|
Model: iP18 (For US & Canada)
Instruction Manual (English)
Print color : Black text on white paper
Size of manual: 178mmW x 178mmH
Date: Dec 16, 2011
Page 1
Model: iP18
Color Changing
Dual Alarm Clock Speaker
for Your iPhone / iPod
m
e
r
works with
iHome Sleep
alarm clock app
download QR code
reader app and scan
iHome Radio
internet radio app
FCC Information
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
•
•
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Battery Information
For models that use Lithium batteries
• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures.
& not handled appropriately
• Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery
types, or store with hazardous or combustible materials.
• Store in cool, dry, ventilated area.
• Follow applicable laws and regulations for transport and disposal.
Controls and Indicators
Top panel
iPhone/iPod Dock
Dock iPhone/iPod
Time Sync/Set Button
Press to sync clock to time
Alarm 1 Button
Set and arm/disarm Alarm 1
on docked iPhone/iPod.
Press and hold for manual time setting
Alarm 2 Button
Power/Alarm Reset Button
Press to turn unit ON or OFF,
reset alarm when sounding
Set and arm/disarm Alarm 2
Color Button
Sleep Button
Press for sleep timer
Press to cycle color settings
Raise Volume Button
Raise volume
<< Reverse/Minus
Settings Button
Press to lower selected setting
Lower Volume Button
Lower volume
>> Forward/ Plus
Settings Button
Play/Pause iPod/iPhone
Press to raise selected setting
Press to play or pause iPod/iPhone
Snooze/Dimmer Button
Press to silence alarm for selected time
Press to adjust brightness during standard operation
(not during alarm mode)
Back panel
Backup Battery Compartment
Adapter Jack
Plug in AC adaptor cable and
connect to outlet
Access backup battery
1
iP18 Quick Start
1: power
2: inserts
3: auto sync
RESET
R E S T
TEST
T E S
mer
Insert your iPhone/iPod on to the dock. After a
moment the unit will attempt to Auto Sync
the clock on the unit to the time on your
iPhone or iPod. “SYNC AUTO” will appear on
the display, followed by “SYNCED” and 2
beeps. If “FAIL” appears and a long beep
sounds, try again with a different iPhone/iPod
or set time manually (see page 4).
Attach AC adaptor cable to
adaptor jack on back of the iP18
and plug the other end into a
wall socket to play and charge
iPhone/iPod. Remove the tab
from the battery backup
compartment.
Select the dock insert for your
iPhone/iPod model from the table
below and place insert in dock.
To remove insert, place
thumbnail in slot and gently pull
upwards.
Note: An insert provides the best stability and
safety for your iPhone/iPod, but you can safely
dock your iPhone or iPod without an insert,
provided you always do so with care. If you prefer
to use an insert and don’t have one for your model,
free at 800-288-2792 to purchase one.
Use this insert
iPod touch 2G
insert 16
iPhone 4
insert 19
nano 6G/touch 4G
insert 20
For this
iPhone / iPod
nano 6G/
iPod touch 4G
iPhone 4
iPod touch 2G/3G
4: iPhone/iPod
5: color change
Dock a playing iPhone or iPod to turn on the unit. After
a moment you will hear your music. Press the
Button to play a docked iPhone or iPod. Press the
Button again to pause play. Your iPhone or iPod
will charge while docked.
Press and release the Color Button as needed to
cycle through color mode settings. In Fast color
change mode, press and release the Color Button
when a specific color is showing to select that color.
2
Display
Alarm 1 and 2 indicators
Low Backup Battery indicator
Time Display
Alarm is armed and will sound at set time
PM indicator
AM indicator
Sleep indicator
Alarm indicator
Mode indicator &
Bedtime Sleep Timer indicator
Wake to LED effect indicator
Installing/Replacing the Clock Backup Battery
Note: The CR2450 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit.
This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a
temporary power interruption. The battery backup circuit will also operate the buzzer alarm to wake you up at the selected
wake up time even if the power is out. The battery backup circuit requires one CR2450 lithium battery, included.
When the backup battery is getting weak the Low Backup Battery Indicator will begin flashing in the display. When you see
this flashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2450 battery,
available wherever batteries are sold, and follow steps 1 through 4 below to install the replacement battery.
To replace the backup battery:
IMPORTANT: When replacing the backup battery be sure to have the unit connected to
the AC outlet to maintain all of your settings, otherwise it will be necessary to reset the
time and alarm time after the battery is replaced.
1. Place unit face down. Locate the battery backup compartment found on the back of
the unit.
2. Use a Phillips screwdriver to open the battery compartment cover. Remove the cover
and remove the exhausted CR2450 battery.
3. Insert a fresh CR2450 battery in the backup battery compartment with the “+” side
facing up, as illustrated.
4. Replace the battery compartment cover and screw the compartment door back in
place. Do not overtighten. Confirm that the backup battery indicator is not flashing in
the display.
Installing Backup Battery
Note: Make sure you dispose of battery properly (see your local regulations).
