Manufacturer: Hideki Electronics Ltd.  
Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk  
Road, Kwai Chung, New Territories, Hong Kong  
is in conformity with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions:  
This device may not cause harmful interference.  
This device must accept any interference received, including  
interference that may cause undesired operation.  
Warning: Changes or modifications to this unit not expressly  
approved by the party responsible for compliance  
could void the user’s authority to operate the  
equipment.  
NOTE: This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of  
the following measures:  
The information above is not to be used as a contact for  
support or sales. Please call our customer service hotline  
(refer to the Standard Warranty Information) for all  
injuries instead.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician  
for help.  
25  
26  
STANDARD WARRANTY INFORMATION  
This product is warranted from manufacturing defects for  
one year from date of retail purchase. It does not cover  
damages or wear resulting from accident, misuse, abuse,  
commercial use, or unauthorized adjustment and repair.  
Note that online product registration is required to ensure  
valid warranty protection.  
To register your product, go to our Company website  
Product Registration under the Customer Service menu.  
Should you require assistance with this product and its  
operation, please contact our Customer Service Hotline  
1(866) 443 3543.  
Please direct all returns to the place of the original purchase.  
Should this not be possible, contact Hideki Customer Service  
Hotline for assistance to obtain a Return Merchandise  
Authorization (RMA). Returns without a return authorization  
will be refused. Please retain your original receipt as you  
may be asked to provide a copy for proof of purchase.  
Copyright (2006) Hideki Electronics Inc. All Rights Reserved.  
The Honeywell Trademark is used under license from  
Honeywell Intellectual Properties Inc.  
Honeywell International Inc. makes no representations or  
warranties with respect to this product.  
All user manual contents and information are subject to  
change.  
27  
28  
 

GPX Speaker System HT362B User Manual
Grizzly Saw G0457 User Manual
Grundig DVR GDR 5550 HDD User Manual
Harbor Freight Tools Sander 93629 User Manual
Heat Glo LifeStyle Indoor Fireplace EXCLAIM 36H C User Manual
Honeywell Photo Scanner Xenon 1500 User Manual
Hotpoint Refrigerator 162D6746P002 User Manual
HP Hewlett Packard Wheelchair 16380A User Manual
Hughes Radio Antenna AN4 074 DF User Manual
Husky Power Supply HSK012HD User Manual