QuickSpecs
Overview
HP Integrity rx5670 Server
1. Memory Carrier 1 (4 slots)
2. Redundant, Hot-swap Fans
6. Ultra160 SCSI Hot-plug Disks
7. Redundant, Hot-swap Power Supplies
3. Core I/O Ultra160 SCSI, 10/100/1000Base-TX RS-232 and LAN Console 8. Itanium 2 CPUs
4. PCI-X I/O Slots
9. Memory Carrier 2 (24 slots)
5. Removable Media Slot
DA - 11719 Worldwide — Version 6 — July 2, 2004
Page 1
QuickSpecs
Standard Features
HP Integrity rx5670 Server
M inim um System
One 64 bit Itanium 2 CPU: either 1.3 GHz/3 MB cache or 1.5 GHz/6 MB cache
1 GB PC2100 ECC Registered DDR266A SDRAM (4×256MB DIMMs)
One 24 DIMM slot memory carrier board
Two power supplies
Maximum Server
C apacities
Four 64 bit Itanium 2 CPUs: either 1.3 GHz/3 MB cache or 1.5 GHz/6 MB cache
96 GB PC2100 ECC Registered DDR266A SDRAM (48×2GB DIMMs)
Two 24 DIMM slot memory carrier boards (48 DIMM slots total)
Three Hotswap power supplies, providing N+1 protection for power supplies and power input
Ten PCI X or PCI I/O adapter cards
One internal DVD ROM or DDS 3 drive
Four internal hot plug LVD SCSI disks
Standard System Features
Three Operating System support: HP UX 11i version 2, Windows Advanced Server, and Linux
Two Internal Ultra 160 LVD SCSI controllers w/dual channels; first controller supports one channel to an external
port (U160 SCSI) and one channel to two internal HDDs (UltraWide SCSI), second controller supports one channel
to internal HDDs (UltraWide SCSI) and one channel to internal tape or DVD bay (UltraNarrow SCSI). Please note:
SCSI bus speed for the internal disk drives is 40MB/s, not the 160MB/s of the controller.
10/100/1000Base TX LAN (with auto speed sensing; RJ 45 connector)
Management Processor for remote management and HA monitoring
Telnet and web console via 10/100Base TX management LAN (RJ 45 connector)
Three RS 232 serial ports linked to the management processor (multiplexed from a single DB 25 port)
Factory integration of CPUs, memory, disk drives, removable media, and I/O cards
Rackmountable into 19 inch cabinets
Optional stand alone pedestal mount
Three year warranty with next business day on site
H ig h A va ila b ility
N+1 Hotswap cooling
Two Hotswap power supplies-optional third power supply for N+1 protection
On line memory page deallocation
ECC protected DDR memory
Memory chip spare to overcome single DRAM chip failures
Dynamic Processor resilience and deallocation
UPS power management
Hot Plug internal disks
Two independent Ultra SCSI buses to internal disks for mirroring across disks and controllers
Journal file system with HP UX
Auto reboot
HP MC/ServiceGuard for HP UX
Microsoft Windows Cluster Service
HP ServiceGuard Extension for RAC for HP UX
ServiceGuard Manager for HP UX
Insight Manager 7-proactive fault management
EMS HA Monitors for HP UX
ECM Toolkit for HP UX
HP Cluster Verification Tool for Windows cluster service monitoring
HP Surestore AutoPath for HP UX
MirrorDisk for HP UX
Security
Separate LAN for system management
Password protection on console port
Disablement of remote console ports
SSL encryption on web console
DA - 11719
Worldwide — Version 6 — July 2, 2004
Page 3
QuickSpecs
Standard Features
HP Integrity rx5670 Server
M anageability
HP Ignite UX for installation and deployment of the operating system
HP Software Distributor UX for software and patch management
HP Servicecontrol Suite for HP UX
HP TopTools for Windows and Linux
Management processor for comprehensive remote management of HP UX, Windows, and Linux
Process Resource Manager for HP UX workload management
DA - 11719
Worldwide — Version 6 — July 2, 2004
Page 4
QuickSpecs
Configuration
HP Integrity rx5670 Server
C PU C onfiguration
The HP Integrity rx5670 is a symmetrical multiprocessing (SMP) server supporting up to four high performance 64 bit
Itanium 2 processors.