3
Setting the Time Using Time Sync
The Time Sync feature allows you to sync the time setting on the unit to the time from your iPhone or recent model iPod (iPod touch,
iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature). By default, the unit will attempt to
Auto Sync whenever an iPhone or iPod is docked. You can turn off auto sync if you prefer to manually sync the time at any time
using the steps below.
1. Press and hold the Time Sync/Set Button on top of the unit until “SET Auto” flashes. Press the << or >> Button to select
“Set manual”. Auto Sync is disabled, and syncing must now be done manually. (To reset for Auto Sync, select “SET Auto”).
2. Gently dock your iPhone or iPod.
3. Press and release the Time Sync/Set Button. “SYNC” flashes in the display, indicating sync attempt. If sync is successful, the
time will update and you will hear two beeps and the display will show “SYNCED”.
4. If sync does not work, a long beep will sound and “FAIL” will appear on the display. If this happens, try using a different
iPhone/iPod to attempt syncing again or set time manually (see below).
NOTE: The iPhone is constantly updated to current time via cell phone towers. The time on your iPod is only accurate to the last
time it was synced to a computer. It’s possible to have up to 59 seconds difference between the unit and synced iPhone/iPod.
Setting the Time Manually
1. Press and hold the Time Sync/Set Button until “SET Auto” flashes. Press the << or >> Button to select “Set manual”.
2. Press and release the Time Sync/Set Button. The time will flash. Press the << or >> Button to set the correct hour (press
and hold for rapid setting). Remember to set the correct AM or PM time. The AM and PM Indicators are located to the left of
the time digits.
3. Press either the
or
Button at any time during clock setting to toggle the display between 24 hour (military) and 12 hour
(standard) display mode. The PM indicator will not appear when display is in 24 hour mode.
4. Press the Time Sync/Set Button again. The year will flash. Press the << or >> Button to set the correct year.
5. Press the Time Sync/Set Button again. The date will flash. Press the << or >> Button to set the correct date (press and
hold for rapid setting).
6. Press the Time Sync/Set Button again (or no button press within 10 seconds) to exit the clock setting mode. 2 beeps will
confirm clock setting is complete.
Setting the Alarms
This unit has a dual alarm system so you can set two separate alarms to different alarm times.
Setting the Alarms
Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button (
or
) for whichever alarm
you are setting.
1. Press and hold the
or
Button until the alarm time flashes on the lower part of the display. Press and release the <<
or >> Button to set the alarm time (press and hold for faster setting). Remember to set the correct AM or PM time.
2. Press and release the Alarm Button again to confirm the set alarm time. If the unit does not detect an iPhone or iPod at
the set alarm time, the unit will default to buzzer alarm. The alarm cycle lasts for one hour; make sure you have enough
music on your iPhone or iPod to last that long.
3. Press and release the Alarm Button again, then press and release the << or >> Button to set the color LED wake cycle:
Dawn (amber fade leading up to alarm time), Flash (flashing red while alarm sounds), Glow (glowing color sequence while
alarm sounds) or None (no wakeup LED effect).
4. Press and release the Alarm Button again (or no button within 10 seconds) to exit the alarm setting mode. The alarm will
be armed once set and the corresponding alarm icon will light up. The lower part of the display will show the earliest set
alarm time.
4
Operating the Alarm
At the set time, the alarm will sound for 1 hour. If waking to iPhone or iPod, make sure your playlist has an hour of music in it.
1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the
The alarm sound will stop but the alarm icon will remain in the display, indicating the alarm is armed. To turn off
the alarm without resetting it for the next day, press and release the Alarm Button.
Button.
2. Press and release the Alarm Button during normal operation (alarm is not sounding) to view the currently set alarm time.
Press and release again as needed to arm the alarm (alarm icon is present) or to cancel it (no alarm icon).
3. Press and release the Snooze Button while alarm is sounding to temporarily silence the alarm for the set snooze time
(default is 9 minutes). To adjust the snooze time: Press and hold the Snooze Button during normal operation. The
snooze time will flash on the display. Press the << or >> Button to adjust the snooze time from 1 - 29 minutes. Press
and release the Snooze Button again (or no button within 10 seconds). Two beeps will sound to confirm snooze setting
and return unit to normal operation.
Playing and Charging your iPhone/iPod
1. Gently dock playing iPhone or iPod. The unit will turn on and in a moment you will hear your music. When docked, the
iPhone or iPod will charge until fully charged.
Note: If the volume is too low on the iPhone/iPod, the unit may not detect that the iPhone/iPod is in play mode. Press
and release the
Button to play it.
2. Press the << or >> Button to go to the next or previous track; press and hold to scan forwards or backwards within a
currently playing track.
3. When the iPhone/iPod is docked and in standby mode, press the
Button to play it.
4. When the iPhone or iPod is in play mode, press the Button to pause play; press again to resume play.
5. Press the or
Button to adjust the unit volume.
6. To turn off the unit, press and release the
Button. Your iPhone/iPod will continue charging while in the dock.
