Iiyama Computer Monitor B1706S User Manual

USER MANUAL  
ENGLISH  
Thank you very much for choosing the iiyama  
LCD monitor.  
We recommend that you take a few minutes  
to read carefully through this brief but  
comprehensive manual before installing and  
switching on the monitor. Please keep this  
manual in a safe place for your  
future reference.  
 
Congratulations!  
This product is TCO Certified for Sustainable IT  
TCO Certified is an international third party sustainability certification for  
IT products. TCO Certified ensures that the manufacture, use and  
recycling of IT products reflect environmental, social and economic  
responsibility. Every TCO Certified product model is verified by an  
accredited independent test laboratory.  
This product has been verified to meet all the criteria in TCO Certified, including:  
Corporate Social Responsibility  
Socially responsible production - working conditions and labor law in manufacturing country  
Energy Efficiency  
Energy efficiency of product and power supply. Energy Star compliant, where applicable  
Environmental Management System  
Manufacturer must be certified according to either ISO 14001 or EMAS  
Minimization of Hazardous Substances  
Limits on cadmium, mercury, lead & hexavalent chromium including requirements for mercury-free  
products, halogenated substances and hazardous flame retardants  
Design for Recycling  
Coding of plastics for easy recycling. Limit on the number of different plastics used.  
Product Lifetime, Product Take Back  
Minimum one-year product warranty. Minimum three-year availability of spare parts. Product takeback  
Packaging  
Limits on hazardous substances in product packaging. Packaging prepared for recycling  
Ergonomic, User-centered design  
Visual ergonomics in products with a display. Adjustability for user comfort (displays, headsets)  
Acoustic performance protection against sound spikes (headsets) and fan noise (projectors, computers)  
Ergonomically designed keyboard (notebooks)  
Electrical Safety, minimal electro-magnetic Emissions  
Third Party Testing  
All certified product models have been tested in an independent, accredited laboratory.  
A detailed criteria set is available for download at www.tcodevelopment.com, where you can also  
find a searchable database of all TCO Certified IT products.  
TCO Development, the organization behind TCO Certified, has been an international driver in the  
field of Sustainable IT for 20 years. Criteria in TCO Certified are developed in collaboration with  
scientists, experts, users and manufacturers. Organizations around the world rely on TCO Certified  
as a tool to help them reach their sustainable IT goals. We are owned by TCO, a non-profit  
organization representing office workers. TCO Development is headquartered in Stockholm,  
Sweden, with regional presence in North America and Asia.  
For more information, please visit  
 
CE MARKING DECLARATION OF CONFORMITY  
This LCD monitor complies with the requirements of the EC/EU Directive 2004/108/EC “EMC  
Directive”, 2006/95/EC “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU  
“RoHS Directive”.  
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in  
residential areas, business and light industrial premises and small-scale enterprises, inside as  
well as outside of the buildings. All places of operation are characterised by their connection to  
the public low voltage power supply system.  
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands  
We reserve the right to change specications without notice.  
All trademarks used in this user manual are the property of their respective owners.  
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines  
for energy efciency.  
 
TABLE OF CONTENTS  
FOR YOUR SAFETY..........................................................................1  
SAFETY PRECAUTIONS..............................................................1  
SPECIAL NOTES ON LCD MONITORS.......................................3  
CUSTOMER SERVICE .................................................................3  
CLEANING....................................................................................3  
BEFORE YOU OPERATE THE MONITOR........................................4  
FEATURES....................................................................................4  
CHEKING THE CONTENTS OF THE PACKAGE.........................4  
FITTING AND REMOVAL OF BASE : ProLite B1706S.................5  
FITTING AND REMOVAL OF BASE : ProLite E1706S.................6  
CONTROLS AND CONNECTORS : ProLite B1706S ...................7  
CONTROLS AND CONNECTORS : ProLite E1706S ...................8  
CONNECTING YOUR MONITOR : ProLite B1706S.....................9  
CONNECTING YOUR MONITOR : ProLite E1706S...................10  
COMPUTER SETTING ...............................................................11  
ADJUSTING THE VIEWING ANGLE : ProLite E1706S ..............11  
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :  
ProLite B1706S ...........................................................................12  
PANEL ROTATION : ProLite B1706S..........................................12  
OPERATING THE MONITOR...........................................................13  
ADJUSTMENT MENU CONTENTS............................................14  
SCREEN ADJUSTMENTS..........................................................20  
POWER MANAGEMENT FEATURE...........................................23  
TROUBLE SHOOTING ....................................................................24  
RECYCLING INFORMATION...........................................................25  
APPENDIX ......................................................................................26  
SPECIFICATIONS : ProLite B1706S ..........................................26  
SPECIFICATIONS : ProLite E1706S ..........................................27  
DIMENSIONS : ProLite B1706S..................................................28  
DIMENSIONS : ProLite E1706S..................................................28  
COMPLIANT TIMING..................................................................29  
We recommend recycling of used product. Please contact your dealer or iiyama  
service center. Recycle information is obtained via the Internet, using the address:  
You can access the Web page of different countries from there.  
 
