COmBINATION INSTALLATIONS
microwave/renaissance wall Oven/
PLANNING
GUIDE
Revised
1/1
warming Oven
05/29/08
All tolerances: +1/16”, -0, (+1.6mm, -0) unless otherwise stated
7/8” (22mm) Min.
120 Vac
Microwave
Receptacle
“A”
16 3/4”
(425mm)
3/4"
(19mm) Min.
1
1 7/8”
(48mm)
Min.
240 Vac
Wall Oven
“A”
58 1/2”
Min.
(1486mm)
Overall
Stacked
Height
19 1/8"
(486mm)
120 Vac
Microwave
Receptacle
Junction Box
27 5/8”
(702mm)
“B”
1
1 5/8"
(41mm)
Min.
240 Vac
Wall Oven
Junction Box
60 1/2"
Min.
(1536mm)
Overall
Stacked
Height
1
1
1 1/2”
(38mm)
9 1/8” Min.
(232mm)
27 5/8"
(702mm)
“B”
“C”
120 Vac Warming
Oven Receptacle
3/4” (19mm)
Min.
1
1
1 1/2"
(38mm)
Min.
“C”
120 Vac Warming
9 1/8"
Oven Receptacle
(232mm)
CUTOUT DImENSIONS
DmT2420 SHOwN
3/4" (19mm)
Min.
NOTE:
CUTOUT DImENSIONS
1. 3/4” (19mm) support platform (flush with cutout).
2. See individual appliance Planning Guide pages to
determine overlays.
DCm24 SHOwN
3. Spacing between appliances and drawers/doors
shown is minimum required to allow for ventilation
and prevent scrapping. Additional space may need
to be added for appearance.
Microwave
Model No.
Wall Oven
Models
Warming
Oven
Models
“A” Cutout Width
24 3/8” (619mm)
25 1/4” (641mm)
28 1/4” (718mm)
25” (635mm)
“B” Cutout Width
“C” Cutout Width
DMT2420 w/AMTK Series Trim Kit
DCM24 w/ACTK27 Trim Kit
DCM24 w/ACTK30 Trim Kit
DCM24 w/ACTK36 Trim Kit
Single 27”
25 1/2” (648mm)
28 1/2” (724mm)
34 1/2” (876mm)
27”
25 1/2” (648mm)
Single 30”
Single 36”
30”
28 1/2” (724mm)
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
CI.24
|