USER MANUAL
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your
future reference.
Congratulations!
This display is designed for both you and the planet!
The display you have just purchased carries the TCO
Certified label. This ensures that your display is designed,
manufactured and tested according to some of the strictest
quality and environmental requirements in the world. This
makes for a high performance product, designed with the user
in focus that also minimizes the impact on the climate and our
natural environment.
TCO Certified is a third party verified program, where every product model is tested by an
accredited impartial test laboratory. TCO Certified represents one of the toughest certifications for
displays worldwide.
Some of the Usability features of the TCO Certified for displays:
• Visual ergonomics for good image quality is tested to ensure top performance and reduce sight
and strain problems. Important parameters are luminance, contrast, resolution, black level,
gamma curve, colour and luminance uniformity and colour rendering
• Products are tested according to rigorous safety standards at impartial laboratories
• Electric and magnetic fields emissions as low as normal household background levels
• Low acoustic noise emissions (When applicable)
Some of the Environmental features of the TCO Certified for displays:
• The brand owner demonstrates corporate social responsibility and has a certified environmental
management system (EMAS or ISO 14001)
• Very low energy consumption both in on- and standby mode minimize climate impact
• Restrictions on chlorinated and brominated flame retardants, plasticizers, plastics and heavy
metals such as cadmium, mercury and lead (RoHS compliance)
• Both product and product packaging is prepared for recycling
• The brand owner offers take-back options
The requirements can be downloaded from our web site. The requirements included in this label
have been developed by TCO Development in co-operation with scientists, experts, users as
well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in
influencing the development of IT equipment in a more user-friendly direction. Our labeling system
started with displays in 1992 and is now requested by users and IT-manufacturers all over the
world. About 50% of all displays worldwide are TCO certified.
For more information, please visit
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC
Directive” , 2006/95/EC “Low Voltage Directive” and 2005/32/EC “EuP Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in
residential areas, business and light industrial premises and small-scale enterprises, inside as
well as outside of the buildings. All places of operation are characterised by their connection to
the public low voltage power supply system.
We reserve the right to change specifications without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy
efficiency.
TABLE OF CONTENTS
FOR YOUR SAFETY.............................................................................................. 1
SAFETY PRECAUTIONS................................................................................ 1
SPECIAL NOTES ON LCD MONITORS.......................................................... 3
CUSTOMER SERVICE.................................................................................... 3
CLEANING....................................................................................................... 3
BEFORE YOU OPERATE THE MONITOR............................................................ 4
FEATURES...................................................................................................... 4
CHECKING THE CONTENTS OF THE PACKAGE......................................... 4
FITTING AND REMOVAL OF BASE : ProLite B1906S.................................... 5
FITTING AND REMOVAL OF BASE : ProLite E1906S.................................... 6
CONTROLS AND CONNECTORS : ProLite B1906S...................................... 7
CONTROLS AND CONNECTORS : ProLite E1906S...................................... 8
CONNECTING YOUR MONITOR : ProLite B1906S ....................................... 9
CONNECTING YOUR MONITOR : ProLite E1906S .......................................10
COMPUTER SETTING....................................................................................11
ADJUSTING THE VIEWING ANGLE : ProLite E1906S...................................11
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1906S ...12
PANEL ROTATION : ProLite B1906S ..............................................................12
OPERATING THE MONITOR.................................................................................13
ADJUSTMENT MENU CONTENTS ................................................................14
SCREEN ADJUSTMENTS...............................................................................20
POWER MANAGEMENT FEATURE ...............................................................23
TROUBLE SHOOTING ..........................................................................................24
RECYCLING INFORMATION.................................................................................25
APPENDIX ............................................................................................................26
SPECIFICATIONS : ProLite B1906S...............................................................26
SPECIFICATIONS : ProLite E1906S...............................................................27
DIMENSIONS : ProLite B1906S......................................................................28
DIMENSIONS : ProLite E1906S......................................................................28
COMPLIANT TIMING.......................................................................................29
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
You can access the Web page of different countries from there.
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can
cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire
or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any
object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may
cause electric shock.
1
FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire.
To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also
cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable
is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself
as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage
your computer.
CARE TO A HAND AND FINGERS!