Processor Details
1.3 GHz or 1.5 GHz frequencies
Level 3 Cache: 3 MB (1.3 GHz) or 6 MB (1.5 GHz)
Level 2 Cache: 256 KB
Level 1 Cache: 32 KB
Single bit cache error correction
50 bit physical addressing
64 bit virtual addressing
4 GB maximum page size
C PU C onfiguration Rules
M em ory Configuration
CPUs can be installed one at a time
CPUs must be installed in the following sequence: 0, 1, 2, 3
1.3 GHz and 1.5 GHz CPUs cannot be mixed in the same system
The HP Integrity rx5670 supports DDR (double data rate) SyncDRAM (synchronous dynamic random access memory) DIMMs
with ECC and chip spare protection. The HP Integrity rx5670 supports up to two 24 DIMM memory carrier boards, for a
maximum of 48 DIMMs. Each memory carrier board connects to the memory controller via a 6.4 GB/s memory bus. Peak
memory bandwidth across both buses and both carrier boards is 12.8 GB/s.
M em ory Loading Rules and Perform ance G uidelines
Memory must be installed in groups of four DIMMs, also known as quads
Each quad must consist of equal density DIMMs
Memory can be ordered in quads of 1 GB (4×256MB), 2 GB (4×512MB), 4 GB (4×1GB), or 8 GB (4×2GB)
Minimum memory is 1 GB (4×256MB)
Maximum memory is 96 GB, using twelve 4 GB memory quads in both memory carrier boards
Windows Server 2003 has a maximum memory configuration of 64 GB
HP UX 11i version 2 and Linux have a maximum memory configuration of 96 GB
Memory must be loaded in the order depicted on the memory carrier board
Arrange DIMMs so that the quads with the largest capacity are in the lowest numbered slots.
Each memory carrier board has its own 6.4 GB/s bus. Configure both memory carrier boards to maximize
bandwidth and performance
If both memory carrier boards are used, load memory equally across the carriers-alternate loading of DIMMs, in
groups of four, between the two carriers.
Racking C onfigurations
There are two rail options, static or slider, available for racking the HP Integrity rx5670 into an HP cabinet. The slider rail
enables the HP Integrity rx5670 to easily slide out of a cabinet for servicing. The slider occupies one additional EIA unit of
rack space. The combination of an HP Integrity rx5670 and slider rail will consume eight EIA units of rack space. The slider
also enables the hot swap of four fans in the side cavity. Slider rails are highly recommended.
Static rails are also available. Static rails do not consume EIA space within the cabinet, therefore leaving more EIA space
for peripherals. However, using static rails prohibits hot swap of the I/O bay fans. Static rails should only be used when
cabinet vertical space prohibits the use of slider rails.
If a rack is not required, the system can be placed in the standalone/deskside mount (A5525A).
Anti-Tip Feet
Bolt on anti tip feet are required when racking an HP Integrity rx5670 on a slider. Factory integrated cabinets will include
bolt on feet with every cabinet by default. For cabinets that don't already have bolt on feet, order the bolt on anti tip feet
(A5540A). Bolt on feet should always be used instead of the pull out foot stored in the cabinet base.
DA - 11719
Worldwide — Version 6 — July 2, 2004
Page 5
QuickSpecs
Configuration
HP Integrity rx5670 Server
Cabinet Space
Requirem ents
The HP Integrity rx5670 requires a minimum of 24 inches (61 cm) of free space in both the front and rear of the cabinet for
proper ventilation. During product installation and servicing, a total of 32 inches (82 cm) of free space is needed at the
front of the cabinet.
The depth of HP A490xA cabinets is 39 inches (99 cm). Therefore, a minimum of 87 inches (221 cm) of total space is
needed for each cabinet during normal operation. An additional 8 inches (21 cm) is needed during installation and
servicing.
M axim um C onfigurations
Multiple HP Integrity rx5670 systems can be installed into a HP cabinet. The maximum number of systems per
cabinet is only limited by the cabinet EIA availability.
