Genz Benz Stereo Amplifier 60LT User Manual

OWNERS MANUAL  
FEATURES:  
Lightweight 29 lb Design  
Stereo 60 Watt Power  
24-bit Stereo Studio Quality Digital Effects  
XLR & ¼” Inputs  
Two Channels w/ 3 Band EQ w/ Sweepable Mids Dual 6.5” Woofers & Bullet Tweeters  
Compact Monitor Shape Cabinet Design  
Phantom Power for Condenser Mics  
XLR Direct Outputs (left & right)  
Speaker Stand Adaptor  
PRODUCT DESCRIPTION -The lightweight Shenandoah™ Stereo 60LT is configured as a 2 channel stereo 60  
watt acoustic instrument amplifier featuring stereo digital effects. Each channel is equipped with a ¼” unbalanced line  
input and channel 1 is also equipped with an XLR balanced microphone input (with phantom power). The 2 inputs on  
channel 1 are summed (mixed) together at a 1:1 ratio. Each channel offers a 3 band equalizer with a sweepable  
midrange frequency control. Equalization centers were carefully selected for use with acoustic instruments.  
Each channel also contains individual send controls to the stereo digital effects circuit. The channel signals are then  
summed together, mixed with the digital effects return and passed on to the internal dual 30 watt power amplifier (60  
watts total). The back panel contains stereo XLR balanced outputs with ground lift switch, stereo unbalanced line  
outputs, two 1/4” speaker jacks, a headphone output, and an effects cancel jack.  
 
ACTIVE EQUALIZATION - The Shenandoah™ Stereo 60LT contains a 3 band (with sweepable mid)  
active equalizer on both channels 1 and 2. These EQ networks, similar to those found on professional sound  
consoles, are very useful tools when used correctly.  
LOW FREQUENCY EQ - The corner frequency of the low frequency section is 125 Hz, shelving curve. This frequency  
is particularly handy when dealing with low frequency feedback from a big dreadnaught guitar. A combination of  
volume reduction and turning down the low frequency control will generally get good results. Become familiar with the  
action of the controls since their effective gain range is quite large. The low frequency control is also handy for adding  
some “bottom” to a baritone sax and “chunk” to a mandolin or mando-cello.  
HIGH FREQUENCY EQ - The corner frequency of the high frequency section is 8 kHz, shelving curve. This frequency  
is especially useful for taming the bright harshness of some mandolins, violins, brass, and reeds. It can also be used  
to help acoustic guitars, cellos, and flutes cut through other players in loud club situations.  
MID FREQUENCY EQ - The “sweepable mid” section features 15 dB of cut or boost with a bandwidth approximately 1  
octave wide. The center frequency of this filter is continuously user adjustable from 250 Hz to 5 kHz with a single  
control. This filter is typically (but not always) used to reduce or remove offending frequencies in the instrument’s pick-  
up response. Removing only the minimum amount necessary will yield the most acoustically rewarding results. The  
easiest and most repeatable way to determine the offending frequency range is to boost the mid level somewhat (but  
not to the point of feedback) and while playing, sweep the frequency control slowly across its range. You may need a  
third hand until it becomes second nature, but soon you will find out just how quick it can be. You will hear a clear and  
obvious accentuation of the ugliness you want to remove. The ear is a most sensitive and discriminating piece of test  
equipment when used in this manner, another good reason to protect them! This is the way many touring sound  
engineers equalize, since it is quick, accurate and repeatable. Occasionally, you will find need to use the mid section  
in “boost” mode, particularly common when adding higher mids (bite) to an otherwise dull instrument, or adding low  
mid “body” to an otherwise thin sound. Spend some time experimenting so that the process becomes creative as well  
as corrective. The 9 o’clock position is 300 Hz, the 12 o’clock position is 1.25 K Hz and the 3 o’clock position is 3 K Hz.  
MASTER VOLUME - The master volume control adjusts the overall volume of channel 1, channel 2 and the effects  
return. Typically, best results are obtained when this control is operated between the 9 o’clock and 3 o’clock positions.  
REAR PANEL  
DIRECT OUTPUTS -The Shenandoah™ Stereo 60LT is equipped with left and right XLR balanced direct outputs  
and unbalanced ¼” line level outputs. The left direct output also serves as a mono send. Both the XLR balanced  
and ¼” unbalanced outputs make “real world sense” when connecting with other equipment. The ¼” unbalanced  
outputs are true professional line level (+4 dBv) with an output impedance of 1k ohm and can drive virtually  
any line level input, including power amplifiers. The XLR balanced output is “hot” mic level, rated at -30 dBv. This  
configuration allows the Shenandoah™ Stereo 60LT to drive very long cable lengths (250+ feet) without problems or  
added noise. The XLR balanced direct outputs can be “ground lifted” with the switch provided. This switch lifts pin 1  
on the XLR balanced output to break any ground loops between the Shenandoah™ Stereo 60LT and a PA system.  
Both outputs are post master volume/post EQ/post effects to aid in sending a “finished” mixed signal to a PA system  
or external power amplifier.  
 