Careful attention is required not to catch your fingers or hands when you change the height or the angle.
Injury can occur if care is not taken to avoid finger contact with the displays base when adjusting the
height. (Just for height adjustable model.)
DO NOT USE THE MONITOR FOR 24-HOURS CONTINUOUSLY
The monitor is not designed to work for 24-hours continuously, do not use the monitor for 24-hours
continuously.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is
recommended as looking at the screen continuously can cause eye strain.
FOR YOUR SAFETY
2
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position
to the correct position.
NOTE
Due to the nature of the backlight, the screen may flicker during initial use. Turn off
the Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In this
case, the screen is recovered slowly by changing the image or turning off the Power
Switch for hours.
Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.
CUSTOMER SERVICE
The fluorescent light used in the LCD monitor may have to be periodically replaced.
NOTE
For the warranty coverage on this component, please check with local iiyama service
center.
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
CLEANING
If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
WARNING
CAUTION
NOTE
For safety reasons, turn off the power switch and unplug the monitor before you clean
it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and the
LCD screen.
Spray-type cleaner
Wax
Thinner
Benzine
Acid or Alkaline solvent
Abrasive cleaner
Touching the cabinet with any product made from rubber or plastic for a long time may
cause degeneration or loss of paint on the cabinet.
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then
wipe the cabinet with a soft dry cloth.
LCD
Periodic cleaning with a soft dry cloth is recommended.
SCREEN
Don't use tissue paper etc. because these will damage the LCD screen.
3
FOR YOUR SAFETY
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 1280 × 1024
High Contrast 800:1 (Typical) , ACR Function Available / Brightness 250cd/m2
(Typical) / Quick Response Time 5ms (Typical)
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 1W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® 95/98/2000/Me/XP/Vista/7 Compliant
Power Management (ENERGY STAR® VESA DPMS Compliant)
Ergonomic Design: TCO5.2
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
CHEKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the
monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama
office.
Power Cable*1
Audio Cable
D-Sub Signal Cable
Stand-Base
DVI-D Cable
Screw for stand fixing*2
Safety Guide
Quick Start Guide
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used.However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
*2 Accessory for ProLite B1906S.
CAUTION
BEFORE YOU OPERATE THE MONITOR
4
FITTING AND REMOVAL OF BASE : ProLite B1906S
The monitor is supplied complete with a stand-base. If you prefer to wall mount the monitor, please
follow the instructions below to remove the stand-base. Be sure to include the stand with the monitor if
it is necessary to return the unit.
CAUTION
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor flat on a table with front face down.
A
Install the Stand-Base to the Monitor.
B
C
Fix the Monitor with the Stand by the screw firmly, and the knob of the screw push down.
Stand-Base
Push-down knob
Screw for
Stand-Base fixing
<Remove>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
A
the monitor flat on a table with front face down.
Pull up the knob of the screws, and remove the screw and the Stand-Base.
B
<Stopper pin>
Please stand the monitor and then remove the stopper
pin on the back of the stand slowly while pushing top
face of the stand before you install the monitor. Careful
attention is required as the monitor is sprung loaded
and may expand quickly when removing it.
Stopper pin
5
BEFORE YOU OPERATE THE MONITOR
FITTING AND REMOVAL OF BASE : ProLite E1906S
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
CAUTION
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
A
B
Hold the monitor and push the Stand-Base.
Stand
Stand-Base
<Remove>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
A
B
Lay the monitor flat on a table with front face down.
Press the stopper at the bottom of the stand and remove the Stand-Base from the arm.
Stopper
Stand-Base
Stand
BEFORE YOU OPERATE THE MONITOR
6
CONTROLS AND CONNECTORS : ProLite B1906S
<Back>
<Front>
Power Switch (
)
A
B
C
D
E
F
Menu / Select Button (MENU)
+ / Volume Button ( + )
- / ECO Button ( - )
Auto Button (AUTO)
Power Indicator
Blue:
Normal operation
NOTE
Orange: Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 1W when receiving no horizontal and/or vertical
sync signal.