FOR YOUR SAFETY  
SAFETY PRECAUTIONS  
WARNING  
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE  
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the  
monitor and contact your dealer or iiyama service center immediately. Further use may be  
dangerous and can cause re or electric shock.  
NEVER REMOVE THE CABINET  
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of  
re or electric shock.  
DO NOT PUT ANY OBJECT INTO THE MONITOR  
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug  
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with  
any object inside may cause re, electric shock or damage.  
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE  
The monitor may cause an injury if it falls or is dropped.  
DO NOT USE THE MONITOR NEAR WATER  
Do not use where water may be splashed or spilt onto the monitor as it may cause re or electric  
shock.  
OPERATE UNDER THE SPECIFIED POWER SUPPLY  
Be sure to operate the monitor only with the specied power supply. Use of an incorrect voltage will  
cause malfunction and may cause re or electric shock.  
PROTECT THE CABLES  
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy  
objects on the cables. If damaged, the cables may cause re or electric shock.  
ADVERSE WEATHER CONDITIONS  
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in  
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it  
may cause electric shock.  
FOR YOUR SAFETY 1  
 
CAUTION  
INSTALLATION LOCATION  
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or  
smoky areas as it may cause re, electric shock or damage. You should also avoid areas where the  
sun shines directly on the monitor.  
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION  
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not  
place any heavy objects on the monitor, and that all cables are routed such that children may not  
pull the cables and possibly cause injury.  
MAINTAIN GOOD VENTILATION  
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause  
re. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.  
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the  
cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause re  
or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft  
material may also cause damage.  
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR  
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal  
cable is disconnected. If you do not disconnect them, it may cause re or electric shock.  
UNPLUG THE MONITOR  
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to  
avoid accidents.  
HOLD THE PLUG WHEN DISCONNECTING  
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable  
itself as this may cause re or electric shock.  
DO NOT TOUCH THE PLUG WITH WET HANDS  
Pulling or inserting the plug with wet hands may cause electric shock.  
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER  
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may  
damage your computer.  
CAREFUL! PROTECT YOUR HANDS AND FINGERS  
Be careful not to hurt your ngers or hands when you change the height or the angle.  
Injury can occur if care is not taken to avoid nger contact with the displays base when adjusting  
the height. (Just for height adjustable model.)  
DO NOT USE THE MONITOR FOR 24-HOURS CONTINUOUSLY  
The monitor is not designed to work for 24-hours continuously, do not use the monitor for 24-hours  
continuously.  
OTHERS  
ERGONOMIC RECOMMENDATIONS  
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.  
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)  
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour  
is recommended as looking at the screen continuously can cause eye strain.  
2 FOR YOUR SAFETY  
 
SPECIAL NOTES ON LCD MONITORS  
The following symptoms are normal with LCD monitors and do not indicate a problem.  
NOTE  
When you rst turn on the LCD monitor, the picture may not t in the display area  
  
because of the type of computer that is used. In this case, adjust the picture position  
to the correct position.  
Due to the nature of the backlight, the screen may icker during initial use. Turn off  
  
the Power Switch and then turn it on again to make sure the icker disappears.  
You may nd slightly uneven brightness on the screen depending on the desktop  
  
pattern you use.  
Due to the nature of the LCD screen, an afterimage of the previous screen may  
  
remain after switching the image, when the same image is displayed for hours. In  
this case, the screen is recovered slowly by changing the image or turning off the  
Power Switch for hours.  
Contact your dealer or iiyama service center for the backlight replacement when the  
  
screen is dark, ickering or not lighting up. Never attempt to replace it by yourself.  
CUSTOMER SERVICE  
The uorescent light used in the LCD monitor may have to be periodically replaced.  
  
NOTE  
For the warranty coverage on this component, please check with local iiyama  
service center.  
If you have to return your unit for service and the original packaging has been  
  
discarded, please contact your dealer or iiyama service center for advice or  
replacement packaging.  
CLEANING  
WARNING  
CAUTION  
NOTE  
If you drop any materials or liquids such as water into the monitor when cleaning,  
  
unplug the power cable immediately and contact your dealer or iiyama service center.  
For safety reasons, turn off the power switch and unplug the monitor before you  
  
clean it.  
To protect the LCD panel, do not scratch or rub the screen with a hard object.  
Never use any of the following strong solvents. These will damage the cabinet and  
  
the LCD screen.  
Spray-type cleaner  
Wax  
Thinner  
Benzine  
Acid or Alkaline solvent  
Abrasive cleaner  
Touching the cabinet with any product made from rubber or plastic for a long time  
  
may cause degeneration or loss of paint on the cabinet.  
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.  
Then wipe the cabinet with a soft dry cloth.  
CABINET  
LCD  
Periodic cleaning with a soft dry cloth is recommended.  
Don't use tissue paper etc. because these will damage the LCD screen.  
SCREEN  
FOR YOUR SAFETY 3  
 