HEADPHONE JACK -This jack, located on the rear panel, allows the user to enjoy the tone of this amp through  
standard headphones (8-600 ohms). A speaker switch shuts off the internal speakers.  
EFFECTS CANCEL JACK - A ¼” effects cancel jack is provided on the back panel to mute the internal effects via  
footswitch. Any standard single button latching footswitch (with shielded cable) may be used. Signal is muted when  
the switch is closed.  
POWER AMPLIFIER -The Shenandoah™ Stereo 60LT contains an advanced stereo monolithic power amplifier  
circuit that is completely protected against overloads, short circuits and thermal faults. Output is rated at 30 watts per  
side (60 watts total) into 4 ohms, with excellent overload recovery characteristics.  
IEC POWER INLET CONNECTOR -The Shenandoah™ Stereo 60LT uses a detachable power cord and  
is shipped from the factory with the appropriate power inlet cable and connector for the market the amplifier was  
shipped to. There is an AC mains fuse located in a small drawer within this molded connector.  
PHANTOM POWER - An internal phantom power source (12 volts) is provided for use with condenser mics.  
This power source is on at all times and does not affect the standard operation of the amp, even when a condenser  
mic is not used. We use the DIN 45-596-P12 volt standard which will operate virtually all of the live sound  
reinforcement condenser microphones on the market. Some “boutique” externally biased condenser mics will not  
be compatible and will require 48 volt phantom power. We suggested live sound condenser mics by: AKG, Audio  
Technica, Shure and Crown.  
SPEAKER OUTPUT JACK - The Shenandoah™ Stereo 60LT provides left and right ¼” speaker output jacks.  
Minimum total load is 4 ohms per side.  
SPEAKER COMPLIMENT - The Shenandoah™ Stereo 60LT utilizes two specially designed 6.5” woofers and  
dual compression tweeters. The cabinet features a front port for more rounded low frequency response. The  
impedance of the internal speakers is 4 ohms per side.  
MONITOR SHAPED CABINET DESIGN - The Shenandoah™ Stereo 60LT utilizes lightweight plywood to help  
reduce weight. This cabinet design offers two platforms so the cabinet can be used in the normal upright position or  
tipped back towards the performer for more of a monitoring situation. Leaning the cabinet back can change the tone of  
the amp and reduce boomy low frequencies.  
SPEAKER STAND MOUNT - A 1 1/2 “ speaker stand mount is provided for use with a speaker stand.  
WARNING!  
. The use and operation of this device constitutes an agreement of full release of any and all liability connected with  
its use. Only persons familiar with the operation of high powered audio equipment should attempt to operate this  
device.  
. In addition, by use of this device, the user agrees to hold Genz Benz and its designers, sales agents, and all  
other affiliates and related parties harmless in the event of any accident, injury, damage, or loss resulting from such  
use.  
. Manufacturer’s sole responsibility is to provide a warranty on the specified performance of the product under  
normal operating conditions for a period of 3 years.  
 