5
Color Change Mode
Color Change Mode can be accessed whether the unt is ON or OFF. There are 3 color settings. Press the Color Button
to cycle through them. The settings are:
• GLOW
Slow color change (default): Colors slowly fade in and out continually from one color to the next.
• FAST
Fast color change: colors change quickly from one to another through the color spectrum.
• 1 COLOR Select the last color. NOTE: To manually cycle to a desired color, press and release the
<< or >> Button as needed while the unit is OFF. This function is not available while the unit is ON.
• OFF
Turns off cabinet color effect.
Dimmer Mode
When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle through High, Medium, Low,
and Off brightness settings. Settings affect both the display and cabinet LED. Dimmer function will not work during GLOW
color change mode. When LED color mode is set to OFF, pressing the Snooze/Dimmer Button will place unit in 1 COLOR
mode with white backlight. Press the Color Button again to return color mode to OFF.
Bedtime Sleep Mode
This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns the unit
off. It will also turn off a docked iPhone or iPod.
1. Press and release the Sleep Button as needed to cycle to the desired sleep setting: 120, 90, 60, 30, 15 minutes or Off
(cancels sleep mode).
2. To set sleep volume, press the
or
Buttons. Sleep volume does not effect normal or alarm volume settings.
3. During sleep mode, press the Sleep Button to view the sleep time remaining. Press again to set sleep to the next lowest
setting.
4. To cancel sleep mode and turn the unit off, press and release the
Button.
6
A Consumer Guide to Product Safety
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However,
improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully
before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in
these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,
laundry tub, swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For
example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it
should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through
the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions
or as marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where
it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning
instructions.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings
or vents located on the product.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable
system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage
to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in
a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Antenna – Do not connect an external antenna to the unit (other than that provided).
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power
cable should be unplugged from the unit to prevent damage or corrosion.
14. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating
instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.
7
Trouble Shooting
Symptom
Possible Problem
Solution
Unit doesn’t respond AC adaptor isn’t plugged to a wall outlet or
Make sure the AC adaptor is properly connected to a working
wall outlet and to the power supply jack on the unit
(no power)
the connector is not plugged into the power
supply jack on the back of the unit
Wall outlet is not functioning
Plug another device into the same outlet to confirm the outlet is working
iPhone/iPod cannot
dock properly
Remove your iPhone/iPod from the connector and check for
any obstruction on the connectors in the dock. Try removing
case or skin from your iPhone/iPod. Then reseat it in the dock.
Possible obstruction in dock area or on
iPhone/iPod (skin or case is in the way)
Playing iPhone/iPod
but there is no
sound
Remove your iPhone/iPod from the connector and check for
any obstruction on the connectors in the dock and on your
iPhone/iPod. Then reseat it in the dock.
iPhone/iPod is not docked properly
Press play button on your iPhone/Pod to play it manually.
Your iPhone/iPod is not playing
iPhone/iPod is locked up
Please make sure your iPhone/iPod is working properly before
docking it to the unit. Please refer to your manual for details.
Using 1st or 2nd generation iPod, iPod Shuffle or
other device
Please connect them with Line-in.
iPhone/iPod didn’t
charge up
Remove your iPhone/iPod from the connector and check for
any obstruction on the connectors in the dock and on your
iPhone/iPod. Then reseat it in the dock.
iPhone/iPod is not docked properly
iPhone/iPod is locked up/frozen
iPhone/iPod battery has problem
Volume level is set too high
Sound source is distorted
Please make sure your iPhone/iPod is working properly before
docking it to the unit. Please refer to your manual for details.
Sound is distorted
Decrease the unit volume
If original sound source file is poor quality, distortion and noise
are easily noticed with high-power speakers.
Try a file from a trusted audio source such as iTunes
If you are using an iPod Shuffle or external sound source like
older generation iPod, try reducing the output volume on the
device itself. Also, try turning bass boost OFF under iPod
settings.
LED color lighting
effect is missing/
not working
Press Color Button to cycle to other color LED modes
LED color mode is set to OFF
Dimmer is set to OFF
Press Snooze/Dimmer Button to cycle to other brightness modes
Unit is running on backup battery
Make sure the AC adaptor is properly connected to a working
wall outlet and to the power supply jack on the unit
8
Limited 1 Year Warranty Information
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects
in workmanship and materials, under normal use and conditions, for a period of 1 year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this
fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI Technologies will
repair or, at its discretion, replace this product without charge (except for a $20.00 charge for handling, packing, return UPS/postage, and
insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed
below. The product must include proof of purchase, including date of purchase. The fee for service without proof of purchase is $40.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are
the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $20.00 ($40.00 without proof of purchase).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
1330 Goodyear Drive
El Paso, TX 79936-6420
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have
been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii)
cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv)
the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser.
In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable
to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do
not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding
to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies product.
© 2011 SDI Technologies, Inc. All rights reserved
or call 1-800-288-2792 Toll Free
iP18-120811-English
Printed in China
|