BEFORE YOU OPERATE THE MONITOR  
FEATURES  
Supports Resolutions up to 1280 × 1024  
High Contrast 1000:1 (Typical) , ACR Function Available / Brightness 250cd/m2  
(Typical) / Quick Response Time 5ms (Typical)  
Digital Character Smoothing  
Automatic Set-up  
Stereo Speakers  
2 × 1W Stereo Speakers  
Plug & Play VESA DDC2B Compliant  
  
Windows® XP/Vista/7/8 Compliant  
Power Management (ENERGY STAR® VESA DPMS Compliant)  
Ergonomic Design: TCO Certied Compliant  
VESA Mounting Standard (100mm×100mm) Compliant  
Keyhole for Security Lock  
CHEKING THE CONTENTS OF THE PACKAGE  
The following accessories are included in your package. Check to see if they are enclosed with  
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional  
iiyama ofce.  
Power Cable*1  
Audio Cable  
D-Sub Signal Cable  
Stand-Base  
DVI-D Cable  
Stand*2  
  
Screw for stand xing*3  
Safety Guide  
Quick Start Guide  
  
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using  
a power supply higher than this rating, then a power cable with a rating of  
10A/250V must be used.However, all guarantees and warranties are void for any  
problems or damage caused by a power cable not supplied by iiyama.  
*2 Accessory for ProLite E1706S.  
CAUTION  
*3 Accessory for ProLite B1706S.  
4 BEFORE YOU OPERATE THE MONITOR  
 
FITTING AND REMOVAL OF BASE : ProLite B1706S  
The monitor is supplied complete with a stand-base. If you prefer to wall mount the monitor, please  
follow the instructions below to remove the stand-base. Be sure to include the stand with the monitor  
if it is necessary to return the unit.  
CAUTION  
Put the monitor on a stable surface. The monitor may cause injury or damage if it  
  
falls or is dropped.  
Do not give a strong impact to the monitor. It may cause damage.  
  
Unplug the monitor before removal or installation to avoid electric shock or damage.  
  
<Installation>  
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.  
Lay the monitor at on a table with front face down.  
A
Install the Stand-Base to the Monitor.  
B
C
Fix the Monitor with the Stand by the screw rmly, and the knob of the screw push down.  
Stand-Base  
Push-down knob  
Screw for  
Stand-Base fixing  
<Remove>  
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.  
A
Lay the monitor at on a table with front face down.  
Pull up the knob of the screws, and remove the screw and the Stand-Base.  
B
<Stopper pin>  
Please stand the monitor and then remove the  
stopper pin on the back of the stand slowly while  
pushing top face of the stand before you install the  
monitor. Careful attention is required as the monitor  
is sprung loaded and may expand quickly when  
removing it.  
Stopper pin  
BEFORE YOU OPERATE THE MONITOR 5  
 
FITTING AND REMOVAL OF BASE : ProLite E1706S  
CAUTION  
Install the stand on a stable surface. The monitor may cause injury or damage if it  
  
falls or is dropped.  
Do not give a strong impact to the monitor. It may cause damage.  
  
Unplug the monitor before installation to avoid electric shock or damage.  
  
<Installation>  
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.  
Lay the monitor at on a table with front face down.  
Hold the monitor and push the Stand.  
A
B
C
Hold the monitor and push the Stand-Base.  
Stand  
Stand-Base  
<Remove>  
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.  
A
Lay the monitor at on a table with front face down.  
Press the stopper at the bottom of the stand and remove the Stand-Base from the stand.  
Press the stopper at the back of the stand and remove the Stand from the monitor.  
B
C
Stopper  
Stand-Base  
Stand  
Stopper  
6 BEFORE YOU OPERATE THE MONITOR  
 
CONTROLS AND CONNECTORS : ProLite B1706S  
<Back>  
<Front>  
Power Switch (  
)
A
B
C
D
E
F
Menu / Select Button (MENU)  
+ / Volume Button ( + )  
- / ECO Button ( - )  
Auto Button (AUTO)  
Power Indicator  
NOTE Blue:  
Normal operation  
Orange: Power Management  
Speakers  
G
H
I
J
K
L
M
D-SUB mini 15pin Connector (D-SUB)  
DVI-D 24pin Connector (DVI-D)  
Cable Holder  
Audio Connector (AUDIO IN)  
AC Connector (AC IN)  
Keyhole for Security Lock  
NOTE  
You can fasten a security lock and cable to prevent the monitor from being removed  
without your permission.  
BEFORE YOU OPERATE THE MONITOR 7  
 
CONTROLS AND CONNECTORS : ProLite E1706S  
<Back>  
<Front>  
Power Switch (  
)
A
B
C
D
E
F
Menu / Select Button (MENU)  
+ / Volume Button ( + )  
- / ECO Button ( - )  
Auto Button (AUTO)  
Power Indicator  
NOTE  
Blue:  
Normal operation  
Orange: Power Management  
Speakers  
G
H
I
J
K
L
D-SUB mini 15pin Connector (D-SUB)  
DVI-D 24pin Connector (DVI-D)  
Audio Connector (AUDIO IN)  
AC Connector (AC IN)  
Keyhole for Security Lock  
NOTE  
You can fasten a security lock and cable to prevent the monitor from being removed  
without your permission.  
8 BEFORE YOU OPERATE THE MONITOR  
 