Speakers
G
H
I
J
K
L
M
D-SUB mini 15pin Connector (D-SUB)
DVI-D 24pin Connector (DVI-D)
Cable Holder
Audio Connector (AUDIO IN)
AC Connector (AC IN)
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
NOTE
without your permission.
7
BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS : ProLite E1906S
<Back>
<Front>
Power Switch (
)
A
B
C
D
E
F
Menu / Select Button (MENU)
+ / Volume Button ( + )
- / ECO Button ( - )
Auto Button (AUTO)
Power Indicator
Blue:
Normal operation
NOTE
Orange: Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 1W when receiving no horizontal and/or vertical
sync signal.
Speakers
G
H
I
J
K
L
D-SUB mini 15pin Connector (D-SUB)
DVI-D 24pin Connector (DVI-D)
Audio Connector (AUDIO IN)
AC Connector (AC IN)
Keyhole for Security Lock
NOTE
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
BEFORE YOU OPERATE THE MONITOR
8
CONNECTING YOUR MONITOR : ProLite B1906S
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
A
B
C
Connect the Power Cable to the monitor first and then to the power supply.
Power of the monitor and the computer is turned on.
D
E
NOTE The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If
a special cable is required please contact your local iiyama dealer or regional iiyama office.
For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama
office for a suitable adaptor.
Make sure you tighten the finger screws at each end of the signal cable.
[Example of Connection]
<Back>
Power Cable
(Accessory)
D-Sub Signal Cable
(Accessory)
DVI-D Signal Cable
(Accessory)
Audio Cable (Accessory)
Computer
[ Collect Cables ]
Put the cables through the cable holder.
Collect cables at the back of the stand.
A
B
9
BEFORE YOU OPERATE THE MONITOR
CONNECTING YOUR MONITOR : ProLite E1906S
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
A
B
C
Connect the Power Cable to the monitor first and then to the power supply.
Power of the monitor and the computer is turned on.
D
E
NOTE The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If
a special cable is required please contact your local iiyama dealer or regional iiyama office.
For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama
office for a suitable adaptor.
Make sure you tighten the finger screws at each end of the signal cable.
[Example of Connection]
<Back>
Power Cable
(Accessory)
D-Sub Signal Cable
(Accessory)
DVI-D Signal Cable
(Accessory)
Audio Cable (Accessory)
Computer
BEFORE YOU OPERATE THE MONITOR 10
COMPUTER SETTING
Signal Timing
Change to the desired signal timing listed on page 29: COMPLIANT TIMING.
Windows 95/98/2000/Me/XP/Vista/7 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on
Windows 95/98/2000/Me/XP/Vista/7 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors
may be necessary for your computer and obtained via the Internet, using the address:
NOTE
For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.
Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.
For further information, please contact your computer dealer first for advice.
ADJUSTING THE VIEWING ANGLE : ProLite E1906S
For optimal viewing it is recommended to look at the full
face of the monitor.
Hold the stand so that the monitor does not topple when
you change the monitor’s angle.
You are able to adjust the monitor’s angle up to 20 degrees
upward, 5 degrees downward.
In order to ensure a healthy and relaxed body position
when using the monitor at visual display workstations, it
is recommended that the adjusted tilt angle should not
exceed 10 degrees. Adjust the monitor’s angle to your own
20
5
preference.
NOTE Do not touch the LCD screen when you change
the angle. It may cause damage or break the LCD
screen.
Careful attention is required not to catch your
fingers or hands when you change the angle.
11 BEFORE YOU OPERATE THE MONITOR
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE : ProLite B1906S
For optimal viewing it is recommended to position
yourself directly opposite to the full face of the
monitor, then adjust the monitor’s height and angle
to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
110mm
You are able to adjust the monitor's height up to
110mm, angle up to 170 degrees right and left, 20
degrees upward.
NOTE Do not touch the LCD screen when you
change the height or the angle. It may
cause damage or break the LCD screen.
Careful attention is required not to catch
your fingers or hands when you change
the height or the angle.
Injury can occur if care is not taken to
avoid finger contact with the displays
base when adjusting the height.
Monitor
Stand
PANEL ROTATION : ProLite B1906S
Adjust the mother’s height.
A
B
Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
90°
Attempting to rotate without fully extending
NOTE
upward may cause damage to stand.