WARRANTY:  
• Genz Benz warrants the model Shenandoah™ 60LT to be free from defects in materials and  
workmanship for a period of 3 years from the date of purchase, when purchased from an authorized Genz Benz  
dealer.  
• This warranty does not cover normal wear and tear incurred from the normally designed use of the product.  
• This warranty is effective only if a copy of the original sales receipt is presented at the time of warranty service.  
• This limited warranty is completely transferable to any subsequent buyer as long as the original sales receipt is also  
transferred to such subsequent buyer.  
• All warranty service must be performed by a Genz Benz authorized service center.  
• Before returning any unit for service, a returned merchandise authorization number (RMA#) must be obtained by  
calling 480-941-0705  
• This warranty is valid in the US and Canada only. For all products sold outside the USA, warranty is handled through  
SAFE OPERATING REQUIREMENTS:  
• Never set an amplifier on anything that will tip over or collapse under its weight.  
• Provide a minimum distance of 25.4 mm (1 inch) around all sides of the amplifier for sufficient ventilation. The  
ventilation should not be impeded by covering the amplifier’s vent openings with items such as newspapers, table  
cloths, curtains, etc.  
• No naked flame sources, such as lighted candles, should be placed on the Shenandoah™ 60LT amplifier.  
• This amplifier should not be exposed to dripping or splashing and no objects filled with liquids, such as vases or  
drinks, shall be placed on this product.  
• The Shenandoah™ 60LT amplifier should be connected to a mains socket outlet (power receptacle) with  
a protective earth (ground) connection at all times.  
• The amplifiers mains plug (power plug) is considered the disconnect device and the connection must remain  
accessible at all times.  
• This amplifier is capable of producing sound pressure levels that may cause hearing loss.  
• There are no user serviceable parts and hazardous operating voltages are present inside this unit. Always consult a  
qualified repair facility for service.  
 
SHENANDOAH™ STEREO 60LT  
ENGINEERING SPECIFICATIONS  
INPUTS  
XLR Balanced input impedance:  
XLR Balanced input sensitivity:  
¼” Unbalanced input impedance:  
¼” Unbalanced input sensitivity:  
2.2 k ohms  
-60 to -30 dBV  
300 k ohms  
-30 to +4 dBV  
AMPLIFIER OUTPUT  
Power at 4 ohm load:  
THD + N (preamp):  
30 watts per side RMS, 60 watts total  
<0.035%  
THD + N (power amp):  
Frequency response:  
<0.07%  
20 Hz -20 kHz +/- 1dB  
CHANNEL EQUALIZATION  
Low frequency:  
Mid frequency (sweep):  
High frequency:  
125 Hz shelving, +/-15dB  
250 Hz - 5 kHz , peaking, +/-12dB  
8 kHz shelving, +/-15dB  
DIRECT OUTPUTS  
XLR balanced output level:  
XLR balanced output impedance:  
¼” unbalanced output level:  
¼” unbalanced output impedance:  
-30 dBV nominal  
150 ohms  
+4 dBv nominal  
1k ohm  
DIGITAL EFFECTS  
Processor type:  
Internal processing:  
A/D converter  
WAVE FRONT™ STEREO DSP engine  
24 bit  
24 bit - 64X oversampling  
24 bit - 128X oversampling  
80 dB  
D/A converter:  
Dynamic Range:  
THD + N (1 kHz)  
Sampling rate:  
<0.01%  
48 kHz  
Due to continuing product improvements and changes, all specifications are subject to change without notice.  
 
Declaration of Conformity  
(89/336 EEC-EMC Directive)  
Manufacturer’s Name:  
Manufacturer’s Address:  
Genz Benz, a division of KMC Music Company  
7811 East Pierce Street  
Scottsdale, AZ 85287, U.S.A.  
Product Type:  
Audio Amplifier  
Model Number:  
Operating Power Condition:  
Effective Date:  
Shenandoah™ Stereo 60LT  
100/115/230/240 V, 50/60 Hz  
12-01-2007  
Conforms to the Following Standards:  
[X] EN 55013: 2001 + A1: 2003  
[X] EN 55020: 2002 + A1: 2003  
[X] EN 60065  
[X] IEC 61000-3.3: 1994 + A1: 2001  
[X] IEC 61000-4.2  
[X] IEC 61000-4.3  
[X] IEC 61000-4.4  
[X] FCC -15.107 and 15.109  
[X] RoHS Directive 2002/95/EC  
[X] WEEE Directive 2002/96/EC  
[X] CE Mark LV Directive 73/23 EEC  
A KMC Music Company, Bloomfield, CT  
7811 E. Pierce Street, Scottsdale, AZ 85257  
PH: 480-941-0705 FAX: 480-946-2412  
REV 5  
 

Eizo Computer Monitor CH4 User Manual
Estate Range TGP300T User Manual
Extron electronic Switch CrossPoint 124 User Manual
Fisher Price Motorized Toy Car N9522 User Manual
FoodSaver Food Saver V3860 Series User Manual
Frigidaire Convection Oven FPGF3081K F User Manual
Frigidaire Washer 134305500A User Manual
Gefen Switch 4x2 HDMI User Manual
GE Refrigerator 200D8074P050 User Manual
GE Telephone 29568 User Manual