CONNECTING YOUR MONITOR : ProLite B1706S  
Ensure that both the computer and the monitor are switched off.  
Connect the computer to the monitor with the signal cable.  
Connect the monitor to the audio equipment with the Audio Cable for computer when using the  
audio features.  
A
B
C
Connect the Power Cable to the monitor rst and then to the power supply.  
Power of the monitor and the computer is turned on.  
D
E
The signal cables used for connecting the computer and monitor may vary with the type of  
computer used. An incorrect connection may cause serious damage to both the monitor and  
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.  
If a special cable is required please contact your local iiyama dealer or regional iiyama  
ofce.  
NOTE  
For connection to Macintosh computers, contact your local iiyama dealer or regional  
iiyama ofce for a suitable adaptor.  
Make sure you tighten the nger screws at each end of the signal cable.  
[Example of Connection]  
<Back>  
Power Cable  
(Accessory)  
D-Sub Signal Cable  
(Accessory)  
DVI-D Signal Cable  
(Accessory)  
Audio Cable (Accessory)  
Computer  
[ Collect Cables ]  
Put the cables through the cable holder.  
Collect cables at the back of the stand.  
A
B
BEFORE YOU OPERATE THE MONITOR 9  
 
CONNECTING YOUR MONITOR : ProLite E1706S  
Ensure that both the computer and the monitor are switched off.  
Connect the computer to the monitor with the signal cable.  
Connect the monitor to the audio equipment with the Audio Cable for computer when using the  
audio features.  
A
B
C
Connect the Power Cable to the monitor rst and then to the power supply.  
Power of the monitor and the computer is turned on.  
D
E
The signal cables used for connecting the computer and monitor may vary with the type of  
computer used. An incorrect connection may cause serious damage to both the monitor and  
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.  
If a special cable is required please contact your local iiyama dealer or regional iiyama  
ofce.  
NOTE  
For connection to Macintosh computers, contact your local iiyama dealer or regional  
iiyama ofce for a suitable adaptor.  
Make sure you tighten the nger screws at each end of the signal cable.  
[Example of Connection]  
<Back>  
Power Cable  
(Accessory)  
D-Sub Signal Cable  
(Accessory)  
DVI-D Signal Cable  
(Accessory)  
Audio Cable (Accessory)  
Computer  
10 BEFORE YOU OPERATE THE MONITOR  
 
COMPUTER SETTING  
Signal Timing  
Change to the desired signal timing listed on page 29: COMPLIANT TIMING.  
ADJUSTING THE VIEWING ANGLE : ProLite E1706S  
For optimal viewing it is recommended to look at the full  
face of the monitor.  
Hold the stand so that the monitor does not topple when  
you change the monitor’s angle.  
You are able to adjust the monitor’s angle up to 20  
degrees upward, 5 degrees downward.  
In order to ensure a healthy and relaxed body position  
when using the monitor at visual display workstations, it  
is recommended that the adjusted tilt angle should not  
exceed 10 degrees. Adjust the monitor’s angle to your  
20  
own preference.  
5
Do not touch the LCD screen when you change  
the angle. It may cause damage or break the  
LCD screen.  
NOTE  
Careful attention is required not to catch your  
ngers or hands when you change the angle.  
BEFORE YOU OPERATE THE MONITOR 11  
 
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1706S  
For optimal viewing it is recommended to position  
yourself directly opposite to the full face of the  
monitor, then adjust the monitor’s height and  
angle to your own preference.  
Hold the panel so that the monitor does not  
topple when you change the monitor’s height or  
angle.  
110mm  
You are able to adjust the monitor's height up to  
110mm, angle up to 170 degrees right and left,  
20 degrees upward.  
Do not touch the LCD screen when you  
change the height or the angle. It  
may cause damage or break the LCD  
screen.  
NOTE  
Careful attention is required not to  
catch your fingers or hands when you  
change the height or the angle.  
Injury can occur if care is not taken to  
avoid nger contact with the displays  
base when adjusting the height.  
Monitor  
Stand  
PANEL ROTATION : ProLite B1706S  
Adjust the mother’s height.  
Rotate the panel 90 degrees.  
Portrait: Turn clockwise.  
A
B
Landscape: Turn counter clockwise.  
Attempting to rotate without fully extending  
NOTE  
90°  
upward may cause damage to stand.  
Video card for portrait display will be required  
for rotating the image on the screen.  
Adjust the monitor’s angle to your preference.  
C
12 BEFORE YOU OPERATE THE MONITOR  
 