A4900A – Quantity 3 HP Integrity rx5670 (with or without slider rails)
A4901A – Quantity 4 HP Integrity rx5670 (with or without slider rails)
A4902A – Quantity 5 HP Integrity rx5670 (with or without slider rails)
Factory Racking
HP factories can install multiple HP Integrity rx5670 systems into a single cabinet. In addition, multiple HP Integrity rx5670
configurations can be ordered within a single cabinet. Order product A5580A for factory racking with static rails. Order
product A5581A for factory racking with slider rails.
Installation Into Third-
Party C abinets/Racks
The HP Integrity rx5670 supports the same non HP racks as the rp5470.
DA - 11719
Worldwide — Version 6 — July 2, 2004
Page 6
QuickSpecs
Configuration
HP Integrity rx5670 Server
I/O Architecture
The HP Integrity rx5670 I/O architecture utilizes industry standard PCI X and PCI buses in a unique design for maximum performance, scalability and
reliability.
The HP Integrity rx5670 architecture uses eight high speed I/O channels. Each channel provides 0.5 GB/s of sustained I/O throughput. The diagram above
shows how these channels are used to provide bandwidth to the ten available PCI X and PCI slots as well as to the multifunction core I/O. Note that the
rx5670 backplane has twelve I/O slots, however slots #1 and #3 (counting from the bottom) will always be filled with core I/O. Slot #2 will come factory
loaded with a graphics and USB card if the HP Integrity rx5670 is ordered with the Windows operating system. The VGA/USB card is optional for systems
ordered with HP UX or Linux.
The three slots at the top of the backplane (#10, 11, and 12) all have their own dedicated 64 bit 133 MHz PCI X bus and their own independent 0.5 GB/s
I/O channel. The highest performing I/O cards should be placed in these three slots. The independent channels provide improved I/O performance and
error containment. Independence protects each I/O card from bus hangs or extended latencies due to the failure or high bandwidth demands of other I/O
cards. Independence also ensures that each I/O card can achieve maximum throughput.
The next six slots (4 through 9) share three 64 bit 66 MHz PCI X buses, with two slots allocated to each bus. Each pair of slots shares a 0.5 GB/s I/O
channel. If a 33 MHz card shares a bus with a 66 MHz card, the faster card will downgrade to 33 MHz.
Slot #3 is loaded with a Gigabit LAN/U160 SCSI core I/O card. Every rx5670 contains this card. A dedicated 64 bit 133 MHz PCI X bus and a dedicated
0.5 GB/s I/O channel serve this slot.
Slots #1 and #2 are also used for core I/O. Slot #1 always contains the Management Processor/U160 SCSI core I/O card. Slot #2 will be loaded with the
graphics and USB card if a Windows operating system is ordered. Slot #2 is open if HP UX or Linux is ordered. The graphics and USB card is available as an
option with HP UX and Linux, and it should always be placed in slot #1. If the graphics and USB card is not used, slot #1 can be used for other PCI I/O
cards. Slot #1 always runs at 33 MHz.
All I/O slots are keyed for 3.3V I/O cards. 5V cards are not supported in the HP Integrity rx5670.
