Backlight Keypad
Digital Entry System
26
80
Additional LED functions for DG-15 and DG-25
Digital Keypad Series. Back Light keypads visible
in the dark which you won't have trouble locating
the control panel in the dark room. Upgrade the
quality of Access Control System with the new
updated design.
6
11
77
64
DG-25LD (Surface Mount)
75
123
135
8
11
DG-15LD
55
35
90
Unit: mm
DG-26LD (Flush Mount)
93
Features
55
4 or 5 digit codes programmable
Allows up to 20+1 PIN codes
Dual Relays output for multi-control
Door Reed Switch Input forAnti-Trailing
Fully Programmable via keypad and master code
3 LED display withAudible indication
Invalid PIN Lock-out
138
40
Unit: mm
DG-27LD (Surface Mount)
Metal casing housing
With Vandal Resistant Screws
Features
Specifications
Operating Voltage: 12 Vdc
Current Draw: Average 15mA, Peak 100mA @ 12Vdc
Input: request-to-exit, time out reed switch contact
Output: Dual relays, N.O. / N.C./ Com. Output (free voltage
contact)
Relays Electric Current: 2A MAX @30Vdc; 0.4A @ 120Vac
Relay Activation Time:
Relay 1 time delay setting code:*30
Relay 2 setting code: *31
Strike Time: 1~99 seconds
Strike mode: Access Timer or Latch
Memory Volume: 20+1 PIN codes
Relay 1 is controlled by 01~20user slots
Relay 2 is controlled by *21 user slots
Operating Temperature: -20~+70C
Allows up to 49+50 PIN codes
Dual relays output for multi-control
Door Reed Switch Input for Anti-Trailing
Fully Programmable via keypad and master code
3 LED display with audible indication
Non-Volatile Memory
Invalid PIN Lock-out
Durable Stainless Steel housing
With vandal resistant screws
Optional with Water-proof Keypad
Ambient Humidity: 5~95% relative humidity non-
condensing
Factory Master Code: 12345
Invalid PIN Lock-out: The system will shut down for 60
seconds while 30 codes of incorrectly Master Codes
enrolled or PIN codes attempted(None beeper signal
of keypad activations).
EPROM: Non-volatile memory, System will retain all
programs and codes after a total loss of power.
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
1
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-Keypad-LED Ver. A Published on 2008.08.01
|