OPERATING THE MONITOR  
To create the best picture, your iiyama LCD monitor has been preset at the factory with the  
COMPLIANT TIMING shown on page 29. You are also able to adjust the picture by following  
the button operation shown below. For more detailed adjustments, see page 20 for SCREEN  
ADJUSTMENTS.  
Press the MENU Button to start the On Screen Display feature. There are additional  
Menu items which can be switched by using the + / - Buttons.  
Luminance  
Contrast  
Brightness  
Eco  
50  
50  
Off  
Standard  
ON  
Picture Mode  
ACR  
Select the Menu item which contains the adjustment icon relating to the adjustment  
you want to make. Press the MENU Button. Then, use the + / - Buttons to highlight  
the desired adjustment icon.  
B
Press the MENU Button again. Use the + / - Buttons to make the appropriate  
adjustment or setting.  
C
D
Press the AUTO Button to leave the menu, and the settings you just made would be  
automatically saved.  
For example, to correct for vertical position, select Menu item of Image Setup and then press  
the MENU Button. Then, select V.Position by using the + / - Buttons.  
An adjustment page appears after you press the MENU Button. Then, use the + / - Buttons  
to change the vertical position settings. The vertical position of the overall display should be  
changing accordingly while you are doing this.  
Press the AUTO Button lastly, it ends, any changes are saved in the memory.  
Image Setup  
Clock  
50  
50  
50  
50  
Phase  
H.Position  
V.Position  
NOTE  
When button operations are aborted during adjustment, On-Screen Display disappears when the  
  
time set for the Time out has passed. Also, the AUTO button can be used to return previous menu  
and turn off the On-Screen Display.  
Any changes are automatically saved in the memory when the On Screen Display disappears.  
  
Turning off the power should be avoided while using the Menu.  
Adjustments for H. / V. Position, Clock and Phase are saved for each signal timing. Except for  
  
these adjustments, all other adjustments have only one setting which applies to all signal timings.  
OPERATING THE MONITOR 13  
 
ADJUSTMENT MENU CONTENTS  
Luminance  
Luminance  
Contrast  
50  
50  
Brightness  
Eco  
Off  
Picture Mode  
ACR  
Standard  
ON  
Adjustment Item  
Problem / Option  
Button to Press  
Too dull  
Contrast  
Too intense  
Too dark  
Brightness *  
Eco  
Too bright  
Off  
Normal  
Brightness of back-light is reduced.  
Mode1  
Mode2  
Mode3  
Direct  
Brightness of back-light is reduced more than Mode1.  
Brightness of back-light is reduced more than Mode2.  
For general windows environment and monitor  
default setting.  
Standard  
Text  
For text editing and viewing in a word processing  
environment.  
Picture Mode  
For internet environment.  
Internet  
Game  
Movie  
Sport  
For PC game environment.  
For movie and video environment.  
For sport environment.  
On  
Off  
Increased Contrast Ratio  
Typical Contrast Ratio  
ACR  
NOTE  
ACR adjusts brightness according to the image, and improve the contrast ratio during  
move playing.  
Contrast, Brightness, sRGB, Eco and Picture Mode cannot be adjusted and selected  
while ACR is active.  
* Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too  
bright.  
Direct  
You can skip the Menu items and display an adjustment scale directly by using the following button  
operations.  
ECO: Press the - Button when the Menu is not displayed.  
  
14 OPERATING THE MONITOR  
 
Image Setup  
Image Setup  
Clock  
50  
50  
50  
50  
Only Analog Input  
Phase  
H.Position  
V.Position  
Adjustment Item  
Clock*  
Problem / Option  
Button to Press  
Too narrow  
Too wide  
Phase*  
To correct ickering text or lines  
Too left  
H. Position  
V. Position  
Too right  
Too low  
Too high  
* See page 20 for SCREEN ADJUSTMENTS.  
OPERATING THE MONITOR 15  
 
Color Temp.  
Color Temp.  
Mode1  
Gamma  
Color Temp.  
User-R  
Warm  
50  
50  
50  
User-G  
User-B  
Adjustment Item  
Problem / Option  
Button to Press  
Mode1  
Normal  
Gamma  
Mode2  
Mode3  
Dark  
High contrast  
User-R  
Too weak  
User  
User-G  
User-B  
Too strong  
Color Temp.  
Bluish white  
Cool  
Normal  
Warm  
sRGB  
Yellowish white  
Greenish white  
sRGB  
sRGB is an international standard which denes and unies the difference of color  
  
appearance between equipment.  
NOTE  
You can not adjust the Brightness, Contrast, Gamma and Eco during sRGB mode  
because those settings are locked.  
16 OPERATING THE MONITOR  
 
OSD Setup  
OSD Setup  
H.Position  
V.Position  
Timeout  
50  
50  
50  
Language  
English  
Adjustment Item  
Problem / Option  
Button to Press  
OSD is too left  
OSD is too right  
H.Position  
OSD is too low  
OSD is too high  
V.Position  
Timeout  
You can set the OSD display duration time  
between 5 and 60 seconds.  
Simplied Chinese  
Italian  
English  
Deutsch  
Français  
Español  
English  
German  
French  
Spanish  
Italiano  
Language  
Russian  
Japanese  
Portuguese Portuguese  
OPERATING THE MONITOR 17  
 