Number of
Slots
Bandwidth Per Slot
0.5 GB/s
Bus W idth
Bus Speed
Slot Keying
Dedicated
Shared
3
6
64 bits
64 bits
133 MHz, 66 MHz or 33 MHz
66 MHz or 33 MHz
3.3 Volts
3.3 Volts
0.5 GB/s per pair of slots (three
pairs)
LAN/SCSI Core
Management/SCSI Core
VGA/USB1
1
1
1
0.5 GB/s
64 bits
64 bits
64 bits
133 MHz
33 MHz
33 MHz
3.3 Volts
3.3 Volts
3.3 Volts
0.5 GB/s shared with VGA/USB
512 MB/s shared with
Management/SCSI Core
DA - 11719 Worldwide — Version 6 — July 2, 2004
Page 7
QuickSpecs
Configuration
HP Integrity rx5670 Server
Supported I/O Cards
I/O Card
Product Number
Connector
Type(s)
HP-UX
Yes
W indows
No
Linux
No
Boot Support
Yes
PCI 2 Gb/s Fibre Channel
Adapter
A6795A
LC
2-Gb Fibre Channel HBA
2-Gb Fibre Channel HBA
AB232A
AB234A
A6826A
LC
LC
LC
No
No
Yes
Yes
No
No
No
Yes
No
No
No
No
PCI-X Dual Channel 2GB Fibre
Channel HBA
Single-port U160 SCSI
Dual-port U160 SCSI
A6828A
A6829A
A7059A
VHDCI
VHDCI
VHDCI
Yes
Yes
No
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Single-port U160 SCSI (Windows
and Linux)
Dual-port U160 SCSI (Windows
and Linux)
A7060A
A9825A
A9826A
A9890A
A5838A
VHDCI
VHDCI
VHDCI
VHDCI
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Smart Array 5302/128 MB 2-
channel RAID Controller
Smart Array 5304/256 MB 4-
channel RAID Controller
Smart Array 6402 U320 2-
channel RAID Controller
Dual-port 100Base-T/Dual port
Ultra2 SCSI1
VHDCI/
RJ-45
Ultra2 LVD SCSI1
A5149A
A5150A
A6825A
A6847A
A7061A
VHDCI
VHDCI
RJ-45
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
No
No
No
No
Yes
No
No
No
No
No
Dual-port Ultra2 LVD SCSI1
1000Base-TX (gigabit copper)
1000Base-SX (gigabit fiber)
Duplex SC
RJ-45
1000Base-TX (gigabit copper,
Windows and Linux)
1000Base-SX (gigabit fiber,
Windows and Linux)
A7073A
Duplex SC
No
Yes
Yes
No
10/100Base-TX
A5230A
A5506B
RJ-45
RJ-45
Yes
Yes
No
No
No
Yes
No
No
4-port 100Base-TX Ethernet LAN
Adapter
PCI-X 2Gb Fibre
Channel/1000Base-SX Combo
Card
A9782A
A9784A
2 LC
Yes
Yes
No
No
No
No
Yes
Yes
PCI-X 2Gb Fibre
Channel/1000Base-T Combo
Card
1 LC, 1 RJ-45
FDDI Dual Attach Station LAN
Adapter
A3739B
A5513A
A5783A
FDDI SC
Duplex SC
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
PCI ATM 155 Mbps MMF
Adapter
PCI Token Ring 4/16/100
Adapter
RJ-45 and DB-9
8-port Terminal Multiplexer
64-port Terminal Multiplexer
HyperFabric 2 Fibre Adapter
Graphics/USB
J3592A
J3593A
A6386A
A6869A
J3525A
RS-232
RS-232 or RS-422
LC Duplex
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
No
No
No
No
Yes
No
No
No
No
No
No
X.25/SDLC/FR dual port
RS-530, RS-232,
V.35, RS-449 or
X.21
DA - 11719 Worldwide — Version 6 — July 2, 2004
Page 8
QuickSpecs
Configuration
HP Integrity rx5670 Server
1Ultra2 SCSI cards do not support boot or MC/Serviceguard.
Special Note on the Sm art Arry 5302 and 5304 Sm art Array RAID controller
The Smart Array controllers do not automatically rebuild the internal HDD array when a failed drive is replaced. HP expects to provide auto rebuild
capability in Q4 2003. Until that time, customers can deploy one of the following workarounds:
1. Reboot the server to begin the rebuild process after the failed drive is replaced.
2. Connect the second channel to the other side of the disk backplane and utilize the Hot Spare feature of the Smart Array (this will require an additional
HDD). See the Smart Array User Guide for more details on setting up the Hot Spare feature.
3. Existing HP Server rx5670 customers currently using the NetRAID 2M card with Windows may continue to use their existing controller for internal RAID.
The NetRAID 2M will automatically detect a failed drive when it is replaced and begins the rebuild process. This workaround is not available with Linux, as
the NetRAID 2M card is not supported in the Linux operating system.
Integrated M ulti-function The integrated multifunction I/O provides core I/O functionally and includes the management processor, which provides
Core I/O
remote management and high availability monitoring capabilities.