Video card for portrait display will be required
for rotating the image on the screen.
Adjust the monitor’s angle to your preference.
C
BEFORE YOU OPERATE THE MONITOR 12
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 29. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 20 for SCREEN ADJUSTMENTS.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the + / - Buttons.
Luminance
Contrast
Brightness
Eco
50
50
Off
Standard
ON
Picture Mode
ACR
Select the Menu item which contains the adjustment icon relating to the adjustment
you want to make. Press the MENU Button. Then, use the + / - Buttons to highlight
the desired adjustment icon.
B
Press the MENU Button again. Use the + / - Buttons to make the appropriate
adjustment or setting.
C
D
Press the AUTO Button to leave the menu, and the settings you just made would
be automatically saved.
For example, to correct for vertical position, select Menu item of Image Setup and then press the
MENU Button. Then, select V.Position by using the + / - Buttons.
An adjustment page appears after you press the MENU Button. Then, use the + / - Buttons to
change the vertical position settings. The vertical position of the overall display should be changing
accordingly while you are doing this.
Press the AUTO Button lastly, it ends, any changes are saved in the memory.
Image Setup
Clock
50
50
50
50
Phase
H.Position
V.Position
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the Time out has passed. Also, the AUTO button can be used to return previous menu
and turn off the On-Screen Display.
Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for H. / V. Position, Clock and Phase are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.
13 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Luminance
Luminance
Contrast
50
50
Brightness
Eco
Off
Picture Mode
ACR
Standard
ON
Adjustment Item
Problem / Option
Button to Press
Too dull
Contrast
Too intense
Too dark
Brightness *
Eco
Too bright
Off
Normal
Mode1
Mode2
Mode3
Brightness of back-light is reduced.
Direct
Brightness of back-light is reduced more than Mode1.
Brightness of back-light is reduced more than Mode2.
Standard For general windows environment and monitor
default setting.
For text editing and viewing in a word processing
environment.
For internet environment.
Text
Picture Mode
Internet
Game
Movie
Sport
For PC game environment.
For movie and video environment.
For sport environment.
On
Increased Contrast Ratio
Typical Contrast Ratio
ACR
Off
NOTE
ACR adjusts brightness according to the image, and improve the contrast ratio during
move playing.
Contrast, Brightness, sRGB, Eco and Picture Mode cannot be adjusted and selected while
ACR is active.
*
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too
bright.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
ECO: Press the - Button when the Menu is not displayed.
OPERATING THE MONITOR 14
Image Setup
Image Setup
Clock
50
50
50
50
Only Analog Input
Phase
H.Position
V.Position
Adjustment Item
Clock*
Problem / Option
Button to Press
Too narrow
Too wide
Phase*
To correct flickering text or lines
Too left
H. Position
V. Position
Too right
Too low
Too high
*
See page 20 for SCREEN ADJUSTMENTS.
15 OPERATING THE MONITOR
Color Temp.
Color Temp.
Mode1
Gamma
Color Temp.
User-R
Warm
50
50
50
User-G
User-B
Adjustment Item
Problem / Option
Button to Press
Mode1
Normal
Gamma
Mode2
Mode3
Warm
Normal
Cool
Dark
High contrast
Greenish white
Yellowish white
Bluish white
User-R
Color Temp.
Too weak
User
User-G
User-B
sRGB
Too strong
sRGB
NOTE
sRGB is an international standard which defines and unifies the difference of color
appearance between equipment.
You can not adjust the Brightness, Contrast, Gamma and Eco during sRGB mode
because those settings are locked.
OPERATING THE MONITOR 16
OSD Setup
OSD Setup
H.Position
V.Position
Timeout
50
50
50
Language
English
Adjustment Item
Problem / Option
OSD is too left
Button to Press
H.Position
OSD is too right
OSD is too low
OSD is too high
V.Position
Timeout
You can set the OSD display duration time
between 5 and 60 seconds.
English
Deutsch
Français
Español
English
German
French
Spanish
Simplified Chinese
Italian
Italiano
Language
Russian
Japanese
Portuguese Portuguese
17 OPERATING THE MONITOR
Others
Others
Reset
Yes
Signal Select
Auto
Information
Resolution :
H.Frequency :
V.Frequency :
800(H)＊600(V)
38KHz
60Hz
Adjustment Item
Problem / Option
Factory-preset data is restored.