Others  
Others  
Reset  
Yes  
Signal Select  
Auto  
Information  
Resolution :  
H.Frequency :  
V.Frequency :  
800(H)600(V)  
38KHz  
60Hz  
Adjustment Item  
Problem / Option  
Button to Press  
Yes  
Factory-preset data is restored.  
Return to Menu.  
Reset  
No  
Auto  
Select the signal input automatically.  
Select the Analog input.  
D-sub  
DVI-D  
Signal Select  
Direct  
Select the Digital input.  
At selected Auto, you can switch the input source by pressing and holding of the AUTO  
Button for 2-3 seconds, However it will automatically be selected when just one source is  
using.  
NOTE  
In Power Management Mode input switching is disabled.  
Input source is xed, not selected automatically when D-sub and DVI-D which are selected.  
Displays information regarding the current input signal coming  
from the graphic card in your computer.  
Information  
NOTE See your graphic card user guide for more information  
about changing the resolution and refresh.  
Direct  
You can skip the Menu items and display an adjustment scale directly by using the following button  
operations.  
Signal Select: Pressing and holding of the AUTO Button for 2-3 seconds when the Menu is not  
  
displayed.  
18 OPERATING THE MONITOR  
 
Direct  
You can skip the Menu items and display an adjustment scale directly by using the following button  
operations.  
Volume: Press the + Button when the Menu is not displayed.  
  
Adjustment Item  
Problem / Option  
Button to Press  
Too soft  
Too loud  
Volume  
Auto Adjust: Press the Auto Button when the Menu is not displayed.  
  
Only Analog Input  
Adjustment Item  
Problem / Option  
Button to Press  
Adjust H. / V. Position, Clock and Phase automatically.  
Auto Adjust *  
* For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 20 for  
SCREEN ADJUSTMENTS.  
OSD Lock:  
  
Hold the MENU button and turn on the monitor when the monitor is power-off, it will lock/unlock the  
OSD Key Lock function.  
OPERATING THE MONITOR 19  
 
SCREEN ADJUSTMENTS  
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.  
The screen adjustments described in this manual are designed to set image position and minimize  
icker or blur for the particular computer in use.  
The monitor is designed to provide the best performance at resolution of 1280 × 1024, but can not  
provide the best at resolutions of less than 1280 × 1024 because the picture is automatically stretched  
to t the full screen. It is recommended to operate at resolution of 1280 × 1024 in normal use.  
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to  
the screen enlargement process.  
It is preferable to adjust the image position and frequency with the monitor controls, rather than  
the computer software or utilities.  
Perform adjustments after a warm-up period of at least thirty minutes.  
Additional adjustments may be required after the Auto Adjust depending on the resolution or  
signal timing.  
The Auto Adjust may not work correctly when displaying the picture other than the screen  
adjustment pattern. In this case, manual adjustments are required.  
There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock and  
Phase. The other way is performing each adjustment manually.  
Perform the Auto Adjust rst when the monitor is connected to a new computer, or resolution is  
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after  
performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by  
com).  
Adjust the image by following the procedure below to get the desired picture.  
This manual explains adjustment under Windows® OS.  
Display the picture at the optimum resolution.  
A
B
Enter the Test.bmp (screen adjustment pattern) to wallpaper.  
Consult the appropriate documentation for doing this.  
Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in  
the wallpaper setting dialogue box.  
NOTE  
[Adjustment pattern]  
Color bar  
Zebra pattern  
Picture frame  
20 OPERATING THE MONITOR  
 
Press the Auto Button. (Auto Adjust)  
C
D
Adjust the image manually by following procedure below when the screen has a icker or  
blur, or the picture does not t in the display area after performing the Auto Adjust.  
Adjust the V.Position so that the top and bottom of the picture frame will t to the display  
E
area.  
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge  
of the display area.  
F
2) Stretch the right side of the picture frame to the right edge of the display area by  
adjusting the Clock.  
When the left side of the picture frame moves apart from the left edge of the display  
area during the Clock adjustment, adjust steps 1) and 2).  
NOTE  
Another way to make the Clock adjustment is to correct the vertical wavy lines in the  
zebra pattern.  
The picture may icker during the Clock, H.Position and V.Position adjustment.  
In case the picture frame is bigger or smaller than the data display area after the  
Clock adjustment, repeat steps from  
.
C
OPERATING THE MONITOR 21  
 
Adjust the Phase to correct horizontal wavy noise, icker or blur in the zebra pattern.  
G
In case the strong icker or blurs remain on a part of the screen, repeat steps  
and  
F
NOTE  
because the Clock may not be adjusted correctly. If the icker or blurs still remain,  
G
set the refresh rate of computer to low (60Hz) and repeat steps from  
again.  
C
Adjust the H.Position after the Phase adjustment if the horizontal position moves  
during the adjustment.  
Adjust the Brightness and Color to get the desired picture after you complete the Clock  
and Phase adjustments.  
H
Put back your favorite wallpaper.  
22 OPERATING THE MONITOR  
 
POWER MANAGEMENT FEATURE  
The power management feature of this product complies with power saving requirement of ENERGY  
STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption  
of the monitor when your computer is not in use.  
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.  
There is a power management step the monitor takes as described below. The power management  
function, including any timer settings is congured by the operating system. Check your operating  
system manual for information on how this can be congured.  
Power Management Mode  
  
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the  
monitor enters into Power Management Mode which reduces the power consumption to less  
than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power  
Management Mode, the image reappears in several seconds when either the keyboard or the  
mouse are touched again.  
Power Indicator  
NORMAL MODE  
Blue  
POWER MANAGEMENT MODE  
Orange  
POWER  
0
0.5W  
100%  
CONSUMPTION  
NOTE  
Even when using the power management mode, the monitor consumes electricity.  
  