10/100/1000Base T LAN with RJ 45 connector-Supports LAN boot for operating system installation
External LVD Ultra160 SCSI (160 MB/s) port (Ultra160 is backward compatible with LVD Ultra2 and with SE SCSI)-
Order the appropriate cable to connect to external peripherals, example: VH to HD cable
Two internal dual-channel Ultra160 SCSI controllers. One channel per internal disk pair and one channel for the
removable media bay.
Integrated M anagem ent
Processor Functionality
Dedicated 10/100Base T LAN port for LAN console and embedded web console access
DB 25 serial port-multiplexed (using W cable) into three RS 232 ports: local ASCII console, remote/modem console,
and general purpose
Password protected console ports
Console mirroring between all local, modem, LAN, and web consoles
Remote power up and power down control
Configurable remote access control
Event notification to system console-Provides connectivity, information, and support for HP UX tools (such as STM
and EMS) to notify by email, pager and/or HP response centers.
Interface to system monitoring and diagnostic hardware via an internal IC bus
Secure Sockets Layer security on web console
Internal D isk D rives
The HP Integrity rx5670 supports up to four internal low profile or half height hot plug disk drives.
Two Ultra160 SCSI controllers provide each disk drive pair with an independent SCSI channel
Supported by MirrorDisk/UX across both disk drives and controllers
Supports Smart Array 5302 and 5304 Ultra160 SCSI RAID with Windows and Linux operating system. Order internal
Smart Array cables for the rx5670 (A9828A) to connect Smart Array card to internal drives
36 GB 15K, 73 GB 15K, and 146 GB 10K hot plug disks are supported
System Console
C onfigurations
The HP Integrity rx5670's integrated Management Processor provides five methods for console connections.
SSL secured Web console accessible through the 10/100Base T management LAN
Standard telnet connections accessible through the 10/100Base T management LAN
Local VT100 or hpterm terminal, or VT100 or hpterm emulator via local RS 232 serial connection
Remote VT100 or hpterm terminal, or VT100 or hpterm emulator via external modem
VGA graphics console using the A6869A graphics card - supported on Windows, Linux, and HP UX
DA - 11719
Worldwide — Version 6 — July 2, 2004
Page 9
QuickSpecs
Configuration
HP Integrity rx5670 Server
HP Integrity rx5670 Power The HP Integrity rx5670 provides a high level of integrated power protection:
Subsystem
N+1 redundant hotswap power supplies
N+1 redundant AC power input protection with electrical phase isolation
Power monitoring and control
The HP Integrity rx5670 supports up to three hotswap power supplies for N+1 protection. Two supplies are shipped as
standard and are required for correct system operation. The hotswap design allows for the online replacement of a power
supply when N+1=3 supplies are configured in the server.
The HP Integrity rx5670 provides an independent power input receptacle for each power supply. The independent design
provides protection against losing the connection from a power cord or breaker. The HP Integrity rx5670 power cords should
always be plugged into separate breakers when possible.
The chart below displays the AC power needs of the HP Integrity rx5670 at various configurations. These power figures are
based on actual measurements under typical server workloads, and are appropriate for power budgeting at customer
installations. Theoretically, a maximum configuration can draw up to 2,089 Watts AC. Power consumption at the
theoretical maximum is unlikely in typical server applications.
HP Integrity rx5670 AC Power Requirem ents at Various C onfigurations
CPUs
DIMMs
4
I/O Cards
Volt Am ps
510
W atts, AC
500
Amps @ 115V
Amps @ 230V
1
1
1
2
2
2
4
4
4
4
2
6
4.4
5.2
6.0
5.0
5.9
6.8
6.2
70.