Return to Menu.
Button to Press
Yes
No
Reset
Auto
Select the signal input automatically.
Select the Analog input.
Signal Select
D-sub
DVI-D
Direct
Select the Digital input.
At selected Auto, you can switch the input source by pressing and holding of the AUTO
Button for 2-3 seconds, However it will automatically be selected when just one source is
using.
NOTE
In Power Management Mode input switching is disabled.
Input source is fixed, not selected automatically when D-sub and DVI-D which are selected.
Displays information regarding the current input signal coming
from the graphic card in your computer.
Information
NOTE See your graphic card user guide for more information
about changing the resolution and refresh.
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Signal Select: Pressing and holding of the AUTO Button for 2-3 seconds when the Menu is not
displayed.
OPERATING THE MONITOR 18
Direct
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.
Volume: Press the + Button when the Menu is not displayed.
Adjustment Item
Problem / Option
Button to Press
Too soft
Too loud
Volume
Only Analog Input
Auto Adjust: Press the Auto Button when the Menu is not displayed.
Adjustment Item Problem / Option
Button to Press
Adjust H. / V. Position, Clock and Phase automatically.
Auto Adjust *
*
For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 20 for
SCREEN ADJUSTMENTS.
19 OPERATING THE MONITOR
SCREEN ADJUSTMENTS
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
The screen adjustments described in this manual are designed to set image position and minimize
flicker or blur for the particular computer in use.
The monitor is designed to provide the best performance at resolution of 1280 × 1024, but can not
provide the best at resolutions of less than 1280 × 1024 because the picture is automatically stretched
to fit the full screen. It is recommended to operate at resolution of 1280 × 1024 in normal use.
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to
the screen enlargement process.
It is preferable to adjust the image position and frequency with the monitor controls, rather than the
computer software or utilities.
Perform adjustments after a warm-up period of at least thirty minutes.
Additional adjustments may be required after the Auto Adjust depending on the resolution or signal
timing.
The Auto Adjust may not work correctly when displaying the picture other than the screen adjustment
pattern. In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for Position, Clock and
Phase. The other way is performing each adjustment manually.
Perform the Auto Adjust first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after
performing the Auto Adjust, manual adjustments are required. Both adjustments should be made by
com).
Adjust the image by following the procedure below to get the desired picture.
This manual explains adjustment under Windows 95/98/2000/Me/XP/Vista/7.
Display the picture at the optimum resolution.
A
B
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
NOTE Consult the appropriate documentation for doing this.
Test.bmp is made at resolution of 1280 × 1024. Set the display position to center in the
wallpaper setting dialogue box. If you use Microsoft® PLUS! 95/98 cancel the setting of
“Stretch desktop wallpaper to fit the screen”.
[Adjustment pattern]
Color bar
Zebra pattern
Picture frame
OPERATING THE MONITOR 20
Press the Auto Button. (Auto Adjust)
C
D
Adjust the image manually by following procedure below when the screen has a flicker or
blur, or the picture does not fit in the display area after performing the Auto Adjust.
Adjust the V.Position so that the top and bottom of the picture frame will fit to the display
E
area.
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge of
the display area.
F
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the Clock.
When the left side of the picture frame moves apart from the left edge of the display
NOTE
area during the Clock adjustment, adjust steps 1) and 2).
Another way to make the Clock adjustment is to correct the vertical wavy lines in the
zebra pattern.
The picture may flicker during the Clock, H.Position and V.Position adjustment.
In case the picture frame is bigger or smaller than the data display area after the Clock
adjustment, repeat steps from
.
C
21 OPERATING THE MONITOR
Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern.
G
In case the strong flicker or blurs remain on a part of the screen, repeat steps
NOTE
and
F
because the Clock may not be adjusted correctly. If the flicker or blurs still remain,
G
set the refresh rate of computer to low (60Hz) and repeat steps from
again.
C
Adjust the H.Position after the Phase adjustment if the horizontal position moves during
the adjustment.
Adjust the Brightness and Color to get the desired picture after you complete the Clock and
H
Phase adjustments.
