Havis Shields Automobile C VS 1200 EXPL User Manual

INSTALL INSTRUCTIONS C-VS-1200-EXPL  
2002-2005 FORD EXPLORER  
TOOLS REQUIRED:  
Metric Socket Set  
Ratchet Wrench  
Phillips Screw Driver  
Panel Pulling Tool  
INSTALLATION:  
1. Remove O.E.M. Console  
7mm Screw  
Remove the one 7mm Hex head screw located in the  
accessory pocket of the O.E.M. Console:  
Un-plugged the factory 12volt outlet in order to  
completely remove “FACE” of O.E.M. console.  
Remove top “FACE” of O.E.M console. After Hex  
head screw is removed, simply pull straight up on  
“FACE” in the rear and then pull back to release the  
front of the console.  
Remove (2) 7mm hex head screws that attach the  
lower portion of the OEM console housing located under the HVAC controls.  
Remove (6) more 7mm screws located under the “Face” of the OEM console.  
Save all removed hardware, this will be used later to install the VS console.  
If equipped with the Traction control switch option, unplug and remove from OEM  
console.  
2. Install Explorer VS-Console:  
Place VS-Console where the “FACE” of the O.E.M console  
was originally located.  
Mount VS-Console using the (6) 7mm screws (removed  
earlier).  
If necessary, install traction control switch into the supplied  
plate.  
Mounting  
Hardware  
7mm Hex  
head screws  
“FACE  
C-VS-1200-EXPL-INST-8-05  
 

Grizzly Sander G1531 User Manual
Haier Microwave Oven HIL 2810EGCB User Manual
Harbor Freight Tools Chainsaw 97092 User Manual
Harbor Freight Tools Inflatable Bouncy Toy 95041 User Manual
Hasbro Motorized Toy Car 08625 User Manual
Heath Zenith Door 6153 62 71 72 User Manual
Hoshizaki Ice Maker DCM 300BAH OS User Manual
Hotpoint Oven 63210 User Manual
Hotpoint Stove GC640BK User Manual
ICP DAS USA Computer Hardware 3 axis encoder card 2 axis stepping servo User Manual