8.0
8.5
2.2
2.6
3.0
2.5
2.9
3.4
3.1
3.5
4.0
4.2
16
32
4
595
583
10
2
690
676
575
563
16
32
4
6
673
660
10
2
784
768
707
693
16
32
48
6
803
787
10
10
914
896
971
952
DA - 11719 Worldwide — Version 6 — July 2, 2004
Page 10
QuickSpecs
Technical Specifications
HP Integrity rx5670 Server
Server model number
rx5670
Server product numbers
Server and one 1.3 GHz CPU
Server and one 1.5 GHz CPU
Number of Processors
A6837B
A6838B
1-4
Supported Processors
1.3-G Hz Intel® Itanium ® 2 processor
Cache
3 MB
Yes
Floating Point Coprocessor
included
TPM estimate
100 K
(4 way configuration)
1.5-G Hz Itanium 2 processor
Cache
6 MB
Floating Point Coprocessor
included
Yes
TPM estimate (4 way
configuration)
120 K
System Memory
Minimum memory
1 GB
Maximum memory capacity
96 GB
Internal D isks
Max. disk mechanisms
Max. disk capacity
4
438 GB
Standard Integrated I/O
Ultra160 SCSI-LVD
Yes
Yes
10/100/1000Base T
(RJ 45 connector)
RS 232 serial ports (multiplexed 3
from DB 25 port)
10/100Base T management
port (RJ 45 connector)
Yes
I/O buses and slots
Total PCI X and PCI Slots
10
3 133 MHz, 64 bit slots on 3 dedicated PCI X buses
6 66 MHz, 64 bit slots distributed on 3 PCI X buses; 2 slots per bus
1 33 MHz, 32 bit PCI slot; recommended for graphics card
M aximum M ass Storage
Host Bus Adapters (see
supported I/O table)
Ultra160 SCSI-LVD
10
Dual-port Ultra160 SCSI–LVD 10
Dual port HVD/FWD SCSI
10
Smart Array Ultra160 SCSI
RAID
9 (only 1 for internal drives)
2 Gb single port fibre channel 10
DA - 11719 Worldwide — Version 6 — July 2, 2004
Page 11
QuickSpecs
Technical Specifications
HP Integrity rx5670 Server
Maximum Network
Interface Cards (see
supported I/O table)
1000Base SX
1000Base TX
10/100Base TX
Dual port X.25
10
10
10
10
Electrical C haracteristics AC Input power
Hotswap Power supplies
Redundant AC power inputs
100 240V 50/60 Hz
2 included, 3rd for N+1
2 included, 3rd for N+1
Typical current requirements at 5 A (shared across inputs)
230V
Typical maximum power
dissipation
952 Watts
Theoretical maximum power
dissipation
2,089 Watts
Power factor at full load
0.98
Typical Heat dissipation
(BTUs/hour)
3,250
Maximum Heat dissipation
(BTUs/hour)
7,135
Site Preparation
Site planning and installation No
included
Depth (in/mm)
30.5 in (774 mm)
Width (in/mm)
19 in (482 mm)
Rack Height (EIA/in/mm)
Pedestal Height (in/mm)
Weight (lb/kg) Maximum
7 U/12.25 in/322 mm
14.5 in (368 mm)
161 lb (73 kg)
Environm ental
C haracteristics
Acoustics (operator/bystander) <7.5 Bels LwA
at 77° F/25° C)
Operating Temperature
(up to 5000 ft/1524 m)1
41° to 95° F (5° to 35° C)
Non-operating Temperature
-40° to 158° F (-40° to 70° C)
Maximum rate of temperature 10° C/hour
change
Operating relative humidity
15% to 80% RH non-condensing
5% to 90% non-condensing
Non-operating relative
humidity
Operating altitude above sea 1,0000 ft (3,000 m) maximum
level
Non-operating altitude above 1,5000 ft (4,600 m) maximum
sea level
1 Max operating temperature range up to 5000 ft. For higher altitudes de rate the max temperature by 2°C/1000 ft above 5000 ft.
Regulatory Com pliance
Electromagnetic
Interference
Safety
Complies with FCC Rules and Regulations, Part 15 as a Class A digital device.
Manufacturer's Declaration to EN55022 Level A, VCCI Registered, Class A, Korea RLL
UL Listed, CSA Certified, TUV GS Mark compliant with EN 60950 and EN 41003
DA - 11719 Worldwide — Version 6 — July 2, 2004
Page 12
QuickSpecs
Technical Specifications
HP Integrity rx5670 Server
© Copyright 2003-2004 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Intel and Itanium are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 11719
Worldwide — Version 6 — July 2, 2004
Page 13
|