Put back your favorite wallpaper.
OPERATING THE MONITOR 22
POWER MANAGEMENT FEATURE
The power management feature of this product complies with power saving requirement of ENERGY
STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of
the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There
is a power management step the monitor takes as described below. The power management function,
including any timer settings is configured by the operating system. Check your operating system
manual for information on how this can be configured.
Power Management Mode
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor
enters into Power Management Mode which reduces the power consumption to less than 1W. The
screen becomes dark, and the power indicator turns to orange. From Power Management Mode,
the image reappears in several seconds when either the keyboard or the mouse are touched again.
Power Indicator
NORMAL MODE
Blue
POWER MANAGEMENT MODE
Orange
POWER
0
1W
100%
CONSUMPTION
Even when using the power management mode, the monitor consumes electricity. Turn
off the Power Switch whenever the monitor is not in use, during the night and weekends,
to avoid unnecessary power consumption.
NOTE
It is possible that the video signal from the computer may be on while the H or V sync
signal is missing. In this instance, the POWER MANAGEMENT feature may not work
properly.
23 OPERATING THE MONITOR
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you
have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
3.
Problem
Check
The picture does
not appear.
A
(Power indicator
does not light up.)
The Power Cable is firmly seated in the socket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
(Power indicator
is blue.)
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the monitor.
(Power indicator If the monitor is in power management mode, touch the keyboard or the
is orange.)
mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specification of the monitor.
The screen is not The Signal Cable is properly connected.
B
synchronized.
The signal timing of the computer is within the specification of the monitor.
The video output level of the computer is within the specification of the
monitor.
The screen
position is not in
the center.
The signal timing of the computer is within the specification of the monitor.
C
D
E
The screen is too
bright or too dark.
The video output level of the computer is within the specification of the
monitor.
The screen is
shaking.
The power voltage is within the specification of the monitor.
The signal timing of the computer is within the specification of the monitor.
TROUBLE SHOOTING 24
Problem
No sound.
Check
The audio equipment (computer etc.) is ON.
The Audio Cable is properly connected.
The Volume is turned up.
F
The Mute is OFF.
The audio output level of the audio equipment is within the specification of
the monitor.
The sound is too The audio output level of the audio equipment is within the specification of
G
H
loud or too quiet.
the monitor.
A strange noise is The Audio Cable is properly connected.
heard.
RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
25 TROUBLESHOOTING / RECYCLING INFORMATION
APPENDIX
SPECIFICATIONS : ProLite B1906S
Size Category
LCD Panel Driving system
Size
19"
a-Si TFT Active Matrix
Diagonal: 19" (48cm)
Pixel pitch
0.294mm H × 0.294mm V
Brightness
250cd/m2 (Typical)
Contrast ratio
Viewable angle
Response time
Display Colors
Sync Frequency
800 : 1 (Typical), ACR Function Available
Right / Left : 80 degrees each, Up : 75 degrees, Down: 80 degrees (Typical)
5ms (Black, White, Black)
Approx.16.7M
Analog: Horizontal: 24.0-80.0kHz, Vertical: 55-75Hz
Digital: Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
Maximum Resolution
Input Connector
1280 × 1024, 1.3 MegaPixels
D-Sub mini 15 pin, DVI-D 24 pin
VESA DDC2BTM
Plug & Play
Input Sync Signal
Separate sync: TTL, Positive or Negative
Input Video Signal
Analog: 0.7Vp-p (Standard), 75 Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Audio Connector
Input Audio Signal
Speakers
ø 3.5mm mini jack (Stereo)
1.0Vrms maximum
1W × 2 (Stereo speakers)
Maximum Screen Size
Power Source
376.3mm W × 301.1mm H / 14.8" W × 11.9" H
100-240VAC, 50/60Hz, 1.5A
Power Consumption
Dimensions / Net Weight
22W typical, Power management mode: 1W maximum*
409.0 × 415.0-525.0 × 249.5mm / 16.1 × 16.3-20.7 × 9.8" (W×H×D)
6.1kg / 13.4lbs
Tilt Angle
Upward: 20 degrees Left / Right: 170 degrees each
5 to 35°C / 41 to 95°F
Environmental Considerations Operating: Temperature
Humidity
10 to 80% (No condensation)
Storage: Temperature -20 to 60°C / -4 to 140°F
Humidity
5 to 85% (No condensation)
Approvals
TCO5.2, CE, TÜV-GS, VCCI-B, CU
* Audio equipment is not connected.