Turn off the Power Switch whenever the monitor is not in use, during the night and  
weekends, to avoid unnecessary power consumption.  
It is possible that the video signal from the computer may be on while the H or V sync  
  
signal is missing. In this instance, the POWER MANAGEMENT feature may not work  
properly.  
OPERATING THE MONITOR 23  
 
TROUBLE SHOOTING  
If the monitor fails to operate correctly, please follow the steps below for a possible solution.  
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem  
you have. If the monitor does not get a picture, skip to 2.  
2. Consult the following items if you cannot nd an appropriate adjustment item in OPERATING THE  
MONITOR or if the problem persists.  
3. If you are experiencing a problem which is not described below or you cannot correct the  
problem, discontinue using the monitor and contact your dealer or iiyama service center for further  
assistance.  
Problem  
Check  
The picture does  
not appear.  
A
The Power Cable is rmly seated in the socket.  
  
(Power indicator  
does not light up.)  
The Power Switch is turned ON.  
  
The AC socket is live. Please check with another piece of equipment.  
  
If the blank screen saver is in active mode, touch the keyboard or the  
  
(Power indicator is  
blue.)  
mouse.  
Increase the Contrast and/or Brightness.  
  
The computer is ON.  
  
The Signal Cable is properly connected.  
  
The signal timing of the computer is within the specication of the monitor.  
  
(Power indicator is  
orange.)  
If the monitor is in power management mode, touch the keyboard or the  
  
mouse.  
The computer is ON.  
  
The Signal Cable is properly connected.  
  
The signal timing of the computer is within the specication of the monitor.  
The screen is not  
synchronized.  
The Signal Cable is properly connected.  
  
B
C
The signal timing of the computer is within the specication of the monitor.  
  
The video output level of the computer is within the specication of the  
  
monitor.  
T h e s c r e e n  
position is not in  
the center.  
The signal timing of the computer is within the specication of the monitor.  
  
The screen is too  
bright or too dark.  
The video output level of the computer is within the specication of the  
  
D
E
monitor.  
T h e s c r e e n i s  
shaking.  
The power voltage is within the specication of the monitor.  
  
The signal timing of the computer is within the specication of the monitor.  
  
24 TROUBLE SHOOTING  
 
Problem  
Check  
No sound.  
The audio equipment (computer etc.) is ON.  
  
F
The Audio Cable is properly connected.  
  
The Volume is turned up.  
  
The Mute is OFF.  
  
The audio output level of the audio equipment is within the specication of  
  
the monitor.  
The sound is too  
loud or too quiet.  
The audio output level of the audio equipment is within the specication of  
  
G
H
the monitor.  
A strange noise is  
heard.  
The Audio Cable is properly connected.  
  
RECYCLING INFORMATION  
For better environment protection please don't dispose your monitor.  
TROUBLESHOOTING / Recycling information 25  
 
APPENDIX  
Design and specications are subject to change without prior notice.  
SPECIFICATIONS : ProLite B1706S  
Size Category  
LCD Panel Driving system  
Size  
17"  
a-Si TFT Active Matrix  
Diagonal: 17" (43cm)  
Pixel pitch  
0.264mm H × 0.264mm V  
250cd/m2 (Typical)  
Brightness  
Contrast ratio  
Viewable angle  
1000 : 1 (Typical), ACR Function Available  
Right / Left : 85 degrees each, Up / Down: 80 degrees each (Typical)  
Response time 5ms (Black, White, Black)  
Display Colors  
Approx.16.77M  
Analog: Horizontal: 24.0-80.0kHz, Vertical: 55-75Hz  
Digital: Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz  
Sync Frequency  
Maximum Resolution  
Input Connector  
Plug & Play  
1280 × 1024, 1.3 MegaPixels  
D-Sub mini 15 pin, DVI-D 24 pin  
VESA DDC2BTM  
Input Sync Signal  
Input Video Signal  
Separate sync: TTL, Positive or Negative  
Analog: 0.7Vp-p (Standard), 75 Positive  
  
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance  
Input Audio Connector  
Input Audio Signal  
Speakers  
ø 3.5mm mini jack (Stereo)  
1.0Vrms maximum  
1W × 2 (Stereo speakers)  
Maximum Screen Size  
Power Source  
337.9mm W × 270.3mm H / 13.3" W × 10.6" H  
100-240VAC, 50/60Hz, 1.5A  
Power Consumption  
Dimensions / Net Weight  
18W typical, Power management mode: 0.5W maximum*  
371.5 × 385.5-495.5 × 249.5mm / 14.6 × 15.2-19.5 × 9.8" (W×H×D)  
5.7kg / 12.6lbs  
Tilt Angle  
Upward: 20 degrees Left / Right: 170 degrees each  
Environmental  
Considerations  
Operating: Temperature  
Humidity  
5 to 35°C / 41 to 95°F  
10 to 80% (No condensation)  
Storage: Temperature -20 to 60°C / -4 to 140°F  
5 to 85% (No condensation)  
Humidity  
Approvals  
TCO Certied, CE, TÜV-GS, VCCI-B  
* Audio equipment is not connected.  
NOTE  
26 APPENDIX  
 