NOTE
APPENDIX 26
SPECIFICATIONS : ProLite E1906S
Size Category
LCD Panel Driving system
Size
19"
a-Si TFT Active Matrix
Diagonal: 19" (48cm)
Pixel pitch
0.294mm H × 0.294mm V
Brightness
250cd/m2 (Typical)
Contrast ratio
Viewable angle
Response time
Display Colors
Sync Frequency
800 : 1 (Typical), ACR Function Available
Right / Left : 80 degrees each, Up : 75 degrees, Down: 80 degrees (Typical)
5ms (Black, White, Black)
Approx.16.7M
Analog: Horizontal: 24.0-80.0kHz, Vertical: 55-75Hz
Digital: Horizontal: 30.0-80.0kHz, Vertical: 55-75Hz
Maximum Resolution
Input Connector
1280 × 1024, 1.3 MegaPixels
D-Sub mini 15 pin, DVI-D 24 pin
VESA DDC2BTM
Plug & Play
Input Sync Signal
Separate sync: TTL, Positive or Negative
Input Video Signal
Analog: 0.7Vp-p (Standard), 75 Positive
Digital: DVI (Digital Visual Interface Standard Rev.1.0) compliance
Input Audio Connector
Input Audio Signal
Speakers
ø 3.5mm mini jack (Stereo)
1.0Vrms maximum
1W × 2 (Stereo speakers)
Maximum Screen Size
Power Source
376.3mm W × 301.1mm H / 14.8" W × 11.9" H
100-240VAC, 50/60Hz, 1.5A
Power Consumption
Dimensions / Net Weight
22W typical, Power management mode: 1W maximum*
409.0 × 412.5 × 211.5mm / 16.1 × 16.2 × 8.3" (W×H×D)
4.2kg / 9.3lbs
Tilt Angle
Upward: 20 degrees Downward: 5 degrees
5 to 35°C / 41 to 95°F
Environmental Considerations Operating: Temperature
Humidity
10 to 80% (No condensation)
Storage: Temperature -20 to 60°C / -4 to 140°F
Humidity
5 to 85% (No condensation)
Approvals
TCO5.2, CE, TÜV-GS, VCCI-B, CU
* Audio equipment is not connected.
NOTE
27 APPENDIX
DIMENSIONS : ProLite B1906S
409.0mm/16.1"
378.5mm/14.9"
59.0mm/2.3"
(
): Maximum adjustment range
DIMENSIONS : ProLite E1906S
409.0mm/16.1"
378.5mm/14.9"
59.0mm/2.3"
APPENDIX 28
COMPLIANT TIMING
Horizontal
Frequency
Vertical
Frequency
Dot Clock
Video Mode
25.175MHz
31.500MHz
31.500MHz
36.000MHz
40.000MHz
49.500MHz
50.000MHz
65.000MHz
75.000MHz
78.750MHz
108.000MHz
135.000MHz
30.240MHz
57.283MHz
80.000MHz
21.053MHz
31.469kHz
37.500kHz
37.861kHz
35.156kHz
37.879kHz
46.875kHz
48.077kHz
48.363kHz
56.476kHz
60.023kHz
63.981kHz
79.976kHz
35.000kHz
49.725kHz
60.150kHz
24.827kHz
59.940Hz
75.000Hz
72.809Hz
56.250Hz
60.317Hz
75.000Hz
72.188Hz
60.004Hz
70.069Hz
75.029Hz
60.020Hz
75.025Hz
66.667Hz
74.500Hz
74.720Hz
56.424Hz
VGA
640 × 480
800 × 600
SVGA
VESA
XGA
1024 × 768
SXGA
1280 × 1024
*
*
*
*
640 × 480
832 × 624
Macintosh
PC9801
1024 × 768
640 × 400
NOTE * Digital input is not compliant.
29 APPENDIX
M062C03
|