SPECIFICATIONS : ProLite E1706S  
Size Category  
LCD Panel Driving system  
Size  
17"  
a-Si TFT Active Matrix  
Diagonal: 17" (43cm)  
0.264mm H × 0.264mm V  
250cd/m2 (Typical)  
Pixel pitch  
Brightness  
Contrast ratio  
1000 : 1 (Typical), ACR Function Available  
Viewable angle Right / Left : 85 degrees each, Up / Down: 80 degrees each (Typical)  
Response time 5ms (Black, White, Black)  
Display Colors  
Approx.16.77M  
Sync Frequency  
Analog: Horizontal: 24.0-80.0kHz, Vertical: 55-75Hz  
Digital: Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz  
Maximum Resolution  
Input Connector  
Plug & Play  
1280 × 1024, 1.3 MegaPixels  
D-Sub mini 15 pin, DVI-D 24 pin  
VESA DDC2BTM  
Input Sync Signal  
Input Video Signal  
Separate sync: TTL, Positive or Negative  
Analog: 0.7Vp-p (Standard), 75 Positive  
  
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance  
Input Audio Connector  
Input Audio Signal  
Speakers  
ø 3.5mm mini jack (Stereo)  
1.0Vrms maximum  
1W × 2 (Stereo speakers)  
Maximum Screen Size  
Power Source  
337.9mm W × 270.3mm H / 13.3" W × 10.6" H  
100-240VAC, 50/60Hz, 1.5A  
Power Consumption  
Dimensions / Net Weight  
18W typical, Power management mode: 0.5W maximum*  
371.5 × 382.5 × 190.0mm / 14.6 × 15.1 × 7.5" (W×H×D)  
3.5kg / 7.7lbs  
Tilt Angle  
Upward: 20 degrees Downward: 5 degrees  
Environmental  
Considerations  
Operating: Temperature  
Humidity  
5 to 35°C / 41 to 95°F  
10 to 80% (No condensation)  
Storage: Temperature -20 to 60°C / -4 to 140°F  
Humidity  
5 to 85% (No condensation)  
Approvals  
TCO Certied, CE, TÜV-GS, VCCI-B  
* Audio equipment is not connected.  
NOTE  
APPENDIX 27  
 
DIMENSIONS : ProLite B1706S  
371.5mm/14.6"  
339.5mm/13.4"  
59.0mm/2.3"  
(
): Maximum adjustment range  
DIMENSIONS : ProLite E1706S  
371.5mm/14.6"  
339.5mm/13.4"  
59.0mm/2.3"  
28 APPENDIX  
 
COMPLIANT TIMING  
Vertical  
Frequency  
Dot Clock  
Horizontal  
Frequency  
Video Mode  
59.940Hz  
75.000Hz  
72.809Hz  
56.250Hz  
60.317Hz  
75.000Hz  
72.188Hz  
60.004Hz  
70.069Hz  
75.029Hz  
60.020Hz  
75.025Hz  
66.667Hz  
74.500Hz  
74.720Hz  
56.424Hz  
25.175MHz  
31.500MHz  
31.500MHz  
36.000MHz  
40.000MHz  
49.500MHz  
50.000MHz  
65.000MHz  
75.000MHz  
78.750MHz  
108.000MHz  
135.000MHz  
30.240MHz  
57.283MHz  
80.000MHz  
21.053MHz  
31.469kHz  
37.500kHz  
37.861kHz  
35.156kHz  
37.879kHz  
46.875kHz  
48.077kHz  
48.363kHz  
56.476kHz  
60.023kHz  
63.981kHz  
79.976kHz  
35.000kHz  
49.725kHz  
60.150kHz  
24.827kHz  
VGA  
640 × 480  
SVGA  
800 × 600  
VESA  
XGA  
1024 × 768  
SXGA  
1280 × 1024  
640 × 480  
832 × 624  
1024 × 768  
640 × 400  
*
*
*
*
Macintosh  
PC9801  
NOTE * Digital input is not compliant.  
APPENDIX 29  
M062B05  
 

Graco High Chair PD136637C User Manual
Graco Pet Fence 311066C User Manual
Gravely Lawn Mower 988100 User Manual
Grizzly Saw G0511 User Manual
Guardian Technologies Portable Generator 004270 2 User Manual
Haier Washer HWM80 928NZP User Manual
HP Hewlett Packard Laptop WQ861UA User Manual
Hunter Fan Outdoor Ceiling Fan ME003 01 User Manual
Husqvarna Cordless Drill DS160C User Manual
Ice O Matic Ice Maker EF250 User Manual